• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.23 no.3
• /
• pp.267-273
• /
• 2013

Recently, turbine-generators have been replaced for the integrity reinforcement and the efficiency improvement, also, the blade's failures of LP turbines due to torsional vibration have been reported. Excessive torsional vibrations can result in failures of components. The severity of torsional oscillations and stress depends upon the separation margin between the excitation frequencies and torsional natural frequencies. Therefore it is needed to measure the torsional natural frequencies after replacement of the components to conform the separation margin of torsional natural frequencies. In this study torsional vibration measurements were performed after LP turbine and generator replacement and the torsional natural frequencies for the turbine-generator train were calculated to evaluate the effects of generator replacement on torsional natural frequencies of turbine-generator train. It is expected that these evaluation results will be used effectively to identify the root causes of torsional vibration problems.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2006.05a
• /
• pp.1029-1033
• /
• 2006

During operation of generator, the excitation force with 120Hz always exist irrespective of No. of poles. Therefore the vibration is generated in the stator end windings and the micro-crack is grown up inside the bars. After all, coolant water is leaked outside the bars or the stator is moved and is worn out. What is more, one bar is touched with another bar so a short circuit may frequently happen in operation. In order to prevent it from occurring, the evaluation of mechanical integrity for generator stator windings is carried out periodically during overhaul period. This help troublesome end windings to complement with insulation material and to change vibration characteristics. In this paper, the evaluation of mechanical integrity for generator stator windings is described and the change of vibration characteristics is analysed.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.24 no.9
• /
• pp.1202-1208
• /
• 2020

In line with the current era of the 4th Industrial Revolution, it is necessary to prepare for the future by integrating AI elements in the ship sector. In addition, it is necessary to respond to this in the field of power management for the appearance of autonomous ships. In this study, we propose a battery-linked electric propulsion system (BLEPS) algorithm using machine learning's DNN. For the experiment, we learned the pattern of ship power consumption for each operation mode based on the ship data through LabView and derived the battery status through Python to check the flexibility of the generator and battery interlocking. As a result of the experiment, the low load operation of the generator was reduced through charging and discharging of the battery, and economic efficiency and reliability were confirmed by reducing the fuel consumption of 1% of LNG.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.6 no.2
• /
• pp.202-208
• /
• 2001

A Switched Reluctance Motor(SRM) has double salient poles structure and the phase windings are wound in stator. SRM hase more simple structure that of other motor, thus manufacture cost is low, mechanically strong, reliable to a poor environment such as high temperature, and maintenance cost is low because of brushless. SRM needs position detector to get rotator position information for phase excitation and tachometer or encoder for constant speed operation. But, this paper doesn\`s use an encoder of high cost for velocity measurement of rotator. Instead of it, the algorithm for position detection and velocity estimation from simple slotted disk has been proposed and developed. To implement variable speed digital control system with velocity estimation algorithm, the TMS320F240-20MIPS fixed point arithmetic processor of TI corporation is used. The experimental results of the developing system are enable to control speed with wide range, not only single pulse, hard chopping mode and soft chopping, ut also variable speed control, and advance angle control.

• Journal of Advanced Marine Engineering and Technology
• /
• v.35 no.6
• /
• pp.786-795
• /
• 2011

This paper described the characteristic of vibration in wind turbine system including gearbox housing, gear drive, blade, generator. Especially, in planetary gear set, planet gears are supported by flexible pin. So, in planet gear, to consider not only torsional movement but also lateral movement. And include housing movement, because wind turbine system is supported by mount. To find out the characteristic of vibration, take the excitation source and study campbell diagram in operating range. Results of campbell diagram, resonances are occurred at 81.2HZ, 104.7Hz by 2nd tooth passing frequency. And resonance are also occurred at 264.5HZ, 377Hz, 424.6Hz by 3th tooth passing frequency. From the result, take vibration reduced measures.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.57 no.6
• /
• pp.966-971
• /
• 2008

Free-piston engine system is a new type energy converter which uses a linear motion of piston by using linear generator. In free-piston engine system, the piston is not connected to a crank-shaft. The major advantages of free-piston engine system are high efficiency and low mechanical loss from the absence of motion conversion devices. Linear generator of free-piston engine system is used as generator and starting motor. In design step, considering of back-emf and detent force characteristics for generating mode and thrust and control characteristics for starting mode is needed. In this research, generating mode of flat-type linear generator and tubular-type linear generator is analyzed by finite element analysis method and starting mode of both type linear generators is analyzed by using capability curve. Capability curve is plotted from electrical parameters of both type linear generator and motion profile is calculated from mechanical parameters.

• Journal of Institute of Control, Robotics and Systems
• /
• v.22 no.5
• /
• pp.315-319
• /
• 2016

This paper proposes a simple adaptive sliding mode control algorithm for controlling a permanent magnet synchronous generator (PMSG) of a MW-class direct-driven wind turbine system. The proposed adaptive sliding mode controller does not require accurate knowledge of the PMSG parameter or turbine torque values. The proposed controller can accurately track the reference angular speed computed by the maximum power point tracking(MPPT) algorithm. Finally, this paper gives Matlab/Simulink simulation results to verify the practicality and effectiveness of the proposed adaptive sliding mode controller.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2006.05a
• /
• pp.99-102
• /
• 2006

본 논문에서는 두 개의 서브 발전 시스템 (풍력과 태양광 발전 시스템)으로 구성된 하이브리드 발전 시스템의 구현을 위한 디지털 퍼지 제어기를 개발한다. 풍력과 광전자 발전기에서 V-I 특성은 비선형 관계를 보여주기 때문에, 비선형 시스템 제어에 많은 장점을 가진 퍼지 모델 기반 제어기를 사용한다. 그리고 마이크로프로세서 기반 제어 시스템 구현하기 위해서 본 과제에서는 디지털 재설계 기법을 통해 디지털 퍼지 제어기를 설계하게 된다. 마지막으로, 하이브리드 발전 시스템에서 최대 전력 추종과 배터리 상태를 일정하게 유지하기 위해서 세 가지 모드 상태에서 제어 목적이 변화하도록 시스템을 구성하게 된다.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.1456-1457
• /
• 2008

본 논문에서는 박막 PZT(Pb(Zr,Ti)O3)를 이용한 d33모드의 자가 발전 소자를 설계 및 제작 하였다. 자가 발전 소자는 진동 에너지를 압전 현상을 통해 전기 에너지로 변환하는 소자로서, 제안한 구조는 단일 외팔보가 아닌 20개 이상의 외팔보를 원형으로 집적한 구조를 갖기 때문에, 기존의 단일 외팔보 위주의 자가발전 소자보다 출력 전력이 우수하다. 자가 발전 소자의 성능 최적화를 위해 유한요소기법(FEM)을 통해 기계적 특성을 분석하였으며, 마이크로 머시닝 기법을 이용하여 초박형의 자가 발전 소자를 제작할 수 있었다. 제작된 자가발전 소자는 $1.2mm\times1.2mm\times0.5mm$ (높이)의 크기를 갖는다.

• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.960-961
• /
• 2015

청정지역으로 규정된 제로에미션 지역을 통과하기 위해서는 배터리를 포함한 전기시스템을 사용하여 외력 특성과 무관하게 안정된 운전성능을 유지해야만 한다. 또한 전기시스템이 항구에서 완충된 상태로 출항이 진행되어서 목표지점에 도착한 경우 뿐만 아니라, 운항 중 발전기 시스템에서 배터리를 충전하고 회항지점에서 항구까지 안정된 전력을 유지해야만 한다. 그러나 운항이 진행되면서 선체에 작용되는 외력을 극복하기 위해 추진력을 급속히 변화하게 된다. 이러한 방법은 제한된 에네지를 사용하는 전기시스템에서 급격한 속도 변화는 에너지 사용량을 증가시키고, 진동, 발진등 추진체에 수명을 단축시키는 단점을 가지고 있다. 본 논문에서는 전기시스템의 전력 변화량을 기반으로 제로에미션을 운항하는 운전방법을 제안한다. 제안된 속도제어방법은 모드별로 선정된 속도변화량을 기준으로 모터의 토크응답성과 전력 변화특성을 PSIM을 사용하여 모의시험하였고, 구동부 하드웨어를 구현하여 성능을 부하 모의시험장치에서 검증하였다.