• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.10a
• /
• pp.852-853
• /
• 2015

본 논문에서는 차량 추돌 방지 레이더용 24GHz 전압제어발진기를 제안한다. 제안한 회로는 TSMC $0.13-{\mu}m$ 고주파 CMOS 공정 ($f_T/f_{MAX}=120/140GHz$)으로 구현되어 있고, 1.5 볼트 전원전압에서 동작한다. 전체 칩 면적과 소비전력을 줄이기 위해 수동형 인덕터 대신 트랜지스터와 전류원으로 구성된 능동형 인덕터부를 사용하였다. 제작된 전압제어발진기는 기존 연구 결과에 비해 동작주파수에서 6.1mW의 낮은 소비전력 특성과 $0.06mm^2$의 매우 작은 칩 면적 특성을 보였다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.20 no.6
• /
• pp.570-579
• /
• 2009

In this paper, we presented a Vt-DRO with a wide electrical frequency tuning range, using open-loop gain method. The Vt-DRO was composed of 3-stages, resonator, amplifier and phase shifter. In order to satisfy an oscillation condition, we determined magnitude and phase of each stage. The measured S-parameter of cascaded 3-stages shows open-loop oscillation condition. Also, using measured open loop group delay, we derived the relation for electrical frequency tuning range. The Vt-DRO was implemented by connecting the input and the output of the designed open-loop and resulted in closed-loop. As a results, tuning-range of Vt-DRO is 82 MHz, which is close to the predicted results for tuning voltage 0${\sim}$10 V and shows linear frequency tuning at the center frequency of 5.3 GHz. The phase noise is -104 ${\pm}$1 dBc/Hz at 100 kHz offset frequency and power is 5.86${\pm}$1 dBm respectively.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.7 no.5
• /
• pp.863-871
• /
• 2003

In this paper, we design a high stable Ku-band phase-locked dielectric resonant microwave oscillator with the gate voltage controls of p-HEMT. By adapting the nonlinear equivalent elements which affects phase noise of microwave oscillator, we optimize the nonlinear elements of p-HEMT to have low phase noise operation. Using the scattering parameters according to bias voltages, we designed the gate voltage control microwave dielectric resonant oscillator and phase-locked loop circuits is applied to have the high stable operations. Designed microwave oscillator as a local oscillator of digital microwave communication shows that output power is 9.17dBm at 10.75GHz and it's phase noise is -88dBc/Hz at 10KHz offset frequency.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.22 no.1
• /
• pp.46-52
• /
• 1985

The modulo PLL was applied to the implementation of frequency synthesis with the narrow channel spacing, many channels and three different frequency bands. So , VCO (voltage controlled oscillator) designed In this paper is suitable for the device with three different frequency bands 10Hz, 40Hz, 400Hz channel spacing, and 512 channels.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.46 no.9
• /
• pp.74-80
• /
• 2009

This paper describes a $2{\sim}6GHz$ CMOS frequency synthesizer that employs only one LC-tank voltage controlled oscillator (VCO). For wide-band operation, optimized LO signal generator is used. The LC-tank VCO oscillating in $6{\sim}8GHz$ provides the required LO frequency by dividing and mixing the VCO output clocks appropriately. The frequency synthesizer is based on a fractional-N phase locked loop (PLL) employing third-order 1-1-1 MASH type sigma-delta modulator. Implemented in a $0.18{\mu}m$ CMOS technology, the frequency synthesizer occupies the area of $0.92mm^2$ with of-chip loop filter and consumes 36mW from a 1.8V supply. The PLL is completed in less than $8{\mu}s$. The phase noise is -110dBC/Hz at 1MHz offset from the carrier.

• Journal of IKEEE
• /
• v.17 no.1
• /
• pp.16-21
• /
• 2013

Recently, frequency synthesizers are being designed in two ways narrow-band loop or dual-loop for wide-band to reduce the phase noise. However, dual-loop has the disadvantage of center frequency mismatch and requiring an extra loop. In this paper, we propose a new structure that supports a range of 800Mhz ~ 3Ghz with multiple control of the single-loop frequency synthesizer without another loop. The control voltage of the VCO(coarse, fine) will be fixed, and finally the VCO will have a low Kvco. The frequency synthesizer is simulated using UMC $0.11{\mu}m$ process, proposed frequency synthesizer can be used in a variety of applications in the future.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2008.11a
• /
• pp.403-404
• /
• 2008

The 2nd stage Kick Motor under the national aerospace middle and long term plan operates over the height of 300Km. Rocket Motors, designed for operation in high altitude, need nozzles with large expansion ratio to improve thrust efficiency. Hence, to evaluate the performance of such rocket motors on the ground, similar low pressure with the operating condition has to be made for the ground test to prevent flow separation in the nozzle. This study is for the installation of the high altitude test facility and test result for Kick Motor.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 1994.04a
• /
• pp.251-257
• /
• 1994

본 연구에서는 생산현장에서 시시각각으로 발생하는 생산정보를 그 발생원 인 기계, 설비, 작업자, 워크 등에서 직접적으로 수집하고, 정보처리하여 실 시간으로 관리측에 제공할 수 있는 POP(Point of Production) 시스템 개발을 목표로 생산정보발생원과 인터페이스되어 실시간적인 정보수집, 처리를 지원 하는 POP 터미널의 기능을 설계하였다. 또한 통합생산시스템을 유연하게 최 적화 운영 할 수 있도록 계획사이드와의 정보통신 등을 제공하는 모듈화된 POP시스템 운영체계의 설계와 Firmware화를 실시하였다.

• Proceedings of the KAIS Fall Conference
• /
• 2001.11a
• /
• pp.196-200
• /
• 2001

Foot has two functions : one is walking (or propulsion), the other is supporting or protecting of human body. In spite of such important roles, the importance of foot in keeping health has been easily disregarded. The bottom of foot is usually regarded as the second heart, for it is the pocket edition of all the principal parts of human body. Shoe is one of the tools to protect foot, and to wear a good shoe is the most demanded point in keeping health, Shoe can be different in kinds and shapes according to each one's usage. That is, different conditions of different people should have the different results in the material, design, last, pattern and structure in manufacturing shoe. A good shoe is absolutely a shoe with its right suitability, elasticity and adaptability. To make this healthy shoe, it is needed to design in the way of human technology, and the relative and scientific materials are basically required in manufacturing it. Recently there is an increasing demand for milti-functional shoe that can improve the efficiency of work in parallel with the maintenance of health. Accordingly this paper put its main purpose on the development of a healthy shoe based on proper and right theory and test.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.49 no.8
• /
• pp.627-636
• /
• 2021

This paper deals with a study for the guidance control of reusable launch vehicle. For this purpose, modeling of the equation of motion of a reusable launch vehicle with 6 degrees of freedom was performed. With this model, an optimal re-entry path was created and a path-following guidance control simulation was performed to follow the optimal re-entry path. For the design of the path-following guidance controller, the attitude controller applying a time-delay technique that is resistant to modeling uncertainty, disturbance and failure. And the nonlinear path-following guidance law were used. Guidance control simulation using a classical PD controller was performed and compared with the guidance control simulation of a reusable launch vehicle applying a time delay technique.