• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 1998.04a
• /
• pp.17-17
• /
• 1998

연소반응을 가지는 후류(wake)는 가스터빈 연소실의 flame holder 등에서 발생한다. 후류유동의 안정성 혹은 불안정성은 이러한 유동에 있어서 많은 영향을 끼치므로 상당히 중요하다. 본 연구는 위와 같이 연소 반응에 의한 밀도구배를 가지는 후류유동에 대하여 불안정성 해석을 수행하였다. 교란에 대한 지배방정식은 Navier-Stokes 방정식에서 점성항을 제외한 Euler 방정식을 고려하였다. 충류유동의 압력은 일정하다고 가정하였다. 교란 방정식을 유도하기 위하여 충류 유동이 평행하여 유동 방향에 수직한 방향의 구배만이 존재한다고 가정하였다. 모든 변수들은 충류 유동의 값과 움직이는 파장의 형태를 가지는 작은 교란의 합으로 생각하여 압력에 대한 교란방정식을 구하며, shooting법과 Newton-Raphson법에 근거를 두는 반복법을 사용하여 풀었다. 불안정성 해석을 수행하는 기본 유동의 속도장 및 온도장은 불안정성 해석을 수행하는 기본 유동의 속도장 및 온도장은 비압축성의 경우 우선 Gaussian Profile 가정함과 동시에 연소반응을 포함하는 유동장을 보다 정확히 구하기 위하여 Navier-Stokes 방정식으로부터 구한 결과를 사용하였다. 연소반응을 포함하는 유동장을 구할 때에는 해석상 편의를 위해 예혼합물질은 이상기체로, 화학반응은 1단계의 비가역반응으로 가정하였으며, 반응열로 인한 부력의 효과는 무시하였다. 위와 같은 유동장을 가지고 불안정성 해석을 수행한 결과 후류유동은 두 개의 변곡점을 가지며 sinuous 모드와 varicose모드의 두 개의 불안정성 모드가 있음을 보였다. 밀도 변화가 있는 경우나 밀도 변화가 없는 경우 모두 sinuous 모드의 가장 불안정한 모드가 varicose 모드의 가장 불안정한 모드보다 더 불안정함을 보여주어 후류 유동은 자유 유동에 가까운 위상 속도를 가지는 sinuous 모드에 의해 지배될 것임을 예측할 수 있다. 연소반응이 완전연소에 가까울수록 그리고 압축성 효과가 클수록 유동내부의 온도가 증가하고 점성 또한 증가하여 후류유동은 안정됨을 알 수 있었다 유동변수들의 contour로부터 유동의 특성을 예측한 결과 baroclinic 항이 dilatational 항보다 상대적으로 크며, 중심선 상하에 생기는 vortex를 더욱 성장시킬 것으로 생각된다.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.6 no.1
• /
• pp.12-20
• /
• 2002

An integrated analysis of kerosine/LOX based KSR-III rocket body/plume flowfield has been performed. The analysis has been executed employing three kind of gas thermo-chemical models including calorically perfect gas, multiple species chemically reacting gas, and chemically frozen gas models and their effect on rocket flowfield has been accessed to provide the most appropriate gas thermo-chemical model which meets a specific purpose of performing rocket body and plume analysis. The finite-rate chemically reacting flow solution exhibited higher temperature throughout the flowfield than other gas models due to the increased combustion gas temperature caused by the chemical reactions within the nozzle. All the reactions were dominated only in the shear layer and behind the barrel shock reflection region where the gas temperature is high and the effect of finite-rate chemical reactions on the flowfield was found to be minor. However, the present plume computation including finite-rate chemical reactions revealed major reactions occurring in the plume and their reaction mechanisms and as well.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.2 no.2
• /
• pp.30-37
• /
• 1998

This paper investigates the linear stability of wakes with special emphasis on the effect of chemical reaction. Velocity and density profiles for laminar flows are obtained from analytic profiles as well as from simulation. Wakes have two generalized inflection points and two unstable modes-sinuous and varicose modes. For analytical laminar profiles, sinuous modes are more unstable than varicose modes irrespective of density variation, which shows wakes will be destabilized by sinuous modes. Large velocity difference and density difference lead to more unstable wakes due to large momentum difference. For simulated laminar profiles, chemical reaction with stoichiometric chemistry increases temperature and stabilizes the flow due to increase in compressible reacting wades, flow becomes stable as velocity increases due to viscous dissipation.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.30 no.1
• /
• pp.114-123
• /
• 2002

A supersonic rocket plum flowfield of kerosene/liquid-oxygen based propulsion system has been analysed using the Reynolds-averaged Navier-Stokes equations coupled with a 9-species 14-reaction finite-chemistry model. The result were compared with chemically frozen flow solution to investigate the effect of finite-rate chemistry on the plume flowfield. The computations were performed using a commercial CFD software, FLUENT 5. The finite-rate chemistry solution exhibited higher temperature caused by the reactions within the nozzle. All the chemical reactions within the plum were dominated only in the shear layer and behind the barrel shock reflection region where the temperatures are high and the effect of finite-rate chemical reactions on the flowfield was found to be insignificant. However, the present plume computation including the finite-rate chemical reaction within the plume has revealed major reactions occurring in the plum and their reaction mechanisms.

• Fire Science and Engineering
• /
• v.27 no.6
• /
• pp.64-69
• /
• 2013

The Numerical simulation was performed on the flow field around the two-dimensional rectangular bluff body in order to simulate an engine nacelle fire and to complement the previous experimental results of the bluff body stabilized flames. Fire Dynamic Simulator (FDS) based on the Direct Numerical Simulation (DNS) was employed to clarify the characteristics of reacting flow around bluff body. The overall reaction was considered and the constant for reaction was determined from flame extinction limits of experimental results. The air used atmosphere and the fuel used methane. For both fuel ejection configurations against an oxidizer stream, the flame stability and flame mode were affected mainly by vortex structure near bluff body. In the coflow configuration, air velocity at the flame extinction limit are increased with fuel velocity, which is comparable to the experiment results. Comparing with the isothermal flow field, the reacting flow produces a weak and small recirculation zone, which is result in the reductions of density and momentum due to temperature increase by reaction in the wake zone.

• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 1996.04a
• /
• pp.44-48
• /
• 1996

본 연구는 석탄가스화복합발전(IGCC) 시스템중 핵심 단위 장치중의 하나인 가스화기 내부에서 일어나는 석탄의 가스화 반응 연구를 PCGC-2 프로그램을 통해 수행하였으며 일차적인 목표로 반응장에서의 선회 강도에 따른 가스화기내 유동 및 반응 특성을 파악하고자 하였다.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2005.11a
• /
• pp.450-454
• /
• 2005

A numerical analysis is performed to analyze the reacting flow-field of an axisymetric coaxial ramjet combustor. Two dimensional Navier-Stokes equation with low Reynolds number $k-\varepsilon$ turbulence model is utilized and finite-rate chemistry model is adopted. Eddy dissipation model is applied for a modeling of turbulent combustion. Two different types of combustors (combustor with a suddenly expanded dump and combustor with wedge-shaped flame holders) are compared in a view point of flame stabilizing.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2010.05a
• /
• pp.300-303
• /
• 2010

This work shows the result of numerical simulation on a reacting flow by varying atomization properties which can be obtained from a injector for a small and low power aircraft gas turbine engine. Because the atomization properties mainly affect on the performance of the engine, a lot of efficiency tests are needed when a new injector is developed. Nowadays researches has been actively performed using computational analysis. Using commercial package CFD-ACE+, basic studies on the reacting flow field have been conducted. Those results show that the reaction rate is increased when higher pressure and wider angle spray condition are used. More smaller parcels can also enhance the fuel-air reaction.

• Journal of Energy Engineering
• /
• v.6 no.2
• /
• pp.137-144
• /
• 1997

Turbulent swirling cold-flow in a cyclonic gasifier has been analyzed by numerical analysis. Comparison of two dimensional and three dimensional analyses has shown that concept of equivalent slit is appropriate for the two dimensionalization of three dimensional phenomena. Flow characteristics have been scrutinized by varying swirl number which is a crucial parameter in determining the flow pattern of the cyclonic gasifier. Reactive flow field has been estimated by using theoretical swirl number and equivalent slit width for reactive flow. Results show that proper flow field for the reactive coal gasification can be formed by controlling the exit area and azimuthal location of coal burners.

• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 1996.04a
• /
• pp.32-39
• /
• 1996

사이클론형 석탄가스화기내의 2차원 및 3차원 난류 선회유동장을 수치해석 기법을 이용하여 해석하였다. 2차원 해석을 통하여 선회수의 크기에 따른 유동장의 특성을 고찰하였으며, 3차원 유동장 해석결과와의 비교를 통하여 2차원화의 가정에 적절한 개념을 도출하였다. 입구의 크기 및 위치를 적절히 조절하여 반응기 내부에 적절한 유동장을 형성시킬 수 있음을 발견하였다.