• The Journal of the Korea Contents Association
• /
• v.9 no.10
• /
• pp.444-450
• /
• 2009

We have investigated biosorption kinetics and equilibrium of $Pb^2+$ and $Cr^2+$ using waste sludge, and separation efficiency of waste sludge by dissolved air flotation was evaluated in the various A/S ratio. The biosorption capacity and contact time were shown as a simulation of biosorption equilibrium and kinetics models. Biosorption equilibrium of the $Pb^2+$ and $Cr^2+$ onto the waste sludge could be fitted by the Langmuir, Freundlich, Redlich-Peterson, and Koble-Corrigan equation. The kinetics could be fitted by a pseudo-second-order rate equation more than a pseudo-first-order rate equation. The separation efficiency of waste sludge using DAF was kept above 90%.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.15 no.6
• /
• pp.682-687
• /
• 2005

Behavioral sequences of the medaka(Oryzias latipes) were investigated through an image system in response to medaka treated with the insecticide and medaka not treated with the insecticide, diazinon(0.1 mg/1). After much observation, behavioral patterns could be divided into 4 patterns: active smooth, active shaking, inactive smooth, and inactive shaking. These patterns were analyzed by 5 features: speed ratio, x and y axes projection, FFT to angle transition, fractal dimension, and center of mass. Each pattern was classified using decision tree. It provide a natural way to incorporate prior knowledge from human experts in fish behavior, The main focus of this study was to determine whether the decision tree could be useful in interpreting and classifying behavior patterns of the animal.

• Journal of the Korean Geotechnical Society
• /
• v.33 no.9
• /
• pp.61-69
• /
• 2017

This study presents the experimental results of $CaCO_3$ formation in sand by the Enzyme Induced Carbonate Precipitation (EICP) method. Concentration of $CaCO_3$ with elapsed reaction time is calibrated by standardized procedure by measuring $CO_2$ pressure, and it increases with time towards asymptotic value. Jumunjin sand saturated with EICP solution shows that both shear wave velocity and electrical conductivity sharply increase as the reaction starts to approach to the constant values after 50 hours of reaction time. Urease concentration of 0.5 g/L exhibits 224% higher final shear wave velocity than that of 0.1 g/L. The nucleation models hint that carbonate tends to precipitate not only at grain contacts but also at grain surfaces. Regardless of urease concentration, electrical conductivity and shear wave velocity follow the unique path. The scanning electron microscopic images and X-ray computed tomographic images validate the spatial configuration of produced $CaCO_3$ in soils.

• Korean Chemical Engineering Research
• /
• v.57 no.2
• /
• pp.219-224
• /
• 2019

In this study, the adsorption characteristics of cephalomannine on commercial adsorbent Sylopute were investigated using different parameters such as adsorption temperature, time, and initial cephalomannine concentration for the efficient separation of Taxus chinensis-derived cephalomannine by adsorption process. The Temkin isotherm model showed good fit to the equilibrium adsorption data. The adsorption capacity decreased with increasing temperature and the adsorption of cephalomannine onto Sylopute was physical in nature. Adsorption kinetic data fitted well with pseudo-second-order kinetic mode. According to the intraparticle diffusion model, film diffusion and intraparticle diffusion did not play a key role in the entire adsorption process. The process of cephalomannine adsorption onto Sylopute was exothermic and spontaneous. In addition, the isosteric heat of adsorption was constant even with variation in surface loading indicating homogeneous surface coverage.

• Journal of Korea Soil Environment Society
• /
• v.5 no.2
• /
• pp.3-12
• /
• 2000

This study was carried out to evaluate the effect of aeration on removal of phenolic compounds in soils. Phenol, 2,4-dichlorophenol, and pentachlorophenol as phenolic compounds were chosen in this study. Texture of soil used was sandy loam. Temperature and moisture content of the soils in lab-scale reactors were maintained at $25^{\circ}C$ and at 15%, respectively. Phenolic compounds vaporized from reactors were trapped by methylene chloride solution. Phenolic compounds were applied to the soils as individual compound Aeration improved the phenol degradation rate in soil, while it did not in case of 2,4-dichlorophenol and pentachlorophenol. The amount of phenol vaporized by aeration was only 0.3of of that of initial phenol compound added to the soil. First order kinetics described the degradation rates of phenolic compounds better than zero order kinetics.

• Applied Chemistry for Engineering
• /
• v.2 no.1
• /
• pp.30-37
• /
• 1991

The production of hydrogen from steam by reduced iron with additives such as CuO, $In_2O_3$, $MoO_3$ and $WO_3$ has been kinetically investigated. It was shown that all additives have a promoting effect on reaction activity in the order of $$MoO_3{\gg}In_2O_3{\sim_=}WO_3{\sim_=}CuO$$. The shrinking core model was applied to predict the complete conversion time and the results were quite comparable with experimental values. The reaction was carried out in a fixed flow reactor packed with reduced iron with 1 wt % of additives under the conditions, $600-750^{\circ}C$, Ar flow rate of 1 L/min and steam partial pressure of 0.085 atm. The apparent activation energies were 14.2, 20.9, 21.3, 22.4 and 27.9 kJ/mol with $MoO_3$, $In_2O_3$, $WO_3$, CuO and without additive, respectively.

• Polymer(Korea)
• /
• v.30 no.1
• /
• pp.45-49
• /
• 2006

In this study, it was investigated on the boron separation ken synthetically prepared seawater. ion exchange resin used in the experiments was Amberlite IRA 743, containing glucamine functional group. The experiments were carried out as a function of the conditions of the pH, boron initial concentration and temperature of seawater in a batch reactor. As a result, optimum conditions for boron adsorption were at pH 8.5 and 313 K, respectively. The adsorption rate was increased very fast with increasing the temperature, but decreased with increasing the initial concentration of boron. Also, the kinetics for boron adsorption applied the pseudo-second order model, as follows: $$\frac{X}{1-X}=780[C_0]^{-1.65}t^{1.48}\;exp\;({-\frac{17883}{RT}}\)\;;\;pH8.5$$

• Korean Chemical Engineering Research
• /
• v.52 no.3
• /
• pp.395-401
• /
• 2014

In this work, the reaction characteristics for the non-catalytic esterification of palm fatty acid distillate were analyzed. The esterification reaction was assumed as the pseudo homogeneous $2^{nd}$ order reversible reaction and 'reaction effectiveness factor (${\eta}$)' was used to take accounts into evaporation and reaction of water and methanol, which take place simultaneously in the liquid phase. The nonlinear programming was used to derive appropriate kinetic parameters, the reaction rate constant and mass transfer coefficient, minimizing the error between experimental data and the numerical values. Based on these parameters, the apparent activation energy was calculated to be 43.98 kJ/mol.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.34 no.12
• /
• pp.48-58
• /
• 2006

The spray and combustion characteristics of liquid jet in cross flow with variation of injection angle are numerically studied. Numerical analysis was carried out using KIVA code, which may be used to generate numerical solutions to spray and chemical reactive fluid problem in three space dimensions and modified to be suitable for simulating liquid jet ejected into the cross flow. Wave model and Kelvin- Helmholtz(KH) /Rayleigh-Taylor(RT) hybrid model were used for the purpose of analyzing liquid column, ligament, and the breakup of droplet. Penetration length increases as flow velocity decreases and injection velocity increases. Numerical error increases as inflow velocity increases. The results of flame propagation contour in combustion chamber and local temperature distribution, combustion emissions were obtained.

• Applied Chemistry for Engineering
• /
• v.28 no.6
• /
• pp.663-669
• /
• 2017

Activated carbons were prepared from waste citrus peels using KOH, NaOH, and $ZnCl_2$ as activating chemicals. They were prepared at optimal conditions including the chemical ratio of 300%, activation time of 1.5h, and activation temperature of $900^{\circ}C$ for KOH, $700^{\circ}C$ for NaOH, and $600^{\circ}C$ for $ZnCl_2$, which were named as ACK, ACN, and ACZ, respectively. Using the activated carbons, their adsorption characteristics for three target gases such as acetone, benzene, and methylmercaptan (MM) were carried out in a batch reactor. The adsorption behavior of activated carbons for three target gases followed the Freundlich model better than the Langmuir. And the experimental kinetic data followed a pseudo-second-order kinetic model more than pseudo-first-order one. Following the intraparticle diffusion model suggested that the external mass transfer and particle diffusion were occurred simultaneously during the adsorption process.