• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.14 no.2
• /
• pp.68-74
• /
• 2000

In this paper the concentration, yield and generation quantity of the ozone by the superposition discharge according to the coaxial electrodes geometry is described. In order to improve the ozone generation, a new type of ozonizer is proposed, where a silent discharge and a surface discharge are generated in the separated discharge spaces at the same time. To investigate the ozone generation dependency on electrode geometry, a few discharge tubes with different geometry were fabricated. In our experiment, the 60[Hz] one phase voltage is applied to the discharge tube which has three electrodes. And three kinds of discharges, two silent discharges and a surface discharge are superposed in the same space of the ozonizer. As a result, the followings are obvious. When two kinds of discharges are superposed under the condition using 3 electrode-3gap discharge tube, the maximum ozone efficiency is obtained.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.6C
• /
• pp.403-411
• /
• 2011

This paper addresses a cooperative transmission scheme based on Alamouti coding for cognitive radio networks over frequency selective fading channels. In the proposed scheme, the Alamouti coded form at the destination node is constructed through a simple combination of symbols at the source node, instead of the time-reversal operation and the conjugate operation at the relay nodes used in the conventional scheme. Numerical results show that the proposed scheme achieves a higher order cooperative diversity than that of the conventional scheme.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.16 no.2
• /
• pp.113-122
• /
• 2016

In this paper, we suggest a approach which comprises fast Fourier transform inversion by wavelet noise attenuation. It represents an inverse filtering by adopting a factor into the Wiener filtering, and the optimal factor is chosen to minimize the overall mean squared error. in order to apply the Wiener filter, we have to compute the power spectrum of original image from the corrupted figure. Since the Wiener filtering contains the inverse filtering process, it expands the noise when the blurring filter is not invertible. To remove the large noises, the best is to remove the noise using wavelet threshold. Wavelet noise attenuation steps are consisted of inverse filtering and noise reduction by Wavelet functions. experimental results have not outperformed the other methods over the overall restoration performance.

• Journal of IKEEE
• /
• v.7 no.2 s.13
• /
• pp.156-165
• /
• 2003

This paper describes the design of a robust adaptive fuzzy observer for uncertain nonlinear dynamical system. We propose a new method in which no strictly positive real (SPR) condition is needed. No a priori knowledge of an upper bound on the lumped uncertainty is required. The Lyapunov synthesis approach is used to guarantee a semi-global uniform ultimate boundedness property of the state observation error, as well as of all other signals in the closed-loop system. The theoretical results are illustrated through a simulation example of a mass-spring-damper system.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.8 no.4
• /
• pp.866-872
• /
• 2004

In fingerprint verification and identification, fingerprint and background region should be segmented. For this purpose, most systems obtain variance of brightness of X and Y direction using Sobel mask. To decide given local region is background or not, the variance is compared with a certain threshold. Although this method is simple, most fingerprint image does not separated with two region of fingerprint and background region. In this paper, we presented a new segmentation algorithm based on run-length connectivity analysis. For a given binary image after thresholding, suggested algorithm calculates RL of X and Y direction. Until the given image is segmented to two regions, small run region is successively inverted. Experimental result show that this algorithm effectively separates fingerprint region and background region.

• Journal of Satellite, Information and Communications
• /
• v.7 no.1
• /
• pp.53-58
• /
• 2012

In this paper, we evaluate and analyze representative estimation methods for the sparse channel. In order to evaluate error performance of matching pursuit(MP) and minimum mean square error(MMSE) algorithm, lower bound of MMSE is determined by Cramer-Rao bound and compared with upper bound of MP. Based on analysis of those bounds, mean square error of MP which is effective in the estimation of sparse channel can be larger than that of MMSE according to the number of estimated tap and signal-to-noise ratio. Simulation results show that the performances of both algorithm are reversed on the sparse channel with Rayleigh fading according to signal-to-noise ratio.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.7
• /
• pp.1646-1652
• /
• 2015

In this paper, we propose a depth conversion method for orthoscopic real image reconstruction in integral imaging. Pseudoscopic image has been regarded a problem in conventional integral imaging. the depth of reconstructed image is depending on a coordinate of an elemental image. The conversion from pseudoscopic to orthoscopic may be possible by analysing the geometrical relation between pickup and reconstruction system of elemental image. The feasibility of the proposed method has been confirmed through preliminary experiments as well as ray optical analysis.

• Journal of Convergence for Information Technology
• /
• v.11 no.6
• /
• pp.7-13
• /
• 2021

In this paper, the function of starting the negative voltage used in the IT equipment when it is generated and the method of controlling it using a microcontroller for the function to detect the overload and respond to it are presented. To do this, the limitations of the existing negative voltage generation circuit and the problems that occur during overload were analyzed, and a circuit that detects and controls the overload condition without a separate current sensing circuit was presented. In order to confirm the effect of the proposed method, an experiment was conducted by configuring an experimental circuit. As a result of the experiment, compared to the existing negative voltage generation circuit, which falls into a latch-up state when overloaded and enters a dangerous state, the proposed circuit detects this, stop the operation of the circuit, and informs the user of such an abnormal state to take action. have. In addition, since the starting point of the circuit is determined according to the system state, the experimental result was confirmed that the starting time was significantly shortened by about 23% compared to the time switch method.

• Journal of Convergence for Information Technology
• /
• v.11 no.3
• /
• pp.14-19
• /
• 2021

In this paper, a method of constructing an inverter circuit that can generate negative voltage required to operate an IT device in a stable using an inexpensive buck device is presented. To do this, the problem of constructing the inverter circuit using the existing buck device was examined, the principle that could prevent this problem was analyzed, and a circuit that could solve this problem was presented. In order to prove the effectiveness of the proposed method, the experimental circuit was constructed and the experiment was conducted. Compared to the operation of the inverter circuit by the existing overcurrent prevention circuit, it was confirmed that the stable operation was performed without an overcurrent phenomenon. Accordingly, it is expected that the performance of the circuit can be greatly improved while a number of peripheral devices for configuring the devices for processing various analog signals used in IT devices as a single power supply can be omitted.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.7
• /
• pp.1657-1662
• /
• 2014

In this paper, the impact of substrate bias($V_{BS}$) on the zero capacitor RAM(Z-RAM) in n-channel junctionless multiple gate MOSFET(MuGFET) has been analyzed experimentally. Junctionless transistors with fin width of 50nm and 1 fin exhibits a memory window of 0.34V and a sensing margin of $1.8{\times}10^4$ at $V_{DS}=3.5V$ and $V_{BS}=0V$. As the positive $V_{BS}$ is applied, the memory window and sensing margin were improved due to an increase of impact ionization. When $V_{BS}$ is increased from 0V to 10V, not only the memory window is increased from 0.34V to 0.96V but also sensing margin is increased slightly. The sensitivity of memory window with different $V_{BS}$ in junctionless transistor was larger than that of inversion-mode transistor. A retention time of junctionless transistor is better than that of inversion-mode transistor due to low Gate Induced Drain Leakage(GIDL) current. To evaluate the device reliability of Z-RAM, the shifts in the Set/Reset voltages and current were measured.