• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.5 no.4
• /
• pp.309-322
• /
• 2007

This study deals with the irradiation effects on some selected components which are being used in an Advanced Spent Fuel Conditioning Process (ACP). Irradiation test components have a higher priority from the aspect of their reliability because their degradation or failure is able to critically affect the performance of an ACP equipment. Components that we chose for the irradiation tests were the AC servo motor, potentiometer, thermocouples, accelerometer and CCD camera. ACP facility has a number of AC servo motors to move the joints of a manipulator and to operate process equipment. Potentiometers are used for a measurement of several joint angles in a manipulator. Thermocouples are used for a temperature measurement in an electrolytic reduction reactor, a vol-oxidation reactor and a molten salt transfer line. An accelerometer is installed in a slitting machine to forecast an incipient failure during a slitting process. A small CCD camera is used for an in-situ vision monitoring between ACP campaigns. We made use of a gamma-irradiation facility with cobalt-60 source for an irradiation test on the above components because gamma rays from among various radioactive rays are the most significant for electric, electronic and robotic components. Irradiation tests were carried out for enough long time for total doses to be over expected threshold values. Other components except the CCD camera showed a very high radiation hardening characteristic. Characteristic changes at different total doses were investigated and threshold values to warrant at least their performance without a deterioration were evaluated as a result of the irradiation tests.

• Journal of Energy Engineering
• /
• v.19 no.2
• /
• pp.136-142
• /
• 2010

Combustion reactivity and thermal behavior of two imported coals used as a pulverized fuel of commercially thermal power plant were investigated by thermogravimetric analysis (TGA) and large scale test furnace of 200 kg/hr. TGA results showed that combustion efficiency of high moisture coal has lower than reference coal due to the slow combustion completion rate although it has the low ignition temperature, and activation energies of high moisture coal with 79 kJ/mol for overall combustion was higher than reference coal of 53 kJ/mol. Test furnace results ascertained that flame of black band of high moisture coal during the combustion in boiler broke out compared to reference coal and then it becomes to unburned carbon due to the less reactivity and combustion rate. But, Blending combustion of high moisture coal with design coal of high sulfur are available because sulfur content of high moisture coal was too low to generate the low SOx content in flue gas from boiler during the combustion. The ash analysis results show that it was not expected to be associated with slagging and fouling in pulverized coal fired systems due to the low alkali metal content of $Na_2O$ and $K_2O$ compared to bituminous coal.

• Applied Chemistry for Engineering
• /
• v.9 no.7
• /
• pp.1030-1035
• /
• 1998

The porous alumina membrane was prepared from aluminum metal(99.8%) by anodic oxidation using DC power supply of constant current mode in an aqueous solution of sulfuric acid. To prevent the chemical dissolution of alumina membrane, $Al_2(SO_4)_3$, $AlPO_4$ and $Al(NO_3)_3$ which could be considered to supply $Al^{3+}$ ions were added to electrolyte solution at a reaction temperature of $20^{\circ}C$ and cumulative charge of $150C/cm^2$. Effects of these additives on the formation of porous alumina membrane were evaluated under various electrolyte concentration(5~20 wt%) and current densities($10{\sim}50mA/cm^2$). The membrane surfaces which were prepared in electrolyte solution with all the additives except $Al_2(SO_4)_3$ were damaged. However, when $Al_2(SO_4)_3$ was added to the $H_2SO_4$ solution, an uniform surface of porous alumina was obtained. Also, it was shown that the pore size of membrane was nearly independent on the quantity of $Al_2(SO_4)_3$ added at same electrolyte concentration and current density.

• Applied Biological Chemistry
• /
• v.12
• /
• pp.25-31
• /
• 1969

The characteristics of crude enzyme produced from Trichoderma viride($O_2-1$) which isolated from half spoiled Locust acacia wood (Robinia Pseudacacia Linne) were examined in this paper. The results obtained were summarized as follows: 1) As a results of enzymatic action on several cellulose substrate it was found that there were some sorts of cellulase in crude enzyme. 2) The activity of C.M.C. ase and ${\beta}-glucosidase$ were decreased in accordance with increasing concentration of substrate, and filter paper saccharifying enzyme relatively increased in accordance with increasing concentration of substrate and enzyme in couse of time. 3) The optimal pH of each enzyme was 5.0 and the range of stability on pH generally from 3 to 6. 4) In disintegrating activity on filter paper, in decomposing activity on C.M.C. and $p-nitrophenyl-{\beta}-D-glucoside$, and in saccharifying activity on filter paper, the optimal temperatures were $50^{\circ}C.,\;60^{\circ}C,\;and\;65^{\circ}C$. 5) The order of stability on temperature was as follow; saccharifying activity on filter paper decomposing activity on C.M.C. disintegrating activity on filter paper>decomposing activity on $p-nitrophenyl-{\beta}-D-glucoside$. 6) The activity of the enzymes was inhibited with mercuric and silver ion, and activated with potassium.

• Journal of Life Science
• /
• v.16 no.4
• /
• pp.605-611
• /
• 2006

To investigate the possible use of probiont in fish farming industry, a bacterium with inhibitory effect against Vibrio anguillarum was isolated from gastrointestinal tract of the marine fish of yellow tail. It was identified to be Bacillus amyloliquefaciens H41 based on biochemical and physiological characterization. The optimal growth conditions of the isolated strain were 1% peptone, 1.5% yeast extract, 1% sucrose, 0.5% NaCl, 0.05% $MgSO_4{\cdot}7H_20$, pH 7.0-8.0, and 20 hr of incubation between $28-35^{\circ}C$ under aeration. The culture supernatant of the isolated strain showed inhibition activity against V. anguillarum. Inhibition activity was cleared by forming a clear zone by a paper-disk method. The maximal production of growth inhibition factor was induced by cultivation under 1% peptone, 1.5% yeast extract, 1% sucrose, 1% NaCl, 0.05% $MgSO_4{\cdot}7H_20$, pH 7.5 and at $35^{\circ}C$. The highest growth inhibition factor production was observed after 16-24 hr cultivation under aeration. The culture supernatant of the isolated strain showed inhibition activity whereas no inhibition activity was shown from the standard B. amyloliquefaciens KCTC 1724 strain. The growth inhibition affected only against V. anguillarum among other pathogenic Vibrios tested here.

• Resources Recycling
• /
• v.27 no.4
• /
• pp.29-35
• /
• 2018

In this study, the electrochemical redox behavior of neodymium in non-aqueous electrolytes was investigated to confirm the possibility of neodymium metallurgy at room temperature. The non-aqueous electrolytes include ionic liquids such as $[C_4mim]PF_6$, $[C_4mim]Cl$, and $[P_{66614}]PF_6$, ethanol which are highly soluble in neodymium salts, and mixed electrolytes based on carbonate with highly electrochemical stability. The electrochemical redox properties of neodymium were better than those of other electrolytes in the case of the mixed electrolyte based on ethylene carbonate (EC)/di-ethylene carbonate (DEC). Ethanol was added to improve the physical properties of the mixed electrolyte. Thorough the analysis about ionic conductivity of EC/DEC ratio, ethanol content and $NdCl_3$ concentration, the best electrolyte composition was 50 vol% content of ethanol and 0.5 M of $NdCl_3$. Using cyclic voltametry and linear sweep voltametry, a current peak estimated at -3.8 V (vs. Pt-QRE) was observed as a limiting current of neodymium reduction. Potentiostatic electrolysis for 18 hours at room temperature at -6 V (vs. Pt-QRE) confirmed that metallic neodymium was electrodeposited.

• Korean Journal of Soil Science and Fertilizer
• /
• v.32 no.4
• /
• pp.375-382
• /
• 1999

In order to investigate the contamination characteristics of the heavy metals in the mine tailings of abandoned gold mine and its surrounding agricultural soils, a sequential extraction procedure of increasing reactivity in the dissolution processes of the heavy metals(Cd, Cu, and Pb) which were associated with solid and/or solution phase in soils was attempted to partition into six particulate fractions : exchangeable, bound to carbonate, bound to Fe-Mn oxides, bound to organic matter, residual, and soluble. Among indigenous heavy metals in the mine tailings, Pb was the most abundant and Cu and Cd were followed by. Fractionation result of Pb obtained from the triplicate samples of the mine tailings were in the order of Fe-Mn oxide> Carbonate> Residual> Organic> Exchangeable> Soluble, while Wolgok series were Exchangeable > Fe-Mn oxide > Carbonate> Organic> Residual> Soluable. However the other heavy metals studied were not followed this trend. The fractionation results of mine tailing and agricultural soils demonstrated that different geochemical fractions were operationally defined by an extraction sequence that generally followed the order of decreasing solubility. Therefore potential mobility and bioavailability of heavy metals as toxic pollution sources can be evaluated when studying the pollution levels of heavy metals in soils.

• Korean Journal of Environmental Agriculture
• /
• v.33 no.1
• /
• pp.44-51
• /
• 2014

BACKGROUND: Water quality of rural areas are susceptible to agricultural nutrient input and supply such as chemical fertilizer and livestock manure. This study was conducted to evaluate the usefulness of nutrient (N and P) indices in understanding spatial variations of water quality across Chonnam province which is a typical agricultural region in Korea. METHODS AND RESULTS: The nutrient indices including chemical fertilizer supply, livestock manure production, and nutrient balance were correlated with water quality data (T-N, T-P, BOD, and COD) for the twenty-two districts of the province. Concentration of T-N were positively correlated with chemical fertilizer supply, livestock manure N production, and nutrient balance (P<0.05 or P<0.01). Meanwhile, T-P concentration was not correlated with these nutrient indices; however, there was a tendency that T-P concentration increases with livestock manure P production (P=0.06) and with nutrient balance (P=0.09). These results suggest that T-N concentration is susceptible to both chemical fertilizer and livestock manure; whereas T-P is likely to be affected by livestock manure rather than chemical fertilizer. The concentrations of BOD and COD were also positively (P<0.05 or P<0.01) correlated with livestock manure production. CONCLUSION: This study shows the usefulness of nutrient indices in understanding spatial variations of water quality and suggests that livestock manure rather than chemical fertilizer can be a more critical water pollution source and thus highlights the need for more attention to livestock manure treatments for rural water quality management.

• Journal of the Korean Electrochemical Society
• /
• v.19 no.3
• /
• pp.80-86
• /
• 2016

High Ni content layered oxide materials for the positive electrode in lithium-ion batteries have high specific capacity. However, their poor electrochemical and thermal stability at elevated temperature restrict the practical use. A small amount of $Al_2O_3$ was added to the mixture of transition metal hydroxide and lithium hydroxide. The $LiNi_{0.6}Co_{0.2}Mn_{0.2}O_2$ was simultaneously doped and coated with $Al_2O_3$ during heat-treatment. Electrochemical characteristics of modified $LiNi_{0.6}Co_{0.2}Mn_{0.2}O_2$ were evaluated by the galvanostatic cycling and the LSTA(linear sweep thermmametry) at the constant voltage conditions. The nano-sized $Al_2O_3$ added materials show better cycle performance at elevated temperature than that of micro-sized $Al_2O_3$. As the added amount of nano-$Al_2O_3$ increased, the thermal stability of electrode also enhanced, but the use of 2.5 mol% Al showed the best high temperature performance.

• Economic and Environmental Geology
• /
• v.56 no.6
• /
• pp.847-870
• /
• 2023

The safe disposal of high-level radioactive waste requires accurate predictions of the long-term geochemical behavior of radionuclides. To achieve this, the present study was conducted to model geochemical behaviors of uranium (U), plutonium (Pu), and palladium (Pd) under different hydrogeochemical conditions that represent deep groundwater in Korea. Geochemical modeling was performed for five types of South Korean deep groundwater environment: high-TDS saline groundwater (G1), low-pH CO₂-rich groundwater (G2), high-pH alkaline groundwater (G3), sulfate-rich groundwater (G4), and dilute (fresh) groundwater (G5). Under the pH and Eh (redox potential) ranges of 3 to 12 and ±0.2 V, respectively, the solubility and speciation of U, Pu, and Pd in deep groundwater were predicted. The result reveals that U(IV) exhibits high solubility within the neutral to alkaline pH range, even in reducing environment with Eh down to -0.2 V. Such high solubility of U is primarily attributed to the formation of Ca-U-CO₃ complexes, which is important in both G2 located along fault zones and G3 occurring in granitic bedrocks. On the other hand, the solubility of Pu is found to be highly dependent on pH, with the lowest solubility in neutral to alkaline conditions. The predominant species are Pu(IV) and Pu(III) and their removal is predicted to occur by sorption. Considering the migration by colloids, however, the role of colloid formation and migration are expected to promote the Pu mobility, especially in deep groundwater of G3 and G5 which have low ionic strengths. Palladium (Pd) exhibits the low solubility due to the precipitation as sulfides in reducing conditions. In oxidizing condition, anionic complexes such as Pd(OH)₃^-, PdCl₃(OH)₂^-, PdCl₄^2-, and Pd(CO₃)₂^2- would be removed by sorption onto metal (hydro)oxides. This study will improve the understanding of the fate and transport of radionuclides in deep groundwater conditions of South Korea and therefore contributes to develop strategies for safe high-level radioactive waste disposal.