• Progress in Medical Physics
• /
• v.26 no.4
• /
• pp.280-285
• /
• 2015

In radiation therapy fields, a brachytherapy is a treatment that kills lesion of cells by inserting a radioisotope that keeps emitting radiation into the body. We currently verify the consistency of radiation treatment plan and dose distribution through film/screen system (F/S system), provide therapy after checking dose. When we check dose distribution, F/S systems have radiation signal distortion because there is low resolution by penumbra depending on the condition of film developed. In this study, We fabricated a $HgI_2$ Semiconductor radiation sensor for base study in order that we verify the real dose distribution weather it's same as plans or not in brachytherapy. Also, we attempt to evaluate the feasibility of QA system by utilizing and evaluating the sensor to brachytherapy source. As shown in the result of detected signal with various source-to-detector distance (SDD), we quantitatively verified the real range of treatment which is also equivalent to treatment plans because only the low signal estimated as scatters was measured beyond the range of treatment. And the result of experiment that we access reproducibility on the same condition of ${\gamma}$-ray, we have made sure that the CV (coefficient of variation) is within 1.5 percent so we consider that the $HgI_2$ sensor is available at QA of brachytherapy based on the result.

• Journal of the Korean Society of Radiology
• /
• v.15 no.2
• /
• pp.257-263
• /
• 2021

This study derives the relative cross-section for the natW(p,xn)176Re nuclear reaction by measuring the gamma rays generated from the nuclear reaction with natural tungsten using a 100 MeV linear accelerator of the Korea Multi-purpose Accelerator Complex in the Korea Atomic Energy Research Institute. In general, research on isotopes with a short half-life always shows a tendency that the intensity of radioactivity decreases rapidly within a short period of time, making it very difficult to measure itself. In particular, 176Re is one of the relatively short radionuclides with a half-life of 5.3 minutes. In this study, 109.08 keV gamma rays generated from the 176Re isotope having such a short half-life were measured using a high-purity Ge detector(HPGe detector). The obtained relative measurements were the results in the 8 to 14 MeV proton energy domain published by Richard G. in 1967, and the TENDL-2019 value, which was the result of A. J. Koning in 2019, which evaluated the nuclear reaction cross-section by calculation based on this comparative analysis was performed. The results of this study are expected to be usefully applied to the design of nuclear fusion reactor which is known as future energy sources, elements ratio for the nuclear synthesis of astrophysics.

• Journal of Korean Society of Environmental Engineers
• /
• v.22 no.6
• /
• pp.1149-1158
• /
• 2000

A radioisotope tracer experiment was carried out in the submerged fixed bioreactor of a dye wastewater treatment facility to evaluate the flow behaviors in the 6 compartments of the reactor and to find any possible factors which may affect to the efficiency of the process. Approximately 20mCi of $^{131}I$ was injected into the system as a tracer and 8 radiation detectors were placed in the 6 compartments and at the inlet and the outlet of the system to measure the change of the tracer concentration with time. Using the Perfect Mixers in Series Model the measured data were analyzed to calculate the mean residence time and the characteristic parameters of the flow in the system. The mean residence time of the system was calculated as 17 hours which is 76% of the designed MRT(22.3hr). Among the 6 compartments, the first compartment doesn't show the characteristic of perfect mixer, whereas, the other 5 compartments are working as perfect mixers. The output response of the first compartment is fit well with the simulated output of a model which consists of a perfect mixer with an exchange volume. It indicates that a quarter of the tank volume is working as a dead volume or an exchange volume. From the measured residence time distributions in each compartment, the appropriate sampling times after the change of operational condition of the electron beam accelerator were evaluated.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.39 no.6
• /
• pp.42-48
• /
• 2002

The design, construction and performance test of a convenient multi-purpose irradiator is described. A multi-purpose irradiator using Cesium-137 has been developed for studies of low dose radiation effects in biology and for calibration of Thermo Luminescent dosimeter(TLD). During the operation, three rods of radioactive material which are 10cm in length revolve 180 degrees and irradiate biological samples, or TLD, and return to their shielded position, after the programmed time. A programmable Logic Controller(PLC) controls the sequence of operation, interlock, motor rotation and safety system. The rotation speed of biological samples can vary up to 20 RPM. A real time monitoring system was also incorporated to check and control the operation status of the irradiator. The capacity of the irradiation chamber was 4.5 liters. The isodose distribution at arbitrary vertical planes was measured by using film dosimetry. The dose-rate was 0.13 cGy/min in air and 0.11 cGy/min in water equivalent material in the case of Cesium-137. Range of activity was 2 Ci. The homogeneity of dose distribution in the chamber was ${\pm}$7%. The actual radiation level on the surface was within permissible levels. The irradiator had a maximum 0.35 mR/min radiation leakage on its surface.

• Journal of radiological science and technology
• /
• v.33 no.4
• /
• pp.387-394
• /
• 2010

In the field of healthcare, the conventional sterilization treatments have been replaced by irradiation methods which are in accordance with internationally well established quality standards. The quality control in radiation sterilization assures that the absorbed dose of the irradiated material is in agreement with its requirements and standards. The electron beam irradiation requires technical assessments of more process parameters than gamma irradiation does. Korea has witnessed wide uses of electron accelerators since early 2000 but there hasn't been research experiences relating to quality system in accordance with international standards. The new large scale e-beam irradiation system with the specification of 10 MeV, 8 kW was installed and operated in 2008 by Seoul Radiology Services Co. It consists of the electron accelerator, product handling system, safety, documentation and control subsystems into an integrated system to meet the requirement of the Good Manufacturing Practice such as process quality assurance and management of product tracking records. To implement the international standard such as EN ISO11137, it is necessary to understand the purposes aimed in the standard and carry out the tests following the procedures required. This study presented the specification of the e-beam facility and showed what its design requirements and features are. The test results on a variety of process parameters were presented and validated it they are within the required limits.

• Investigative Magnetic Resonance Imaging
• /
• v.13 no.2
• /
• pp.190-194
• /
• 2009

Generalized lymphangiomatosis is a rare congenital malformation of the lymphatics. CT and MR scan have been used to evaluate lymphangiomas, which appear as large multicystic fluid-filled masses. CT and MR Imaging findings are often helpful in distinguishing lymphangiomas from various vascular disorders. We report the findings of CT, MRI and bone scan in a patient with generalized cystic lymphangiomatosis. Whole body 3.0-T MR scan using STIR sequence with a larger FOV could detect the additional lesions that were not seen at other imaging modalities. We believe that whole body 3.0 T MR imaging is a good modality to evaluate the extent of the disease and following up the patients with the generalized cystic lymphangiomatosis.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.16 no.4
• /
• pp.473-476
• /
• 1994

This is a case report on the lipoma of the parotid gland. Lipomas are common soft tissue neoplasms found only rarely in the region of the parotid gland, and therefore often not considered in the initial differential diagnosis of a mass presenting in this region. Clinically they can be confused with other being lesions and there was no reliable methods to make a preoperative diagnosis of the lipoma until 1980's; however, CT allows a specific diagnosis to be made in virtually all case. We experienced that CT imaging permit the preoperative diagnosis of the lipoma, so could remove it preserving the parotid gland.

• Korean Journal of Head & Neck Oncology
• /
• v.8 no.1
• /
• pp.1-5
• /
• 1992

기관연골까지만 침윤된 갑상선암에서 침윤된 기관연골을 면도식으로 깍아 내는 술식을 선택했을때 효과적인 치료방법이 되는가를 알아보기 위하여 본 연구를 실시하였다. 1979년 부터 1988년까지 10년간수술이 시행된 갑상선암환자 432예중 기관연골까지만 침윤된 환자는 16예 이였다. 남자가 3예, 여자가 13예 이었으며, 이들의 평균 연령은 55.8세 이었고, 조직학적으로는 유두상암이 14예, 여포상암이 2예 였다. 전예에서 침윤된 기관연골을 면도식으로 깍아내였으며, 수술후 보조치료로 방사성 동위원소 치료나 외부 방사선 조사를 추가하였고, 또한 갑상선 홀몬 투여로 TSH 억제 치료를 하였다. 평균 추척 기간은 67.7개월이었다. 16예중 무병생존은 4예에 불과하였고, 12예가 치료에 실패했는데 이중 7예는 갑상선암의 재발로 사망하였다. 이상의 결과로 면도식 절제술은 갑상선암이 기관연골에 침윤되었을 때의 술식으로는 부적당하며 무병 생존율을 향상시키기 위해서는 비록 표재성인 기관연골 침윤이라도 기관제술과 같은 적극적인 술식 선택이 바람직하다고 사료되었다.

• Journal of Radiation Protection and Research
• /
• v.35 no.3
• /
• pp.105-110
• /
• 2010

Using N-type HPGe gamma spectrometer, uranium analysis technique of soil sample is developed where the chemical preprocessing is not a necessity. The results of uranium activities using the method presented in this paper were compared with those results with conventional alpha spectrometer and two results were similar from within uncertainty range. Therefore, this new method will be applied in uranium activity analysis of soil sample.

• Journal of Korea Foundry Society
• /
• v.27 no.5
• /
• pp.224-227
• /
• 2007

원자로에 장전되는 $^{99}Mo$ 조사표적을 제조하기 위한 우라늄박판은, 박판 품질, 생산성, 경제성 문제로 인해, 기존의 열간압연방법에 의해 실험실 규모로는 제조가 가능하나, 상용 규모로는 제조되기 어려운 실정이므로, 새로운 제조방법의 개발이 요구되고 있다. 이와 같은 상황에서, $^{99m}Tc$의 모핵종인 방사선 동위원소$^{99}Mo$ 생산하기 위하여 planar flow casting (PFC) 법에 의해 다결정질 우라늄박판에 대한 새로운 제조방법이 연구되었다. $100{\sim}150\;{\mu}m$의 두께 및 너비 약 50mm의 연속적인 다결정질 우라늄박판이 하나의 batch에서 5m 이상의 길이로 제조되었다. 우라늄박판은 불순물이 거의 없었으며 양호한 표면조도를 가지고 있었다. 우라늄박판의 냉각를 접촉표면은 자유표면 보다 매끈한 자유표면을 가지고 있었다. 우라늄박판은 제조공정변수와는 상관없이 ${\alpha}-U$ 상을 가진 약 10 ${\mu}m$ 이하의 미세한 다결정립을 가지고 있었다.