• Journal of the Korea Society for Simulation
• /
• v.26 no.2
• /
• pp.31-39
• /
• 2017

This paper analyses the effectiveness of Kill Chain (KC) and Korea Air and Missile Defense (KAMD), also known as the K2 systems, using monte carlo simulation. It is assumed that the K2 systems are consisted with unitary KC and multi-layered (upper-tier and lower-tier) KAMD. And each system has two or three arbitrary weapon systems and its combination makes 12 scenarios. Measures of effectiveness (MOE) of the K2 systems were defined as ratio of eliminated ballistic missiles from total threats. And total cost was calculated by number of weapon launched and its unit cost. MOE and total cost of the K2 systems were estimated using monte carlo simulation with a thousand iteration for each scenario. Cost-effectiveness analysis was performed and the best candidate was selected using fixed effectiveness approach. As a result, the performances of KC are prime factor that affects both effectiveness and total cost of the K2 systems. It is also, acquired proper level of lower-tier KAMD to achieve desired defense effectiveness. For future work, it needs to be performed cost-effectiveness analysis based on practical specification and life cycle cost of weapon systems.

• Proceedings of the KSRS Conference
• /
• 2009.03a
• /
• pp.167-171
• /
• 2009

정지궤도에서는 세계 최초의 해양관측위성으로 개발된 정지궤도 해양위성(GOCI, Geostationary Ocean Color Imager)은 통신해양기상위성(COMS, Communication, Ocean and Meterological Satellite)의 탑재체로서 2009년말 발사 예정이다. 정지궤도 해양위성의 복사보정은 센서의 전기적 특성에 의한 잡음을 제거하기 위한 암흑전류 교정(Dark Current Correction)을 먼저 수행한 다음, 주운영지상국인 해양위성센터(KOSC, Korea Ocean Satellite Center)에서 수신된 위성의 원시자료의 Digital Number(DN)를 실제 해양원격탐사에서 이용하는 물리량인 복사휘도(Radiance, $W/m^2/{\mu}m/sr$)로 변환하는 복사보정을 수행한다. 정확도 높은 복사보정을 수행하기 위해서는 기준광원의 복사휘도와 센서의 물리적 특성을 정확하게 알아야 한다. 정지궤도 해양위성 궤도상 복사보정(on-orbit radiometric calibration)에서는 태양이 기준광원이기 때문에, 기준 태양복사모델(Thuillier 2004 Solar Irradiance Model)에서 지구-태양간 거리 변화(1년 주기)를 보정한 태양의 방사도 (Irradiance)를 이용하고, 태양입사각에 대한 태양광 확산기의 감쇄 특성 변화를 고려하여 센서에 입력되는 복사휘도를 계산한다. 센서의 물리적 특성으로 인한 복사보정의 오차를 줄이기 위해 우주방사선 및 우주먼지(space debris)로 인해 위성 운용기간 중 그 특성이 저하되는 태양광 확산기(solar Diffuser)의 특성변화를 모니터링하기 위한 DAMD(Diffuser Aging Monitoring Device)를 이용한다. 정지궤도 해양위성 주관운영기관인 한국해양연구원의 해양위성센터에서는 정지궤도 해양위성 복사보정을 수행하기 위한 S/W를 통신해양기상위성 자료처리시스템 개발사업의 일환으로 개발하였으며, 관련 성능 시험을 수행하고 있다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.6
• /
• pp.698-706
• /
• 2016

Orthogonal frequency division multiplexing (OFDM) has high peak to power ratio (PAPR). High PAPR makes problems such as signal distortion and circuit cost increasing. To solve the problemsm several PAPR reduction methods have been proposed. However, synchronization and orthogonality in OFDM systems may be a limitation to reduce latency for 5G networks. Generalized frequency division multiplexing (GFDM) is one of the possible solutions for asynchronous and non-orthogonal systems, which are more preferable to reduce the latency. However, multiple subsymbols in GFDM result in more superposition in time domain, GFDM has higher PAPR. Selective mapping (SLM) is one of PAPR reduction techniques in OFDM, which uses phase shift. The PAPR of GFDM SLM is compared to conventional GFDM and OFDM SLM in terms of PAPR reduction enhancement via numerical simulations. In addition, the out-of-band performance is analyzed in the aspect of asynchronous condition interference.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.31 no.1
• /
• pp.120-124
• /
• 2003

KAISTSAT- 4, an experimental small satellite, is being developd by Satellite Technology Research Center in KAIST as a sequel mission to KITSAT-1, 2, and 3. The flight model scheduled to be launched in 2003, the qualification model construction and testing have been completed recently. The satellite subsystems of the qualification model have been tested under a thermal vacuum environment harsher than expected in the orbit. Thermal balance test has also been done in order to evaluate and tune the thermal analysis model of the qualification model. This paper describes the thermal vacuum test procedure, the results, as well as the lessons learned during the tests, which can be useful for future thermal vacuum tests of small satellites.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.34 no.2
• /
• pp.17-25
• /
• 2006

In the present study, a 2-D chimera technique for overlapped bodies in relative motion is developed using unstructured triangular meshes. The solid boundary nodes located next to the intersecting point between bodies are merged to the intersecting point to assure accurate representation of the intersecting region. In order to assign proper value of flow variables at the nodes located out of the computational field, interpolation is conducted for non-active nodes. For validation, the motions of a NACA64A006 airfoil and a NACA0012 airfoil with a plane flap are computed and the results are compared with other simulations. The motion of a launching missile ejected from a NACA0012 airfoil is also simulated.

• Korean Journal of Remote Sensing
• /
• v.15 no.3
• /
• pp.209-216
• /
• 1999

KITSAT-3, the third satellite of KITSAT series which has been developed for the last four and half years with purely Korean design and implementation technology, was launched successfully at last. All subsystems were tested and validated during the initial operation of the satellite. During the initaial operation phase, the Earth imaging camera on board KITSAT-3 acquisited several tens of scenes all over the world and transmitted the image data to ground station. The quality of images and the reliability of data transmission-reception system were tested qualititively and quantititively, respectively. In this paper, we summarize the camera, data handling, on-board memory, and image data transmission system of KITSAT-3 as well as the image receiving and archiving system in ground station. The error rate of image data transmission and reception was tested during the initial operation phase. The average data transmission error rate satisfied the initial requirement of less than 1%. The error rate will be reduced through the continuous work of test and stabilization of the ground system hardware.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2004.05a
• /
• pp.1473-1476
• /
• 2004

위성의 개발을 위해서는 오랜 개발기간과 많은 예산, 축적된 기술이 요구된다. 또한 위성에는 다양한 분야의 기술이 사용되어지기 때문에 각 서브시스템마다 독자적인 개발환경을 구축할 필요가 있다. 특히 위성의 제어, 임무수행 및 지상과의 통신 등을 담당하는 탑재소프트웨어는 위성의 용도 및 목적에 따라 개발환경이 크게 달라진다. 실시간 운영체제는 무엇을 사용하는지, 개발 및 검증을 위한 도구로 어떤 프로그램을 사용하는지, 내외부의 인터페이스는 어떠한 방식으로 수행할지, 새로운 기능의 CPU나 하드웨어에 대한 제어 등 위성의 탑재소프트웨어를 개발하기 위해서는 다양한 사항들이 고려되어야 한다. 새로운 위성을 개발할 경우 신기술의 적용과 새로운 위성시스템의 검증 및 개발을 위한 개발검증장비가 요구되며, 위성시스템의 변경 때마다 개발검증장비를 새로이 구축하게 되면 많은 기간과 막대한 비용이 위성개발 시마다 소요된다. 위성선진국에서는 다양한 위성의 개발 시 비용절감 및 개발기간 단축을 위하여 범용위성용 개발검증장비를 개발하여 이용하고 있는 추세이다. 국내에서는 다목적실용위성 1 호가 발사되어 성공적으로 임무를 수행하고 있으며 다목적 실용위성 2 호가 개발되어 현재 통합 및 검증시험이 진행 중이다. 그러나 새로운 위성시스템의 사전검증 및 신기술의 적용을 위한 범용위성 시스템 테스트베드에 대한 기술은 미비한 실정이다. 이러한 범용위성용 개발검증장비의 기반기술을 확보하기 위하여 현재 위성전자전산시스템 개발검증장비에 대한 연구가 수행되고 있다. 본 논문에서는 현재 수행되고 있는 PowerPC를 이용한 위성 탑재소프트웨어 개발검증시스템의 설계 및 개발에 대하여 설명한다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2022.05a
• /
• pp.457-457
• /
• 2022

최근 기후변화로 인한 위기가 인류의 생존을 위협하면서 전 지구적으로 기후변화에 대응하기 위한 탄소 중립 대책을 모색하고 있으며, 지속가능한 신재생에너지에 대해 주목하고 있다. 산업통상자원부는 2034년까지 총 발전량 중 신재생에너지의 비율을 25.8%까지 증가시키는 것을 목표로 신재생에너지의 발전 비율을 증가시키기 위한 다양한 노력을 기울이고 있다. 특히, 신재생에너지 중 가장 많은 비중을 차지하고 있는 태양광 발전은 비교적 광범위한 부지를 필요로 하고 있으며, 환경 및 지형적 영향이 크게 작용하는 만큼 발전 시설 부지 선정 및 운용 계획을 위한 면밀한 분석이 필수적이다. 그러나, 태양광 발전 활용 계획을 수립하기 위해 고려할 수 있는 지상 관측 일사량 및 일조량 데이터는 상당히 제한적이며 관측 밀도가 조밀하지 않다는 한계점이 있다. 본 연구에서는 천리안위성의 후속으로 발사된 천리안2위성의 산출물인 일사량 데이터를 활용하여 한반도 영역에서의 일사량에 대한 시·공간적 분석을 수행하였으며, 이를 기반으로 각 지역적 특성을 파악하고, 토지 피복 유형에 따른 태양광 발전의 효율 정도를 분석·평가하였다. 본 연구의 결과는 계측 지역 및 미계측 지역에서의 시공간적인 태양광 에너지의 효율성에 대한 정보를 제공함에 따라 태양광 발전을 위한 관련 시설물들의 최적 설치 위치 및 규모 등에 대한 설계 기준 마련에 활용될 수 있을 것으로 판단된다.

• Journal of Korea Water Resources Association
• /
• v.53 no.1
• /
• pp.15-27
• /
• 2020

Streamflow discharge as a fundamental riverine quantity plays a crucial role in water resources management, thereby requiring accurate in-situ measurement. Recent advances in instrumentations for the streamflow discharge measurement has complemented or substituted classical devices and methods. Among various potential methods, surface current meter using microwave has increasingly begun to be applied not only for flood but also normal flow discharge measurement, remotely and safely enabling practitioners to measure flow velocity postulating indirect contact. With minimized field preparedness, this method facilitated and eased flood discharge measurement in the difficult in-situ conditions such as extreme flood in active ways emitting 24.125 GHz microwave without relying on natural lights. In South Korea, a rectangular shaped instrument named with Microwave Water Surface Current Meter (MWSCM) has been developed and commercially released around 2010, in which domestic agencies charging on streamflow observation shed lights on this approach regarding it as a potential substitute. Considering this brand-new device highlighted for efficient flow measurement, however, there has been few noticeable efforts in systematic and comprehensive evaluation of its performance in various measurement and riverine conditions that lead to lack in imminent and widely spreading usages in practices. This study attempted to evaluate the MWSCM in terms of instrumen's monitoring configuration particularly regarding tilt and yaw angle. In the middle of pointing the measurement spot in a given cross-section, the observation campaign inevitably poses accuracy issues related with different tilt and yaw angles of the instrument, which can be a conventionally major source of errors for this type of instrument. Focusing on the perspective of instrument configuration, the instrument was tested in a controlled outdoor river channel located in KICT River Experiment Center with a fixed flow condition of around 1 m/s flow speed with steady flow supply, 6 m of channel width, and less than 1 m of shallow flow depth, where the detailed velocity measurements with SonTek micro-ADV was used for validation. As results, less than 15 degree in tilting angle generated much higher deviation, and higher yawing angle proportionally increased coefficient of variance. Yaw angles affected accuracy in terms of measurement area.

• The Korean Journal of Ecology
• /
• v.28 no.4
• /
• pp.215-222
• /
• 2005

MODIS (Moderate Resolution Image Spectrometer) is a core satellite sensor boarded on Terra and Aqua satellite of NASA Earth Observing System since 1999 and 2001, respectively. MODIS LAI, FPAR, and GPP provide useful means to monitor plant phonology and material cycles in terrestrial ecosystems. In this study, LAI, FPAR, and GPP in Korea were evaluated and errors associated with cloud contamination on MODIS pixels were eliminated for years $2001\sim2003$. Three-year means of cloud-corrected annual GPP were 1836, 1369, and 1460g C $m^{-2}y^{-1}$ for evergreen needleleaf forest, deciduous broadleaf forest, and mixed forest, respectively. The cloud-originated errors were 8.5%, 13.1%, and 8.4% for FPAR, LAI, and GPP, respectively. Summertime errors from June to September explained by 78% of the annual accumulative errors in GPP. This study indicates that cloud-originated errors should be mitigated for practical use of MODIS vegetation products to monitor seasonal and annual changes in plant phonology and vegetation production in Korea.