• Journal of the korean academy of Pediatric Dentistry
• /
• v.30 no.2
• /
• pp.298-307
• /
• 2003

The purpose of this study was to investigate the distribution and differences of the cephalometric measurements between normal occlusion and the class III malocclusion. Kim's analysis was achieved and compared on both the 141 elementary school students with proper profile and normal occlusion and the class III malocclusion group at the age of 7 to 9, in Gwang-ju area and the results were as follows; 1. The ODI, APDI, IIA, UL showed statistically significant differences between normal occlusion and class III malocclusion(p<0.01). But, no significant difference existed in both CF and EI. 2. The mean value of ODI was 72.62, APDI 80.47 IIA 121.37 in normal occlusion. 3. The mean value of ODI was 64.45, APDI 87.31 IIA 129.89 in class III malocclusion. 4. ODI decreased as APDI increased, and the correlation coefficient was -0.576 in both normal occlusion and class III malocclusion. 5. The correlation coefficient related to EI was CF 0.777, LL -0.670, UL -0.588, IIA 0.485. It means that UL and LL were very sensitively reflected on EI.

• Journal of the Korean Society of Radiology
• /
• v.12 no.2
• /
• pp.217-223
• /
• 2018

This study to search the diagnostic performance of shear wave elastography(SWE) in breast mass and to compare the biopsy result and stiffness obtained from shear wave elastography. Diagnostic breast ultrasonography and SWE were targeted for 157 patients who had breast ultrasonography was diagnosed mass from June 2017 to September 2017. Pathology results of 157 patients showed a benign 92 patients(Age, $44.54{\pm}11.84$) and a malignancy 65 patients(Age, $51.55{\pm}10.54$). Final evaluation, biopsy result, and quantitative SWE result were obtained and compared with each other according to Breast Imaging Reporting and Data System(BI-RADS) of diagnostic breast ultrasonography. Quantitative SWE value and pathologic result showed the highest diagnostic specificity of 83.70% in Emean and sensitivity of 89.23% in Emin. Quantitative SWE result and biopsy result is statistically significant.(p=0.000). The optimal cut-off value for malignant lesions was 66.3 kPa and 63.7 kPa, respectively, for the sensitivity, specificity, high maximum mean elasticity value(Emax) and mean elasticity value(Emean) and this showed the highest diagnostic area under the ROC curve(Az) value compared to other SWE measurement(p=0.000). The addition of SWE to conventional US in breast mass make a increase diagnostic specificity and reduce unnecessary biopsy. Therefore, it is expected that it will be helpful to analyze the breast mass using the above analysis and apparatus.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.45 no.1
• /
• pp.1-9
• /
• 2018

The purpose of this study is to identify the factors affecting the treatment outcome after surgical-orthodontic treatment of the maxillary impacted incisors using multiple regression analysis. The study enrolled 83 patients who had surgical-orthodontic treatment in impacted maxillary central incisor between January 2005 and December 2015. Possible explanatory variables related to the prognosis of impacted incisor were age, gender, tooth developmental stage, height, position and angle of the teeth. The results of multiple regression analysis showed that as the height of the stem cell from apical papilla (SCAP) increased, the tooth length ratio increased by 0.345 units (p < 0.01). There was no statistically significant difference in gender, tooth development stage, distance and angle between the center line and the tooth, and the height of incisal tip of the tooth. In conclusion, the height of the SCAP of the impacted central incisor is factor affecting the tooth length after orthodontic traction.

• Journal of Radiation Protection and Research
• /
• v.29 no.2
• /
• pp.141-150
• /
• 2004

Dose rate characteristics of cosmic radiation field at flight altitudes were analyzed and the route doses to the personnels on board due to cosmic-ray were calculated for Korean-based commercial international airline routes using CARI-6. Annual individual doses to aircrew and the collective effective dose of passengers were estimated by applying the calculated route doses to the flight schedules of aircrew and the air travel statistics of Korea. The result shows that the annual doses to aircrew, around 2.62 mSv, exceed the annual dose limit of public and are comparable to doses of the group of workers occupationally exposed. Therefore it is necessary to consider the frequent flyers as well as the aircrew as the occupational exposure group. The annual collective dose to 11 million Korean passengers in 2001 appeared to be 136 man-Sv. The results should be modified when the dose rates of cosmic radiation at high altitude are revised by taking into account the changes in the radiation weighting factors for protons and neutrons as given in ICRP 92.

• Progress in Medical Physics
• /
• v.13 no.3
• /
• pp.109-113
• /
• 2002

In recent years, the radiotherapy equipment has become much more sophisticated, and with the complication comes an increased set of quality assurance (QA) responsibilities. Today's computer controlled linear accelerator requiring QA of not only the radiation integrity, but also the mechanical accuracy of the linear accelerator. The existing QA sheets are adequate for acceptance testing and commissioning but those sheets are somewhat descriptive form for routine QA. establishing the QA sheets for a facility are more efficient if the sheets could estimate the long-term stability for the result of QA. We are going to develope new prototype of mechanical QA sheet to visualize and to verify long-term stability of mechanical QA for clinical linear accelerator. The items included in mechanical QA sheet were 1) gantry rotation, 2) collimator rotation, 3) couch rotation, 4) optical distance indicator (ODI), and 5) laser alignment. We compared new prototype sheet with conventional sheet for several hospitals in Korea for those items. The QA acceptance criteria in this study mainly followed published recommendations. The contents of test for mechanical QA are the following. Confirm that the digital and/or mechanical gantry angle readouts are correct. Verify that digital and/or mechanical readouts of collimator angle agree with the true angle, as determined with the protractor. Measure the light field using a graph paper and compare with the digital readouts. Confirm digital readout accuracy. Verify that the sagittal laser, the left and right lasers, and the ceiling laser intersect at the isocenter. In the design of new QA sheet, we emphasized the representation of the long-term stability of mechanical QA by using Excel program. By using the new prototype QA sheet, we simplified and visualized the mechanical QA process, and could estimate the long-term stability of mechanical error of linear accelerator.

• Journal of Convergence for Information Technology
• /
• v.11 no.7
• /
• pp.189-194
• /
• 2021

The purpose of this study was to investigate the effect of reducing noise and streaking artefacts by applying the Boost3D algorithm in the case of noise and streaking artifacts generated during computed tomography of the shoulder joint. A phantom study using a thoracic phantom including shoulder joint and clinical evaluation were conducted through shoulder joint images of 35 patients who underwent computed tomography of the shoulder joint from September 2020 to October 2020. The evaluation was divided into groups before and after the application of the Boost3D algorithm, and the noise values, signal to noise ratio, and mean to standard deviation ratio values were analyzed. Both noise values and mean to standard deviation ratio values analyzed in phantom image evaluation and clinical image evaluation were statistically significantly lower in the group after Boost3D was applied (p<0.05). Through this study, it was found that noise and streak artifacts were reduced through the application of Boost3D, and the mean to standard deviation ratio was high, which can be judged as an excellent image. If the Boost3D algorithm is used for computed tomography of the shoulder joint, it is thought that excellent images can be obtained with reduced noise and streaking artifacts that may occur in the shoulder joint area.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.49 no.1
• /
• pp.65-75
• /
• 2022

The aim of this study was to evaluate QLF (quantitative light-induced fluorescence) technology for the caries detection in primary teeth and validate the relationships between the cavity volume of carious lesions and QLF analysis results. Total 125 tooth surfaces include 53 occlusal surfaces, and 72 proximal surfaces were investigated with the portable QLF device for detection of dental caries in primary molars. Micro-CT radiograph was also performed to classify carious lesions and calculate the cavity volume. QLF showed good accuracy and reliability (sensitivity 0.75 - 0.94, specificity 0.82 - 0.95, and AUROC 0.88 - 0.98) for the caries detection in primary teeth except 𝚫R average results of proximal caries which showed relatively low values. Statistically significant relationships were found between 𝚫F average, QS-Index and the cavity volume according to Spearman rank-order correlation coefficients (r = 0.805 - 0.832, p < 0.001). QLF detection method would be a harmless and reliable way for children to diagnose dental caries without the concern about radiation exposure.

• Journal of radiological science and technology
• /
• v.30 no.4
• /
• pp.373-379
• /
• 2007

Purpose : There is difference between PET and PET/CT method on their transmission image for attenuation correction. The CT image is used for attenuation correction on PET/CT and the parameters of CT may be affected on PET image. We performed the phantom study to evaluate whether the change of CT parameters(kilovolts peak and milliampere) affect standardized uptake value(SUV) on PET image. Material and Method: The data spectrum lung phantom containing diluted [18F]fluorodeoxyglucose ([18F]FDG) solution(1.909 mCi for phantom 1, $913\;{\mu}Ci$ for phantom 2) was used. The CT images of phantom were acquired with varying parameters (80, 100, 120, 140 for kVp, 10, 20, 30, 40, 50, 60, 70, 80, 90, 100 for mA). The PET images were reconstructed with the each CT images and SUVs were compared. Result : The SUVs of phantom 1 reconstructed with each 80, 100, 120 and 140 kVp showed $12.26{\pm}0.009$, $12.27{\pm}0.005$, $12.27{\pm}0.006$ and $12.27{\pm}0.009$, respectively. The SUVs of phantom 2 revealed $4.52{\pm}0.043$, $4.53{\pm}0.004$, $4.52{\pm}0.007$ and $4.52{\pm}0.005$ with elevation of voltage. There was no statistically significant difference of SUVs between groups based on various kVp. Also SUVs of phantom 1 and 2 showed no significant change with elevation of milliampere in CT parameter. Conclusion : The parameters of CT did not significantly affect SUV on PET image in our study. Therefore we can apply various parameters of CT appropriated for clinical conditions without significant change of SUV on PET CT image.

• The Journal of the Korea Contents Association
• /
• v.12 no.12
• /
• pp.329-334
• /
• 2012

For the dosimetry of the radiation workers, film badge, Thermo Luminescent Dosimeter (TLD), and glass dosimeter are being used and recently, there is a growing trend of using Optically Stimulated Luminescence Dosimeter (OSLD) in the world. However, OSLD is only being applied some of the field in Korea and there has been almost no study made related to OSLD. Thus, the accumulated radiation dose of TLD and OSLD that have been most frequently used in the field was compared in the radiation workers of nuclear medicine and their working areasfor 3 months. As a result, the average surface dose showed 0.85 mSv difference with 1.27 mSv for TLD and 2.12 mSv for OSLD while having 0.73 mSv difference for the average depth dose with 1.33 mSv for TLD and 2.06 mSv for OSLD. The surface dose and depth dose of OSLD showed statistically significant result with higher measurement (p<0.05).

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.6
• /
• pp.519-525
• /
• 2018

The purpose of this study was to identify the incidence of neutropenia in patients with breast cancer who received chemotherapy and to identify the differences in incidence according to influential factors. We analyzed the medical records of 353 breast cancer patients who received chemotherapy at university hospital in Seoul, Korea from January 2010 to March 2016. The collected data were analyzed by descriptive statistics, $X^2-test$, and logistic regression analysis using SPSS 20.0. Among the 353 subjects, 33.1% had neutropenia, and the factors that showed significant difference according to neutropenia were exercise performance, RT status, and regimen. The results of this study suggest that it is important to predict the prevalence of neutropenia in breast cancer patients receiving chemotherapy and to provide appropriate education and nursing intervention.