• Journal of Korean Society of Transportation
• /
• v.26 no.5
• /
• pp.227-235
• /
• 2008

This study analyzed the efficiency of a trunk with branches and a trunk with feeders route system comparing the user cost and operator cost of those route systems. Basically, a trunk with branches is more efficient than a trunk with feeders in the passengers' perspective if the transit system of a trunk and feeders are the same. In the case that the trunk system is hierarchically higher than the feeder system, a trunk with feeders has the competitive edge over a trunk with branches if the saving of travel cost induced by using the trunk line is larger than the increasing waiting and transfer cost. This result is consistent with the previous research by Park et al.(2007c), which analyzed the efficiency of hierarchical structure in a grid transit network. If the travel demand of each origins and destinations is low, increasing headway according to the travel demand can increase passenger load or operating efficiency in a trunk with feeders route system. In this case, a trunk with feeders route system is more prevalent as the operating cost, route length, and number of destinations increases, while it is less prevalent as the transfer cost and passengers' time value of the waiting time increases. In cases that central business district, which is located in the middle of a trunk line, generates travel demand, a trunk with feeders is more efficient than a trunk with branches with the increasing travel demand from and to the CBD. Therefore it can be concluded that to have a dual operating system between CBD and suburban is more efficient than one type transit system. The efficiency of that system can be increased through an efficient transfer system that can reduce the transfer cost.

• Progress in Medical Physics
• /
• v.19 no.3
• /
• pp.164-171
• /
• 2008

One of the most important task in commissioning intensity modulated radiotherapy (IMRT) into a clinic is the characterization of dosimetry performance under small monitor unit delivery conditions. In this study, method of evaluating dose monitor linearity, beam flatness and symmetry, and MLC positioning accuracy using a diode array is investigated. Siemens Primus linear accelerator (LA) with 6 and 10 MV x-rays was used to deliver radiation and the characteristics were measured using a multi array diodes. Monitor unit stabilities were measured for both x-ray energies. The dose linearity errors for the 6 MV x-ray were 2.1, 3.4, 6.9, 8.6, and 15.4 % when 20 MU, 10 MU, 5 MU, 4 MU, and 2 MU was delivered, respectively. Greater errors were observed for 10 MV x-rays with a maximum of 22% when 2 MU was delivered. These errors were corrected by adjusting D1_C0 values and reduced to less than 2% in all cases. The beam flatness and symmetry were appropriate without any correction. The picket fence test performed using diode array and film measurement showed similar results. The use of diode array is a convenient method in characterizing beam stability, symmetry and flatness, and positioning accuracy of MLC for IMRT commissioning. In addition, adjustment of D1-C0 value must be performed when a Siemens LA is used for IMRT because factory value usually gives unacceptable beam stability error when the MU/segment is smaller than 20.

• Journal of Radiation Protection and Research
• /
• v.11 no.1
• /
• pp.51-56
• /
• 1986

It is important to measure and protect from the radiation space dose and induced activity at the high energy medical linear accelerator facilities. These are to consider the additional risk to patients undergoing treatment, machine operators and staff members. Measurements of the space dose distribution and induced radioactivity at the 18 MeV medical linear accelerator facility in the Yonsei Cancer Center. 1. Exposure space dose for 300 rads monitor doses of 18 MeV electron are measured as 50 mR at 1 meter from patients. 2. Exposure space dose for 300 rads monitor doses of 10 MV X-ray are detected as 350 mR at 1 meter from phantom. 3. Induced radioactivity by photonuclear reaction was measured as 0.65 mR/hr from collimater after 30 Gy(3,000 rads) irradiated. 4. Analyzing the decay curves and energy spectrum of induced radioactivity, detected a few materials to be activated by photoneutron reaction, $^{65}Cu({\gamma}{\cdot}n)\;^{64}Cu,\;^{186}W({\gamma}{\cdot}n)\;^{185}W,\;^{181}Ta({\gamma}{\cdot}n)\;^{180}Ta,\;^{199}Au({\gamma}{\cdot}n)\;^{198}Au$.

• The korean journal of orthodontics
• /
• v.28 no.2 s.67
• /
• pp.203-217
• /
• 1998

Sella turcica contains pituitary gland that has influence on craniofacial growth. So, if the volume of sella turcica correlate to the function of Pituitary gland, we can assume that the volume of sella turcica in skeletal Class III patients has some difference to that of normal occlusion group. The purpose of this study was to evaluate the difference of shape and volume of sella turcica between normal occlusion group and Class III patients. The shape of sella turcica was Classified by Inaba method and the volume of sella turcica was measured in lateral and P-A cephalograms by Di Chiro method. To find out the possibility of the volume of sella turcica as diagnostic aid to predict Class III growth pattern, the correlation coefficients between the volume of sella and cephalometric variables were calculated. The results were as follows. 1. The volume of sella turcica in Class III patients is larger than that of normal occlusion groups 2. The volume of sella turcica in female was larger than that of male in Class III patients 3. The volume of sella turcica has close correlation with APDI, ANB, SNA, SNB, ODI, gonial angle, post. cranial base length 4. Sella Index (volume of sella / ant. cranial base length) can be a more accurate indicator that represent Class III growth pattern than volume of sella itself. 5. The morphologic pattern of sella turcica had no significant difference between two groups.

• Journal of Radiation Protection and Research
• /
• v.32 no.1
• /
• pp.35-44
• /
• 2007

Sealed sources have to conducted the tests be done according to the classification requirements for their typical usages in accordance with the relevant domestic notice standard and ISO 2919. After each test, the source shall be examined visually for loss of integrity and pass an appropriate leakage test. Tests to class a sealed source are temperature, external pressure, impact, vibration and puncture test. The environmental test conditions for tests with class numbers are arranged in increasing order of severity. In this study, the apparatus of tests, except the vibration test, were developed and applied to three kinds of sealed source. The conditions of the tests to class a sealed source were stated and the difference between the domestic notice standard and ISO 2919 were considered. And apparatus of the tests were made. Using developed apparatus we conducted the tests for $^{192}Ir$ brachytherapy sealed source and two kinds of sealed source for industrial radiography. $^{192}Ir$ brachytherapy sealed source is classified by temperature class 5, external pressure class 3, impact class 2 and vibration and puncture class 1. Two kinds of sealed source for industrial radiography are classified by temperature class 4, external pressure class 2, impact and puncture class 5 and vibration class 1. After the tests, Liquid nitrogen bubble test and vacuum bubble test were done to evaluate the safety of the sealed sources.

• Korean journal of applied entomology
• /
• v.4
• /
• pp.51-54
• /
• 1965

The study was initiated to investigate the nature of varietal resistance to the rice stem borer (Chilo suppressalis WALKER), specially the rotation of the resistance to the silica and nitrogen content of the host Plants. 1. The body freight of the larvae, reared on the stem of the various varieties of rice plants, when weighed at the age of 25 days old, showed great variation, and ranged from 21.24 mgrs. to 45.77 mgrs. depending on the used varieties of tile rice plants. And generally the varieties of Indica types were showed greater body weight than that of Japonica types in this experiments. 2. The positive correlation coefficients of percent survivals to body weight, developement, oviposition preference and rate of damage to host plants were significant, and consequently the percent survival could be used as a criteria of resistance. 3. The content of silica in the host plants was significantly correlated with both the degree of boring on the leaf and attractovemess of larvae, and the total nitrogen content of plants showed significant positive correlation coefficient with larval attractivenes, but not significant with the degree of boring on the leaf. 4. Since the attractiveness and boring manner were significantyly correlated to resistance criteria of rice plant to the pest, it could be considered that the resistance is the results of chain reaction of the factors mentioned above.

• Journal of Korea Port Economic Association
• /
• v.31 no.1
• /
• pp.37-49
• /
• 2015

According to outstanding maritime economists from domestic and overseas, shipping lines or ships' enlargement reduce fixed costs, and assist realization of scale of economy of shipping. On the contrary, recent Korean liquidity crisis on the shipping lines (SL) has been focused on the leading companies such as Hanjin Shipping (HJS), Korealines, and STX Pan Ocean. In this respect, this study aims to review Korean SLs' strategies and suggest the optimal solution between the specialization and enlargement. For these purposes, this research adopts slack based measure data envelopment analysis (SBM-DEA) model as a research methodology. As for decision making units (DMUs), SLs which have increased the vessel numbers and belonged to top tier group in year 2013, are selected. The results are comprised with two aspects. Firstly, HJS, KMTC, Korea LNG Trading (KLT), EUKOR, and Sinokor Tanker show the most efficient in regard to constant return to scale (CRS) model. Secondly, HJS, KMTC, KLT, Daerim, Chungang, Sinnokor Tanker, and EUKOR are the most efficient companies in terms of variable return to scale (VRS) model. Lastly, these results could be affected to the management philosophy and can answer the following question. Which is the most optimized SL?s management decision making, enlargement or specialization?

• Explosives and Blasting
• /
• v.26 no.2
• /
• pp.11-19
• /
• 2008

The development of an excavation damaged zone, EDZ, due to the blasting impact and stress redistribution after excavation, can influence on the long tenn stability, economy, and safety of the underground excavation. In this study, the size and characteristics of an EDZ around an underground research tunnel, which was excavated by controlled blasting, in KAERI were investigated. The results were implemented into the modelling for evaluating the influence of an EDZ on hydro-mechanical behavior of the tunnel. From in situ tests at KURT, it was possible to determine that the size of EDZ was about l.5rn. Goodman jack tests and laboratory tests showed that the rock properties in the EDZ were changed about 50% compared to the rock properties before blasting. The size and property change in the EDZ were implemented to a hydro-mechanical coupling analysis. In the modeling, rock strengths and elastic modulus were assumed to be decreased 50% and. the hydraulic conductivity was increased 1 order. From the analysis, it was possible to see that the displacement was increased while the stress was decreased because of an EDZ. When an EDZ was considered in the model, the tunnel inflow was increased about 20% compared to the case without an EDZ.

• Journal of the Korean Wood Science and Technology
• /
• v.43 no.6
• /
• pp.701-713
• /
• 2015

A model was designed to identify wood species between Pinus densiflora for. erecta Uyeki and Pinus densiflora Sieb. et Zucc. using the near-infrared (NIR) spectroscopy in combination with principal component analysis (PCA) and partial least square discriminant analysis (PLS-DA). In the PCA using all of the spectra, Pinus densiflora for. erecta Uyeki and Pinus densiflora Sieb. et Zucc. could not be classified. In the PCA using the spectrum that has been measured in sapwood, however, Pinus densiflora for. erecta Uyeki and Pinus densiflora Sieb. et Zucc. could be identified. In particular, it was clearly classified by sapwood in radial section. And more, these two species could be perfectly identified using PLS-DA prediction model. The best performance in species identification was obtained when the second derivative spectra was used; the prediction accuracy was 100%. For prediction model, the $R_p{^2}$ value was 0.86 and the RMSEP was 0.38 in second derivative spectra. It was verified that the model designed by NIR spectroscopy with PLS-DA is suitable for species identification between Pinus densiflora for. erecta Uyeki and Pinus densiflora Sieb. et Zucc.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.4
• /
• pp.417-426
• /
• 2010

This paper describes the 6-way power divider to be used as a feeding structure of the waveguide array antenna generating the plane wave at the near distance. The SMA connector has been connected at the center of the power divider in order to feed the radiating element. The six output ports made of waveguide are positioned on the peripheral of the divider. This paper proposes the method utilizing the inductive post in order to decrease the return loss. The height of the feeding pin, the diameter of the inductive post, and the distance between the feeding pin and inductive post have been investigated, and as a result, the power divider has been optimized. The simulated and measured results show the low return loss of about -40 dB. The calculated and measured transmission coefficients are -7.78 dB and -8.06 dB, respectively. The output power of the six waveguide port show equal-amplitude and equal-phase distribution. Since the power divider proposed in this paper can be expanded to the divider having several output ports, it could be easily applied to the various array antennas.