• Journal of the Korean Institute of Gas
• /
• v.26 no.5
• /
• pp.28-34
• /
• 2022

Since semiconductor factories are located in densely populated areas, safe handling of hazardous materials handled in the manufacturing process is of utmost importance. In particular, the types of hazardous substances discharged after handling in the semiconductor manufacturing process are very diverse, and the treatment methods such as combustion, absorption and adsorption methods for each material are very complicated. Therefore, in recent semiconductor exhaust treatment processes, two or more treatment methods are applied to one treatment facility, and unexpected accidents occur due to the application of such a complex treatment method. In this study, the cause of accidents in treatment facilities that applied both the scrubber method and the electrostatic precipitation method, which are recent accident cases, are identified, and preventive measures are suggested to find out the points to be noted when applying the complex treatment method.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.46 no.8
• /
• pp.12-17
• /
• 2009

We have implement어 a bust mode optical transmitter using digital temperature compensation architecture with a microprocessor. Instead of previous analog real time technique, we used digital sampling and holding technique for the temperature compensation in order to get stable high speed data transmission of the laser diode. This digital temperature compensation technique should be complemented the previous analog method with accuracy and effectiveness in the over Gb/s transmitting application.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.6B
• /
• pp.1100-1105
• /
• 2000

The most widely used radar pulse compression technique is correlation processing using Barker code. This technique enhances detection sensitivity but, unfortunately, suffers from the addition of range sidelobes which sometimes will degrade the performance of radar systems. In this paper, our proposed optimal algorithm eliminates the sidelobes at the cost of additional processing and is evaluated in the presence of Doppler shift. We then propose optimal codes with regard to the proposed algorithm and the performance is compared against the traditional correlation processing with Barker codes. The proposed processing using optimal codes will be shown to be superior over the traditional processing in the presence of Doppler shift.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.5
• /
• pp.1081-1086
• /
• 2011

Last port logistics for the EDI(Electronic Data Interchange) document processing system using a rapid increase in the complaint is handled. However, the existing system in a way that the script processing EDI documents, but the complexity of the script writing and document processing efficiency, lower consumption due to increased demand for processing has not kept up. Therefore, we changed the script in a way how to handle the binary system was designed and implemented. Also used for port logistics has developed 12 types of EDI documents. Accordingly, the document processing speed compared to existing methods are improved twelvefold port logistics system for processing EDI documents are expected to be utilized.

• Proceedings of the Optical Society of Korea Conference
• /
• 1991.07a
• /
• pp.85-95
• /
• 1991

앞으로 급증하는 막대한 정보의 처리를 위하여 기존의 전자공학적인 교환방식의 한계점을 광자공학적인 방식으로 처리해 몰려는 일환으로 광교환에 필요한 소재 및 소자, 교환방식에 근본이 되는 물리적인 개념과 광교환의 실현을 위한 접근방식에 대해 알아보고자 한다.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.40 no.6
• /
• pp.48-57
• /
• 2003

In this paper, An 8${\times}$l ID-IDCT processor with adder-based distributed arithmetic(DA) and bit-serial method Is presented. To reduce hardware cost and to improve operating speed, the proposed 8${\times}$1 ID-IDCT used the bit-serial method and DA method. The transform of coefficient equation results in reduction in hardware cost and has a regularity in implementation. The sign extension computation method reduces operation clock. As a result of logic synthesis, The gate count of designed 8${\times}$1 1D-IDCT is 17,504. The sign extension processing block has gate count of 3,620. That is 20% of total 8${\times}$1 ID-IDCT architecture. But the sign extension processing block improves more than twice in throughput. The designed IDCT processes 50Mpixels per second and at a clock frequency of 100MHz.

• Korean Journal of Cognitive Science
• /
• v.17 no.3
• /
• pp.177-190
• /
• 2006

Present study was investigated to measure the influence of expectancy on emotional information processing. For inducing an expectancy for emotional stimulus, participants conducted three same blocks in which negative face was presented for prime in 75% of total trials(Group1) or three same blocks in which positive face was presented in 75% of total trials(Group2). We compared the means of RTs of two blocks conducted after and before these induction blocks. Results exhibited that participants in Group 1 allocated more attention after expectancy induction. This indicate that in normal population, the top-down processing like expectancy can influence emotional processing pattern related to negative information.

• Journal of Advanced Marine Engineering and Technology
• /
• v.39 no.1
• /
• pp.19-27
• /
• 2015

As the recent regulation of Internaional Maritime Organization (IMO) is enforced, the advanced technology of Ballast water treatment system (BWTS) is needed to meet its requirements. Until now, there are two kinds of the BWTS technologies such as physical methods (Membrane and UV) and chemical methods (Chlorin and Ozone). However, these conventional methods have some limitations of auxiliary power, low productivity, residual treatment and etc. In order to overcome these problems, this paper introduces the new kind of BWTS based on mechanical principle and investigates the effect of rotating disc shapes on flow characteristics between rotating and stationary discs by computational fluid dynamics (CFD). Planar and Step types can make the local cavitation generated along radius, and Circular type can increase the intensity of shear stress.

• Journal of Internet Computing and Services
• /
• v.6 no.2
• /
• pp.49-57
• /
• 2005

Connector's role between components is very important in the CBD(Component Based Development). The most connector has process ADL based rrethod was choosing FIFO method by component request. But in case many component's with various characteristics request It is difficult that this method operate efficiently, In this research, I did design and implement priority connector considering component's processing time, Also, I used Wright architecture for formal specification. Application result of proposed connector was spend more 388ms compares with existent FIFO method in total processing time. But this method could handle preferentially from components that have short processing time. Also, in case of component's waiting time in connector, existent FIFO method is 23323,1 ms and proposal method is 12731.27ms, So, proposal method could reduce waiting time for component process.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2002.09a
• /
• pp.125-128
• /
• 2002

강변 여과 취수 방식을 활용한 국내 충적층 지하수의 이용을 위해서는 망간에 대한 수처리가 주요 사항인 것으로 나타났다. 강변 여과 방식 취수 원수의 망간 함량은 먹는 물 수질 기준을 부분적으로 상회하지만, 이러한 망간에 대한 저감 처리는 기존의 지표수를 취수하여 처리하는 수처리 공정에 비해서는 상대적으로 효율적인 것으로 판단된다. 실제로, 국내 최초의 강변 여과 방식 취수를 활용하는 창원시 대산 지구 원수는 공기 포기, 급속 여과, 활성탄 여과를 통해, 먹는 물 수질 기준을 상회하는 망간을 효과적으로 처리하고 있는 것으로 평가되었다. 특히, 활성탄 여과가 망간제거 효과를 보이는 점은 특이한 현상으로, 활성탄 내에서도 철 관련 박테리아에 의한 망간 처리 가능성을 시사하고 있다. 또한 망간과 함께 나타나는 철 성분은 망간의 침전 처리에 긍정적인 면으로 작용하는 것으로 판단된다. 한편, 고령군 다산면에서의 실증 플랜트 실험은 전염소처리와 망간접촉여과를 통해 먹는 물 기준 이하의 망간 함량을 확보하는 데는 성공하였으나, 이러한 처리 기작이 안정화되는데 까지는 약 3개월 내외의 시간이 요구되는 것으로 나타났다.