• 한국소음진동공학회논문집
• /
• 제27권1호
• /
• pp.51-56
• /
• 2017

This paper presents an approach of predicting the radiated noise due to the structural vibration by internal harmonic forces using the doubly asymptotic approximation (DAA). Acoustic transfer vector is derived from the Helmholtz integral equation and the fluid-structure interaction relation of DAA. Numerical results and analytical results of radiated noise for a cylindrical shell were compared and showed that they were consistent in most of frequencies and radiation directions, but showed errors in some radiated directions in the mid-frequency region. Despite these errors, the prediction method will be suitable for practical radiated noise prediction.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 1993년도 춘계학술대회논문집; 한국과학연구소, 21 May 1993
• /
• pp.123-127
• /
• 1993

소음방사의 이해 및 효과적인 소음제어를 위해서는 소음원의 특성, 음장의 공간상 방사 특성 등을 아는 것이 중요하며, 이를 위해 많은 연구가 진행되 어 왔다. 특히 다수의 마이크로폰 어레이를 이용한 음향 홀로그래피 방법에 의한 실험적 음장 예측 방법이 소개되었고 연구가 진행됨에 따라 많은 실용 가능성을 보여 주었다. 음향 홀로그래피 방법에는 측정상 제한이 필연적으로 존재할 수밖에 없는데, 이에 따른 오차가 존재하며 결국 예측음장의 신뢰도 를 떨어뜨리는 요인이 된다. 본 연구의 목적은 측정조건에 따른 오차의 요인 을 고찰하고 이를 정량적으로 표현함으로써 음향 홀로그래피 방법의 적용에 도움을 주고자 한다. 평면 음향 홀로그래피에 나타나는 오차는 둘러 싸기 오 차(wraparound error), 앨리애싱(aliasing), 창문영향(window effect)으로 나 눌 수 있는데, 오차는 측정구경의 크기와 마이크로폰 사이의 간격등의 측정 조건 뿐만 아니라 음원의 특성, 홀로그램 평면의 위치 등에 직접적인 영향을 받게 된다. 본 연구에서는 오차해석을 위한 기본 연구로써 점음원(monopole) 과 쌍극자(dipole)음장의 파수 스펙트럼을 해석적으로 구하고 이를 기본으로 평면 음향 홀로그래피 적용시 존재하는 앨리애싱에 대해 고찰하고 전산기 모의 실험 (computer simulation)을 통해 오차를 최소화하는 측정조건을 제 시하고자 한다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 추계학술대회논문초록집
• /
• pp.337.1-337
• /
• 2002

In order to control the railway noise, the radiation characteristic of the noise during the train passage should be analyzed. Generally, the major noise sources for Korean Train Express are the rolling noise and power unit noise up to 300km/h. In this paper, we describe on a train model that is considered to be a row of point sources to calculate the radiation characteristic. The calculation results are compared with short distance measurement. (omitted)

• 소음진동
• /
• 제8권5호
• /
• pp.908-913
• /
• 1998

Analogous problem for a gear dynamics where helical gears excite logitudinal forces in the shaft is studied. These shaft forces excite the supporting gear housing through bearing, causing structural vibration. In this study, shaft is modeled as a rod, and bearing is modeled by a massless spring. A simple model for gear housing is a clamped circular plate. To model this force transmission, the transfer functions from the shaft to a clamped circular plate are analytically derived by using the spectral method and four-pole parameter. Finally, radiated noise is computed, using the acoustic relations due to plate surface vibration.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2008년도 춘계학술대회논문집
• /
• pp.529-533
• /
• 2008

Recently in Korea, noise is one of the most important social issues because the living standard becomes more higher. Railway noise is also annoying one in our society, although railway has very positive role in our country. The major measures for mitigation of railway noise in Korea are rail welding and installation of noise barrier on the noisy area. But these measures have its own limit for the calm and comfortable living environment. In Europe the railway noise problem has been treated more systematically and aggressively, there has been emission noise standard for Trans-European rail network. In this paper, the trend of noise standard for railway vehicles will be reported and the check point for our country will be discussed.

• 한국소음진동공학회논문집
• /
• 제15권4호
• /
• pp.412-420
• /
• 2005

This article proposes analytical solutions for sound radiation from radial vibration modes of a thick annular disk. Structural eigensolutions are calculated using the transfer matrix method. The far-field sound pressure distribution is obtained using two alternate methods. In the first method, pressure is calculated using the Rayleigh integral technique. The second method treats sound radiating radial surfaces as cylindrical radiators of finite length. The Sinc function approach is employed for calculations. Acoustic powers and radiation efficiencies of radial modes are also determined from the far-field sound pressure calculations. Analytical predictions match well with measured data as well as computational results from a finite element code in terms of structural eigensolutions and from a boundary element code in terms of sound pressure, directivity etc.

• 한국소음진동공학회논문집
• /
• 제16권3호
• /
• pp.233-239
• /
• 2006

The effect of the joint condition of automotive muffler shell and baffle on radiated noise from muffler shell Is studied. Shell vibration characteristics, especially shift In natural frequency and change in of response amplitude, was identified from finite element analysis and modal tests for various joint conditions between shell and baffle. When there is heat expansion and inner pressure from the exhaust 9as in the muffler with elliptical cross section, the shell expands out, and construct gap with baffles. This gap causes more degrees of freedom of shell vibration and natural frequency shift. By welding the muffler shell to the baffles or using a dual shell muffler, the radiated noise problem could be mitigated supplying more a rigid joint and damping, respectively.

• 소음진동
• /
• 제8권4호
• /
• pp.603-608
• /
• 1998

In order to obtain basic data for the prediction of railway noise propagation, the noise radiation characteristics (source position, radiation directivity, etc) of trains were measured by using the sound intensity method. The measurements were performed at a side of railway by setting an intensity-probe array. As the measurement results, it was found that rolling noise due to interaction between wheel and rail and motor noise radiation from the lower part of train are dominant. The location of main sound sources can be described as being at the height of 0.1m in the center line of track, and the radiation directivity in the cross section of actually running trains are presented as a dipole source.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 춘계학술대회논문집
• /
• pp.1081-1085
• /
• 2002

A modeling is developed to predict the isolation performance of sound barrier systems under the sound pressure radiated from excited by point impact. The predicted results are compared with the measured results obtained by using APAMAT II. This instrument provides a combination of structure-borne noise and air-borne noise, which corresponds to rolling noise, by applying the excitation system projected steel balls against the steel sheet.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2014년도 추계학술대회 논문집
• /
• pp.134-137
• /
• 2014

The noise reduction performance of a passive facility is dependent on the its length or volume. In other words, this means that the larger the size of passive facility is, the better the noise reduction performance is. The sound directivity control has been proposed as an alternative for the noise reduction without a passive facility. The purpose of this study is to investigate the correlation between the flange attached to inclined exit of the tube and sound directivity when the sound radiates from the tube to the outside. As a result, the sound radiated from flanged tube had weak sound directivity in the wide angle. Also as the flange was bigger, the sound pressure level was lower in the behind the flange.