• Korea Information Processing Society Review
• /
• v.11 no.1
• /
• pp.71-76
• /
• 2004

최근 흥행에 성공한 타이타닉, 스타워즈 에피소드II, 매트릭스, 해리포터, 반지의 제왕 등 대부분 헐리우드 영화는 제작 공정의 50% 이상을 CG기술을 활용하여 제작하였다. 그리고, CG 기술을 활용함으로써 제작 경비도 획기적으로 절감할 수 있었다.(중략)

• Communications of the Korean Mathematical Society
• /
• v.15 no.2
• /
• pp.325-330
• /
• 2000

3차원 Euclid 공간의 볼록폐곡면의 평균곡률과 Gauss 곡률의 비가 상수함수와 충분히 가까우면 그 곡면은 중심이 같고 반지름이 거의 같은 두 개의 둥근공 사이에 놓이게 됨을 보였다.

• Journal of Korean Society of Steel Construction
• /
• v.25 no.5
• /
• pp.579-585
• /
• 2013

Shear buckling stresses of steel pipes due to the lateral forces have been analyzed via parametric analysis. Detailed FEM models are prepared, and steel types, thickness, radii and length of steel pipes are selected as parameters. STK400, STK490 and SM570 are used and the thickness of pipe is 2mm and 40mm. The radii(R) and lengths(L) are determined based on the values satisfying the following relationship as R/t=20~400 and L/R=1~3. The shear buckling stresses decrease for all types of considered steels as R/t increase from 20 to 200. High strength steels are more sensitive to R/t, and also have an bigger effect on shear buckling stresses than low strength steels. It is found that shear buckling stresses decrease as L/R increases, showing that the steel pipes become weak as the length of the steel pipe increases.

• Economic and Environmental Geology
• /
• v.37 no.5
• /
• pp.543-554
• /
• 2004

Analysis of multi-channel seismic reflection and well data serves to detail the structural evolution of the northern Okinawa Trough, southern offshore Korea. The overall structural style of the area is characterized by a series of half grabens and tilted fault blocks bounded by basement-involved listric normal faults. Most half grabens and tilted fault blocks developed in the direction of NNE-SSW, parallel to the axis of the Okinawa Trough. Orientation and distribution of the listric faults also suggest the development of transfer faults in NW-SE direction. The rifting phase of the northern Okinawa Trough have been established on the basis of structural and stratigraphic analyses of depositional sequences and their seismic expressions. Major phase of rifting probably started in the Late Miocene and the most active rifting occurred during the Early Pliocene. The rifting produced a series of half grabens and tilted fault blocks bounded by listric normal faults. It appears that the rifting activity has become weaker since the Late Pliocene, but the Pleistocene sediments faulted by listric faults bounding tilted fault blocks suggest that the rifting activity is probably still in progress.

• Parasites, Hosts and Diseases
• /
• v.31 no.1
• /
• pp.7-12
• /
• 1993

Metaceriae of Parvatrema timondavidi (Digenea; Grmnophallidae) were found from Tapes phillippinarum, one of the most common marine clams in Korean. T. were philippinarum was collected from a fishery market in seoul, and all of the clams eximined were found to contain many gymnophyallid metacercariae. To get adult worms, 10 ICR mice were fed with 100 metacercariae each and sacrificed by cervical dislocation at 7, 10 and 14 mice were morphologically characterized by oval body shape, lage oral sucker with lateral located genital pore from the venttral sucker. Based on these characters they identified as P.timondawvidi Bartoli, 1964. this study first confirms the presence of P. timondawcidi metacercartae in T.philippinarum in Korea.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.24 no.3
• /
• pp.448-458
• /
• 2020

Indoor positioning based on trilateration using common chord estimates location of a mobile subject by using intersection points between each circles which the radius is same as distance between the mobile subject and each radio-frequency transmitter. However, if the intersection points are not found due to error of the distance measurement, it causes failure of estimating the mobile subject's location. To prevent this case, numbers which is proportionate to radius of each circles, are temporarily added to each distances in order to lengthen radius of the circles. Although the estimated location includes error due to the radius extension, it is corrected again by the added value and distance from reference point. With introduction of the advanced correction algorithm, potential issues of existing trilateration such as failure of estimating location and distance measurement error will be minimized.

• Journal of the Korean Society of Radiology
• /
• v.14 no.4
• /
• pp.487-494
• /
• 2020

The distance between the source and the detector, the diameter of the detector, and the volume effect of the radiation source result in a change in solid angle at the detector entrance, which affects the determination of detection efficiency by causing a difference in path length within the detector. A typical analysis method for calculating solid angles was useful only for a source (⁶⁰Co) with a simple geometric structure, so in this experiment, the distance between the detector and the source was measured by switching on for up to 25 cm with the reference point of window cap 0.5 cm. In addition, 450 and 1000 ㎖ Marinelli beaker of standard volumetric sources were closely adhered to the detector. For circular point sources co-axial with the detector, the change in the solid angle to the distance from the detector window is equal to half the square radius of the source versus the square radius of the detector, if the resulting relationship of the calculation analysis results in the detector being less than the radius of the source. Since the solid angular difference is 0.5 the result of Monte Carlo is acceptable. The relationship between detector and source distance is shown. Solid angles have been verified to decrease rapidly with distance. Measurement and simulation results for a volumetric source show a difference of ±1.01% from a distance of 0 cm and less than 4 % when the distance is reduced to 5 and 10 cm. It can be seen that the longer distance, the smaller efficiency angle, and the exponential increase in attenuation as the energy decreases, is reflected in the calculation of efficiency. Thus, the detection efficiency has proved sufficient for the use of solid angle and Monte Carlo codes.

• Korean Journal of Applied Biomechanics
• /
• v.19 no.4
• /
• pp.779-791
• /
• 2009

The purpose of this study is to develop a program that computes the position of the instantaneous center of rotation while an object moves in a circular motion. For this study, a mathematical algorithm was developed and implemented on the experimental data. Data for pitching (40m carry) and putting (4m) strokes were obtained from a skilled female golfer. A computer program (Centering 1.0) calculated the experimental data and found the radius of the instantaneous center of rotation. When the data were taken broadly, the program produced an error distance of radius. When the data were divided gradually, the program produced a very close instantaneous center of rotation. On comparing pitching and putting strokes, putting was found to have a greater radius than pitching. The instantaneous centers of rotation of putting were not in the golfer's body rather, they were 3m away from the club head. The Centering 1.0 program can calculate the instantaneous center of rotation with at least three sets of experimental data.

• Journal of the Korean Chemical Society
• /
• v.36 no.6
• /
• pp.791-795
• /
• 1992

The limiting equivalent conductances of LiCl, NaCl, KCl and KBr have been obtained in water using conductometric method from 1 to 2000 bars at $25^{\circ}C$. From the limiting equivalent ionic conductances (obtained using TATB[Tetraphenyl Arsonium Tetraphenyl Borate]method) of $Li^+$, $Na^+$, $K^+$, $Cl^-$, and $Br^-$ ions and viscosity of water at given pressure, their Stokes radii have been calculated. From the corrected radii caliberated by Nightingale method and the crystallographic radii at a given pressure, the volume of hydration-shell surrounding ion was calculated and hydration numbers of $Li^+$, $Na^+$, $K^+$, $Cl^-$, and $Br^-$ ions were obtained. From the experimental results, it was found that the hydration number of $Li^+$, $Na^+$, $K^+$, $Cl^-$, and $Br^-$ ions slightly decreased with increasing pressure. This trend may be explained by Horne's suggestion[Advances in High Pressure Research]. Comparing results of this study with those of Nakahara's, the hydration numbers of $K^+$ and $Cl^-$ ions were almost twice as large as those of Nakahara's[Rev. Phys. Chem. Japan, 42, 12 (1972)]. By comparing the present results with those of Kollman's [J. Am. Chem. Soc., 113, 2481 (1991)], the hydration number obtained by applying TATB method and Nightingale method may be inferred to be reasonable.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.29 no.4
• /
• pp.182-197
• /
• 2011

This research was carried out to investigate the history and development process of the Bansu(泮水) which appeared uniquely at the Chinese 'temple-school(廟學)', Confucian schools as the common and necessary facility through the literature reviews and field surveys. The earliest record about the Bansu was shown in "The Book of Odes(詩經)". Originally Bansu was the water system which flowed near the 'Banpalace(泮宮)', but, in the following time, Bansu has become the symbol of the school which was built by the feudal lords and a very important element in the temple-school landscape. Temple-schools were started at Song(宋) Dynasty and at that time there was no certain form of Bansu, just the natural water course near the structure. Until Ming Dynasty, the "Picture of the Feudal lords' Ban-su" in the book "Samjedohoe(三才圖會)" that compiled by Wang-Xi(王圻), the form of Bansu was appeared to be transformed as the half-round pond. And the half-round pond as called Banji(泮池) of today's form was all rebuilt after Ming Dynasty. The half-moon pond appeared at the private houses, shrines, temples and villages were influenced by the book. From this research we can get the conclusions that Banji seemed one of the sacred one and used in the space arrangement formally for the various functions. This research has found the cultures of half-moon ponds which were used uniquely in China.