• Journal of the Korean Geotechnical Society
• /
• v.17 no.5
• /
• pp.181-196
• /
• 2001

지하구조물에 있어서 누수사고의 빈번한 발생 및 상습화 경향에도 불구하고 현재 국내에서 사용되고 있는 누수보수방법은 누수유형에 관계없이 일괄적으로 동일한 처리방식으로 보수하는 상황으로서 지하구조물 누수에 대하여 누수 유형별로 보수방법을 달리하는 적극적인 해결방안의 모색이 필요하다. 따라서, 본 연구에서는 지하구조물의 누수보수에 있어서 방수 그라우트재의 공학적 특성을 파악하고 현장상황에 적합한 방수그라우팅 기법을 수립하여 누수유형별로 적용한 사례를 중심으로 적용성을 고찰하였다. 방수그라우팅 적용사례를 분석한 결과 지하구조물의 누수방지를 위하여 누수상황 및 누수유형에 따라 주입재의 배합비를 적절히 변화시켜 주입재와 현장상황에 적합한 방수그라우팅 기법을 병행 적용하는 것이 확실한 방수효과를 얻을 수 있으며, 주입목표구간에 대해 단계적으로 수회로 나누어 순차적인 그라우팅과 가능한 한 저압, 소량, 장시간에 걸쳐 주입하는 것이 방수그라우팅 효과를 증대시킬 수 있는 것으로 판단된다. 또한, 현장 적용결과로부터 기존 방수이론의 영향요소에 추가하여 물시멘트비, 주입재의 입경, 주입시간 및 주입량, 혼화재 사용여부, 주입차수 등에 대한 다양한 영향요소의 검토가 필요한 것으로 판단된다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2012.05a
• /
• pp.686-686
• /
• 2012

일반적으로 첨두 홍수량 경감을 위하여 유역종합치수계획 등에서 많이 계획되고 있는 방수로는 방수로 종단에서의 방류 방식에 따라 크게 자기 완결 방식과 타 하천 또는 해양 방류 방식으로 구분할 수 있다. 일반적으로 타 하천 또는 해양 방류 방식을 방수로라 부르며, 홍수 방어의 대상이 되는 지역을 우회하여 다시 본천으로 합류하는 자기 완결 방식으로 계획되는 방수로 즉 홍수 방어용 수로를 분수로라 부른다. 방수로를 계획하는 경우 가장 중요한 것은 본류에서의 첨두 홍수량 분담이기 때문에 방수로로 유입되는 분류량을 정확히 예측하는 것이 매우 중요하다. 하지만 분수로의 경우 다시 본천으로 재합류하기 때문에 재합류되는 지역에서 본류의 유량이 다시 크게 증가하고, 합류점 상류에서 예상치 못한 홍수위의 상승이 발생할 가능성이 있다. 따라서 만약 합류부에서 유황에 대한 적절한 검토 없이 합류 지역을 설계하는 경우 예상치 못한 수위 상승 및 국부 유속 증가에 의한 홍수 피해가 발생할 가능성이 있다. 따라서 본 연구에서는 분수로 형태의 방수로가 일정한 합류각을 가지고 본류로 합류하는 경우 본류에서의 유황 변화 및 수위 상승이 어떠한 형태로 나타나는지 실험을 통하여 검토하고자 하였다. 합류하는 분수로의 폭은 본수로의 폭이 에 대하여 0.50B, 0.75B, 1.00B가 되도록 하였으며, 합류각은 본류와 분수로 사이의 예각이 75도가 되도록 하였다. 이러한 수로 제원에 대하여 본류 유량 및 유입량을 다양하게 변화시켜 합류부에서의 수위 변화를 검토하였다.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.5 no.4
• /
• pp.361-370
• /
• 2003

In this study, the performance of water tightness of water expansional sealing material and gasket was evaluated. The water tightness test was performed varying the type of inner pressure condition, for which the water expansional sealing material was inundated for 5 days to evaluate the ability of water tightness. In order to carry out this test, we made use of two types of water expansional sealing material; general type and combined type with non-expansional rubber. In the case of gasket, EPDM gasket and complex gasket sticked to the water expansional sealing material were applied. The performance of water tightness depended on the construction defect and the deformation of segment. The construction defect and segment deformation were generally expressed by gap and offset of the construction joint. The results, of tests showed that the performance of water tightness was largely influenced by the gap between segments. Management criteria of gap and offset were proposed.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.18 no.1
• /
• pp.68-74
• /
• 2014

Recently, concrete facility as advanced water treatment facilities is extending in the water treatment facilities according to raise awareness of pure drinking water and delicious water. For this reason, it is increased to the necessity need to make the standard and the development of waterproofing and anti-corrosion materials for concrete structures applied water treatment tank. So, related research has become active recently. However, as the limit of research focused on durability improvement of top coating material, it is insufficient to study on the adhesion strength between the concrete surface and primer. Therefore, there is to confirm the adhesion of between concrete surface and the three primers used as anti-corrosion waterproofing materials, and to investigate the properties of adhesion strength according to the condition such as dry condition, wet condition, and water pressure condition of the concrete surface in this study.

• Journal of the Korea Concrete Institute
• /
• v.17 no.1 s.85
• /
• pp.3-10
• /
• 2005

The purpose of this study is to investigate the properties of composite systems using polymer cement and epoxy resins for waterproofing and anti-corrosion to concrete structures such as water supply facilities and sewage-works. For the waterproofing and anti-corrosion of concrete structures, there can be required various properties such as absorption capacity and water permeability, adhesion and tensile strength, hair crack-resistance, impact-resistance, repeated low and high temperature test and chemical resistance, soundness for drinking water, soundness for drinking water and etc. In this study these engineering properties of composite systems using polymer-modified mortar and epoxy resins were examined and could be confirmed to satisfy the guidelines of KS. Especially, it was turn out that the adhesion properties was excellent and high crack-resistance up to 1.49 mm will be perform.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2017.05a
• /
• pp.236-237
• /
• 2017

This study discusses the development of waterproofing layer jet-spray nozzle that forms a three-dimensional air cell. This nozzle has an air flow generation mechanism in the air groove of the attachment cell part located at the end of the injection nozzle. Since the air grooves also function as an air curtain, the airborne particles generated when the waterproof material is sprayed is effectively blocked. In the past, spraying of the waterproof material through the high pressure was possible, but this technology allows stable injection due to the static agitation method, and various problems caused by particle generation has been (damages to neighboring areas, economic loss, etc.) minimized.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2017.05a
• /
• pp.137-138
• /
• 2017

The Waterproofing and Anti corrosion materials applied to the water supply facility did not consider environment of water supply facility, thus defects occurred consistently on the site. In this study, it suggests safety adhesion test of wet surface and have a test for safety adhesion performance.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2014.05a
• /
• pp.232-233
• /
• 2014

Recently, water treatment facility is usually eastablished in underground, and waterproofing and anti-corrosion materials for concrete structures applied water treatment tank is developing in various ways. However, as the limit of research focused on durability improvement of top coating material, it is insufficient to study on the adhesion strength between the concrete surface and primer. Therefore, there is to confirm the adhesion of between concrete surface and the three primers used as anti-corrosion waterproofing materials, and to investigate the properties of adhesion strength according to the condition such as wet codition and water pressure condition of the concrete surface in this study.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2011.11a
• /
• pp.161-163
• /
• 2011

Due to various kind of waterproof materials and methods, which is difficult to select the most appropriate to waterworks. The materials used to prevent the deterioration of the service life is short, because of the chemical erosion. So, in the 2010 Office of Waterworks Seoul Metropolitan Government has set new standards. Recently, SMC panel is a trend that is being applied to water treatment facilities. However, SMC panel has not yet implemented a performance evaluation. Therefore, this study to confirm that satisfaction for the Office of Waterworks Seoul Metropolitan Government of the performance requirements, when the applied the SMC panel to water treatment structure.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2005.05a
• /
• pp.113-117
• /
• 2005

The ceramic metal resin paints for waterproof and anti corrosion is not long history in development of materials even many actual result. So far, no standard have been given to construction and maintenance method, Quality and property, it is real state that cannot afford to proper quality control in job site or production. This study has been test for the ceramic metal resin paints for water and anti corrosion, as the result, it have proper performance of job site and mechanical performance of compare to other existing. In particular, tensile strength indicates more high about $14.1N/mm^2$ than epoxy resin paints, and in elongation per unit length is more high It is shows having better adhesive strength than epoxy resin paint for crack on the concrete structure. Moreover, The ceramic metal paint for water and corrosion proofing have to have main performance is watertightness and resistance for external impact, chloride ion permeation, drinkable water elution.