• Journal of the Korean Society for Precision Engineering
• /
• v.14 no.6
• /
• pp.128-134
• /
• 1997

Holographic interferometry is a useful whole-field nondestructive tesing method for measuring deformations and vibrations of engineering structure. In practical way most holographic interferometer uses a diverging beam, a point light source. When an oject is relatively small, the optical arrangement using a collimated light source has no difficulty technically but for a large object the collimated beam connot be applied anymore practically. In this paper we calculate the error of measured displacement from the sensi- tivity vector dominated by the geometry of optical arrangement for holographic interferometer and show the result with 2-D plots. A plane surface and a cylindrical surface were chosen as objects to be measured and the results from the cases of a diverging and a collimated beams were compared and analyzed.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2009.04a
• /
• pp.41-48
• /
• 2009

Laser diode is used as a crucial part for minimization of terrestrial 3D Laser Scanner. But it has certain limitations such as oval beam shape and inevitable astigmatism. In order to realize a parallel light with beam divergence below 1 mrad, These problems of laser diode can be solved through beam shaping by Pinhole and Aperture. Finally, this study could materialize a collimated beam with 0.3 mrad beam divergence angle and 3mm diameter, that performance and checked by using real manufacture.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2009.06a
• /
• pp.373-374
• /
• 2009

• Proceedings of the Optical Society of Korea Conference
• /
• 2003.07a
• /
• pp.126-127
• /
• 2003

1차원의 레이저빔을 공간내의 전방향으로 퍼트리는 새로운 광학기기인 중공형 원통 프리즘에 대해 보고하고자 한다. 중공형 원통 프리즘은 아래의 그림 1과 같이 속이 빈 유리튜브의 구조를 가진다. 레이저광이 유리관의 표면에 입사되면 반사 및 굴절의 현상이 나타난다. 일반적으로 유리는 굴절률이 공기보다 높아 내부반사가 여러 번 일어나므로 유리관 표면에 입사된 레이저빔은 유리관의 곡면을 따라 진행하면서 반사 또는 굴절의 과정을 반복적으로 거치게 된다. (중략)

• Korean Journal of Optics and Photonics
• /
• v.15 no.2
• /
• pp.158-170
• /
• 2004

Wireless optical communication is expected for high-speed optical communication in the areas of saturated optical fiber communication and low population density. In this paper, we present an optical transmitter system for wireless optical communication with new design concepts different from the usual optical imaging system. The specifications are the following: the source is a laser diode(LD) of wavelength 830 nm in which the divergent angle from the tangential plane differs from that from the sagittal plane. Here, the requested transmission distances are very long range such as 500 m to 1500 m and beam diameter is 3 m at the receiver with symmetrical energy distribution. For the evaluation characteristics of this kind of non-imaging system, two optical quantities, the relative illumination distribution and energy transfer efficiency, are numerically calculated through lots of ray tracing.

• Korean Journal of Optics and Photonics
• /
• v.13 no.3
• /
• pp.204-208
• /
• 2002

We investigate the dependence of indium tin oxide (ITO) thin films on the mixing ratio of Ar:O$_2$ produced by an ion-gun and $O_2$ injected inside the divergence angle of the ion-beam to optimize their sheet resistance and transmittance. The substrate is placed outside the divergence angle, and the films are grown by ion mixing with ITO evaporated at room temperature. From the XRD measurement ITO films are found to be amorphous. ITO thin films show the highest transmittance of 85% at 3$\times$10$^{-5}$ Torr of 0$_2$ and Ae:O$_2$ ratio of 40:60, and the smallest sheet resistance of 132 $\Omega$/$\square$at 1$\times$10$^{-5}$ Torr of $O_2$ and As:O$_2$ ratio of 40:60.

• Journal of the Korean Society of Radiology
• /
• v.6 no.6
• /
• pp.477-481
• /
• 2012

An X-ray diffractometer which has various X-ray optics can give qualitative and quantitative information for a sample using a nondestructive analysis method. A parallel beam optic passes the parallel beam and removes divergent beam generated from an X-ray tube. The parallel beam optic used in the X-ray diffractometer was fabricated by wire cut and grading of stainless steel plates and was evaluated its performance using an X-ray imaging system. The measured parallelization of 6.6 mrad for the fabricated the parallel beam optic was a very close to the expected value of 6 mrad. An X-ray imaging technique for evaluating the parallel beam optics can estimate parallelization for each plate and can be used to other X-ray optics.

• Proceedings of the Optical Society of Korea Conference
• /
• 1991.06a
• /
• pp.9-12
• /
• 1991

방전가열형 구리증기레이저의 비축형 불안정공진기를 사용하여 레이저의 빔발산각을 안정공진기의 경우에 비해 25배 (200 $\mu$rad) 까지 줄였다. 이때 불안정공진기의 배율 M 은 50 이었으며, 평균출력은 안정공진기를 사용할 경우에 비해 53 %를 얻었다. 또한, M이 8.5 일 때 (750 $\mu$rad) 평균출력은 안정공진기의 94% 까지 도달하였다.

• Korean Journal of Optics and Photonics
• /
• v.7 no.3
• /
• pp.244-249
• /
• 1996

Multipass Ti:sapphire amplifier for the light source of DIAL was developed with an angular-multi-plexing, and the characteristics of output energy and spectra were investigated. As the characteristics of two-stage multipass amplifier, the maximum output energy was 22 mJ and the amplification gain was 20 dB on the wavelength of 790 nm. At that condition, output efficiency of the pumping energy was 18 percent. We obtained $0.15cm^{-1}$ (9.4 pm) as a spectral linewidth in the tuning range of 705~845 nm.

• Korean Journal of Optics and Photonics
• /
• v.16 no.2
• /
• pp.152-158
• /
• 2005

We investigated the operational characteristics of a Q-switched Nd:YAG laser, which has an unstable resonator with a GRM(Gaussian reflectivity mirror). With electrical input energy of 55 J, we obtained the fundamental energy of 470 mJ at 1064 nm and the frequency doubled energy of 280 mJ at 532 nm. The Top-Hat profile of the output beam was obtained at the near field, and beam divergence was 1.7 mard.