• Korean Journal of Food Science and Technology
• /
• v.20 no.2
• /
• pp.272-279
• /
• 1988

Kinetics of ascorbic acid destruction and browning were evaluated by the dynamic test using actual drying data in order to apply in the optimization of food dehydration. Radish was chosen as a test material because it has many typical quality characteristics during drying. Radish was dried in the cabinet dryer with being measured in moisture, food temperature, ascorbic acid and browning. Using moisture and temperature history, proposed kinetic model was integrated and parameters of the model were searched by the iteration scheme to show minimum discrepancy between predicted and experimental data. Ascorbic acid destruction and browning were represented by first and zero order reaction respectively. Arrhenius equation was used to describe temperature dependence. Several mathematical functions of moisture dependence were compared in the model simplicity and residual sum of square. Attained kinetic models were analyzed as functions of temperature and moisture. Rate of ascorbic acid destruction was low at high moisture content, increased with moisture decrease to show a maximum at the moisture of $9{\sim}12g/g$ dry solid, and then decreased up to full dryness. Browning rate increased with moisture decrease to show a sharp maximum at $4{\sim}6g/g$ dry solid and decreased with further moisture decrease.

• Journal of Food Hygiene and Safety
• /
• v.34 no.3
• /
• pp.269-276
• /
• 2019

A colorimetric rapid detection method based on acetylcholinesterase (AChE) was developed for the analysis of organophosphorus (OP) and carbamate (CB) pesticides. The AChE catalyzes acetylthiocholine into thiocholine having (-) and (+) charges, and the (+) charge results in gold nanoparticle (GNP) aggregation. The in-activation of AChE by OP and CB has been well known. In order to optimize the colorimetric method, optimal dilution times of commercial serum containing AChE, diameter of GNP, and concentration of acetylthiocholine were tested as a key parameter. The colorimetric detection limits of the method were 7.5 ng/mL for both dimethyl amine and carbofuran pesticides in 60% ethanol. No cross-reaction to other chemicals, such as aflatoxin B1 and ochratoxin A, which can be contaminated with pesticides in agricultural products, was observed. Recoveries from lettuce, sesame leaf, and cabbage lettuce spiked with known concentrations of dimethyl amine and carbofuran were found to be ranged from 83.85 to 133.16%. These results indicated that the colorimetric rapid method based on AChE can be a useful tool for the sensitive, specific, rapid, and accurate detection of OP and CB pesticides in fresh vegetables.

• Korean Journal of Food Science and Technology
• /
• v.47 no.6
• /
• pp.711-718
• /
• 2015

The optimum conditions for producing vinegar from Jujube (ziziphus jujuba) juice using Acetobacter aceti were exploited by employing the response surface methodology (RSM). In addition to the initial concentration of ethanol, which is known to be a significant factor affecting acetic acid fermentation, the effects of initial concentration of Jujube juice, A. aceti concentration, pH, and temperature on acetic acid fermentation were also investigated. Out of these factors, the effects of the initial concentration of jujube juice and inoculation amount of A. aceti were determined to be negligible based on statistical analysis. By employing the face-centered experimental design in RSM, the optimum conditions for acetic acid fermentation were exploited for achieving maximum acidity and acetic acid production. The coefficients ($R^2$) of the derived equations from the response surface regression were 0.71 and 0.78 for acidity and acetic acid production, respectively. The maximum production of acetic acid was expected to be 52.76 mg/mL from 25% jujube extract at $21.75^{\circ}C$ with 7.69% alcohol content.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.41 no.5
• /
• pp.695-699
• /
• 2012

The objective of this study was to set the optimal extraction condition of flavonoids from onion peels as a by-product generated from the onion industry without suitable processing. Four independent variables, affecting extraction conditions, which are solvent concentration ($X_1$), extraction temperature ($X_2$), pH of the solvent ($X_3$), and solvent ratio to onion peel ($X_4$) were optimized using response surface methodology (RSM). A model equation obtained from RSM is 0.772 of R-square and 0.278 of lack of fit (p>0.05) for the optimal extraction conditions. From the ridge analysis, the conditions flavoring the highest extraction were solvent concentration (v/v) of 70%, extraction temperature of $40^{\circ}C$, extraction solvent pH of 5.3, and a solvent ratio to onion peel ratio of 1:63 (w/v). The flavonoid content obtained under optimal conditions showed 302.63 mg/g, which is 1.12 times higher than the prediction value.

• Food Science and Preservation
• /
• v.15 no.1
• /
• pp.66-73
• /
• 2008

Response surface methodology (RSM) was applied for monitor the yields of desirable substances from fig (Ficus carica L) under different extraction conditions. The maximum yield was 66.46% at 22.08 mL/g of solvent to sample ratio, $90.59^{\circ}C$ extraction temperature and 148.04 min extraction time. The maximum total phenolics was $121.31{\mu}g/mL$ at 17.87 mL/g, $98.82^{\circ}C$, and 130.80 min. The maximum electron donating ability was 54.09% at $121.31{\mu}g/mL$, 18.13 mL/g, and $98.81^{\circ}C$. The maximum value of protease activity was 54.51 unit/min at 17.45 mL/g, $99.01^{\circ}C$, and 131.43 min. In addition, the maximum value of reducing sugar content was 19.14 mg/mL in 22.66 mL/g, $86.30^{\circ}C$, and 153.59 min. The optimum conditions estimated by RSM for maximal extraction of the effective components were $17{\sim}25$ mL/g of solvent to sample ratio, $80{\sim}100^{\circ}C$ of extraction temperature, and $100{\sim}170$ min of extraction time.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2000.02a
• /
• pp.123-123
• /
• 2000

선폭이 초미세화됨에 따라 게이트 전극에서의 공핍 현상 및 불순물 확산의 물제를 갖는 poly-Si 게이트를 대체할 전극 물질로 텅스텐(W)이 많이 연구되어 왔다. 반도체 소자의 배선물질로 일찍부터 사용되어온 텅스텐은 내화성 금속의 일종으로 용융점이 높고, 저항이 낮다. 그러나, 일반적으로 사용되고 있는 CVD에 의한 텅스텐의 증착은 반응가스(WF6)로부터 오는 불소(F)의 게이트 산화막내로의 확산으로 인해 MOS 소자가 크게 열화될수 있다. 본 연구에서는 W/TiN 이중 게이트 전극 구조를 갖는 MOS 캐패시터를 제작하여 전기적 특성을 살펴보았다. P-Type (100) Si위에 RTP를 이용, 85$0^{\circ}C$에서 110 의 열산화막을 성장 및 POA를 수행한 후, 반응성 스퍼터링법에 의해 상온, 6mTorr, N2/Ar=1/6 sccm, 100W 조건에서 TiN 박막을 150, 300, 500 의 3그룹으로 증착하였다. 그 위에 LPCVD 방법으로 35$0^{\circ}C$, 0.7Torr, WF6/SiH4/H2=5/5~10/500sccm 조건에서 2000~3000 의 텅스텐을 증착하였다. Photolithography 공정 및 습식 에칭을 통해 200$\mu\textrm{m}$$\times$200$\mu\textrm{m}$ 크기의 W/TiN 복층 게이트 MOSC를 제작하였다. W/TiN 복측 게이트 소자와 비교분석하기 위해 같은 조건의 산화막을 이용한 알루미늄(Al) 게이트, 텅스텐 게이트 MOSC를 제작하였다. 35$0^{\circ}C$에서 증착된 텅스텐 박막은 10~11$\Omega$/ 의 면저항을 가졌고 미소한 W(110) peak값을 나타내는 것으로 보아 비정질 상태에 가까웠다. TiN 박막의 경우 120~130$\Omega$/ 의 면저항을 가졌고 TiN (200)의 peak 값이 크게 나타난 반면, TiN(111) peak가 미소하게 나타났다. TiN 박막의 두께와 WF/SiH4의 가스비를 변화시켜가며 제작된 MOS 캐패시터를 HF 및 QS C-V, I-V 그리고 FNT를 통한 전자주입 방법을 이용하여 TiN 박막의 불소에 대한 확산 방지막 역할을 살펴 보았다. W/TiN 게이트 MOS 소자는 모두 순수 텅스텐 게이트보다 우수하였고, Al 게이트와 유사한 전기적 특성을 보여주었다. W/TiN 게이트 MOS 소자는 모두 순수 텅스텐 게이트보다 우수하였고, Al 게이트와 유사한 전기적 특성을 보여주었다. TiN 박막이 300 , 500 이고 WF6/SiH4의 가스비가 5:10인 경우 소자 특성이 우수하였으나, 5:5의 경우에는 FNT 전자주입 특성이 열화되기 시작하였다. 그리고, TiN박막의 두께가 150 으로 얇아질 경우에는 WF6/SiH4의 가스비가 5:10인 경우에서도 소자 특성이 열화되기 시작하였다. W/TiN 복층 게이트 MOS 캐패시터를 제작하여 전기적인 특성 분석결과, 순수 텅스텐 게이트 소자의 큰 저전계 누설 전류 특성을 해결할 수 있었으며, 불소확산에 영향을 주는 조건이 WF6/SiH4의 가스비에 크게 의존됨을 알 수 있었다. TiN 박막의 증착 공정이 최적화 될 경우, 0.1$\mu\textrm{m}$이하의 초미세소자용 게이트 전극으로서 텅스텐의 사용이 가능할 것으로 보여진다.

• Economic and Environmental Geology
• /
• v.56 no.5
• /
• pp.515-532
• /
• 2023

Bentonite, predominantly consists of expandable clay minerals, is considered to be the suitable buffering material in high-level radioactive waste disposal repository due to its large swelling property and low permeability. Additionally, the bentonite has large cation exchange capacity and specific surface area, and thus, it effectively retards the transport of leaked radionuclides to surrounding environments. This study aims to review the thermodynamic sorption models for four radionuclides (U, Am, Se, and Eu) and eight bentonites. Then, the thermodynamic sorption models and optimized sorption parameters were precisely analyzed by considering the experimental conditions in previous study. Here, the optimized sorption parameters showed that thermodynamic sorption models were related to experimental conditions such as types and concentrations of radionuclides, ionic strength, major competing cation, temperature, solid-to-liquid ratio, carbonate species, and mineralogical properties of bentonite. These results implied that the thermodynamic sorption models suggested by the optimization at specific experimental conditions had large uncertainty for application to various environmental conditions.

• Korean Journal of Microbiology
• /
• v.40 no.2
• /
• pp.147-153
• /
• 2004

Protein modification by N-acetyl-${\beta}$-D-glucosamine (O-G1cNAc) on the hydroxyl groups of Ser or Thr ubiq-uitously occurs in eukaryotic cells and is involved in many cellular phenomena. The level of O-G1cNAc-mod-ified protein is regulated by OGT and O-GlcNAcase enzymes. We have tried to produce recombinant O-GlcNAcase in E. coli as an effort to establish in vitro screening system for modulators of O-GlcNAcase. The culture conditions for improvement of O-GlcNAcase productivity, were as follows: induction temperature, $30^{\circ}C$; the concentration of L-arabinose, 0.02% and induction time, 5 hr. Under these culture conditions, E. coli cells containing O-GlcNAcase gene had no enzyme activity until up to 3 hr culture. However, O-GlcNAcase activity dramatically increased from 3 to 5 hr culture. It almost maintained the same level after 5 hr culture. Western blot analysis verified the amount of expressed O-GlcNAcase increased with culture time, being con-sistent with activity data. The optimal reaction condition determined in this study was as follows: protein quan-tity, $5{\mu}g$; reaction time, 30 min; reaction temperature, $45^{\circ}C$; substrate concentration, 2 mM; reaction pH, 6.5. Methanol had little effect on O-GlcNAcase activity and 90% of activity were retained at 10%. Only 15% resid-ual activity were detected at 5% of chloroform.

• Applied Chemistry for Engineering
• /
• v.31 no.4
• /
• pp.377-382
• /
• 2020

A sequential design of experiments was employed to optimize MOF-235 synthesis for acetylene adsorption process. Two experimental designs were applied: a two-level factorial design for screening and a central composite design, one of response surface methodologies (RSM). In this study, 2³ factorial design of experiment was used to evaluate the effect of parameters of synthesis temperature and time, and also mixing speed on crystallinity of MOF-235. Experiments were conducted 16 times follwing MINITAB 19 design software for MOF-235 synthesis. Half-normal, pareto, residual, main and interaction effects were drawn based on the XRD results. The analysis of variance (ANOVA) of test results depicts that the synthesis temperature and time have significant effects on the crystallinity of MOF-235 (response variable). After screening, a central composite design was performed to optimize the acetylene adsorption capacity of MOF-235 based on synthesis conditions. From nine runs designed by MINITAB 19, the result was calculated using the second order model equation. It was estimated that the maximum adsorption capacity (18.7 mmol/g) was observed for MOF-235 synthesized at optimum conditions of 86.3 ℃ and 28.7 h.

• KSBB Journal
• /
• v.21 no.2
• /
• pp.96-102
• /
• 2006

Recently, it has been known that Hericium erinaceum is a one of the very useful functional materials with great attention in mushroom processing industry. In present study, a liquid culture which was not studied systematically until now, was conducted as a method of cultivation for H. erinaceum, and also examined the characteristics of the liquid culture and conditions of process optimization. A good basal medium was selected through the cultivation of 16 species mushroom media and the optimum condition for medium and cultivation were chosen by response surface method. From these results, the optimum condition of medium for mushroom was 3% glucose, 0.2% yeast extract/peptone(1:1) and 0.1% $KH_2PO_4/MgSO_4$(1:1) and also the optimal culture condition was obtained at inoculum of 13.42%, temperature of $22.3^{\circ}C$ and pH of 5.7. The mycelial dry weight of 9 g/I was obtained under these conditions and this amount was about 1.7 times higher than that which were cultivated in basal medium for 8 days.