• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1992.10a
• /
• pp.107-112
• /
• 1992

선박 내부에 탑재된 추진 기계류에서 발생되는 진동은 마운트 Deck을 통하 여 선체에 전달되어 수중으로 전파된다. 기계류에 의해 발생되는 수중방사소 음을 감소시키기 위해서는 선체로 전달된 진동수준 및 수중방사소음 예측이 우선 중요하다. 수중방사소음 예측 방법으로 FEM과 BEM에 의한 저주파수 대역 예측, 전달함수에 의한 실험적 예측, SEA(Statistical Energy Analysis) 기법을 이용한 고주파수 대역 예측으로 나눌 수 있다. R.H.Lyon 등에 의해 발전된 SEA 기법은 항공기, 선박등 복잡한 구조물의 고주파수 대역 진동해 석에 널리 이용되고 있다. SEA 기법의 선박에 대한 적용은 소형선박의 기계 류에서 발생되는 진동에 의한 선체 진동수준 및 수중방사소음 해석 등에 적 용되고 있다. 본 연구에서는 보강 원통형 셀 모델에 대한 수중방사소음을 SEA 기법을 이용하여 예측하고 실험을 통하여 검증하였다.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.54 no.2
• /
• pp.146-150
• /
• 2017

In OFDM system, the out-of-band radiation of ensemble interferes with the adjacent ensemble and result in the reduction of receiving performance. So the reduction scheme of out-of-band radiation is very important. In this paper, a time-domain windowing method to reduce the out-of-band radiation is considered to DAB systems. We adopt the considered method to T-DMB(DAB mode-1) and AT-DMB Systems, and we get about 3-dB gains of out-of-band radiation. And also we show that the considered method doesn't reduce the BER performance.

• The Journal of the Acoustical Society of Korea
• /
• v.42 no.1
• /
• pp.1-6
• /
• 2023

Sound radiated from a structure in vibration is an important physical characteristic to evaluate vibro-acoustic problem. Although sound radiation power can be typically obtained by intensity measurement, long measuring time and strict measuring condition remain difficult. As an alternative method, simulation-based estimation can be taken into account and its accuracy is known to be acceptable. However, difficulty still lies in that specialized softwares may be necessary to obtain sound radiation power and radiation efficiency. In this context, this study suggests two methods using an ordinary FE method to calculate sound radiation power. They are well-known reciprocity technique and p-p method, which are basically test methods. It is shown that either method can practically estimate sound radiation in the frame of conventional Finite Element Method (FEM). The methods and their corresponding limit are discussed with some results.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.7
• /
• pp.2328-2333
• /
• 2010

A direct boundary element method(DBEM) is widely applied for various acoustic wave problems. But this method has numerically non-unique solutions around the eigenfrequencies of the interior Dirichlet problem for the region enveloped with the acoustic boundary. A CHIEF method had been generally adopted to resolve the non-uniqueness problem and a new technique called ICA-Ring method has been suggested recently. In this paper, the characteristics of two techniques for avoiding the non-uniqueness of DBEM are examined and numerical codes embodying both techniques are developed. Numerical calculations are also carried out for an uniformly pulsating sphere, of which the results are investigated by including the comparisons with theoretical solutions.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2022.05a
• /
• pp.362-365
• /
• 2022

최근 노동 집약적인 성격의 섬유 산업에서는 AI를 통해 공정에 들어가는 시간과 비용을 줄이고 품질을 최적화 하려는 시도를 하고 있다. 그러나 섬유 방사 공정은 데이터 수집에 필요한 비용이 크고 체계적인 데이터 처리 시스템이 부족하여 축적된 데이터양이 적다. 또 방사 목적에 따라 특정 변수 위주의 조합에 대한 데이터만을 우선적으로 수집하여 데이터 불균형이 발생하며, 물성 측정환경 차이로 인해 동일 방사조건에서 수집된 샘플 간에도 오차가 존재한다. 이러한 데이터 특성들을 고려하지 않고 AI 모델에 활용할 경우 과적합과 성능 저하 등의 문제가 발생할 수 있다. 따라서 본 논문에서는 물성 단위 및 허용오차를 고려한 이상치 처리 기법과 데이터 불균형 정도 및 물성과의 상관성을 고려한 오버샘플링 기법을 물성 예측 모델에 적용한다. 두 기법들을 모델에 적용한 결과 그렇지 않은 모델에 비해 물성 예측 오차와 방사 공정 데이터에 대한 모델의 적합도가 개선됨을 보인다.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.18 no.1
• /
• pp.11-22
• /
• 2023

A radiating elements fault diagnosis method with simplified radiation pattern measurement procedure was presented for planar active phased array antenna system. For presenting the mentioned method, the technique for linear approximation based on the radiation characteristics of a planar array configuration and a technique for solving a unique solution problem that occur in process of diagnosing a fault in a radiating elements were presented. Based on the presented method and a genetic algorithm, experimental simulations were performed for radiating element defect diagnosis according to various planar active phased array antenna configurations. As a result, it was confirmed that the presented radiating element fault diagnosis method can be smoothly applied to planar active phased antennas having various configurations.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2010.05a
• /
• pp.161-162
• /
• 2010

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2011.05a
• /
• pp.395-396
• /
• 2011

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2015.10a
• /
• pp.19-20
• /
• 2015

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.26 no.2
• /
• pp.129-137
• /
• 2008

This study focuses on the radiometric normalization, which is one of the pre-processing steps to apply the change detection technique fur hyperspectral images. The PIFs which had radiometric consistency under the time interval were automatically extracted by applying spectral angle, and used as sample pixels for linear regression of the radiometric normalization. We also dealt with the problem about the number of PIFs for linear regression with iteratively quantitative methods. The results were assessed in comparison with image regression, histogram matching, and FLAASH. In conclusion, we show that linear regression method with PIFs can carry out the efficient result for radiometric normalization.