• Journal of the Korean Institute of Gas
• /
• v.13 no.5
• /
• pp.26-32
• /
• 2009

Ni catalysts on mesoporous silica and commercial silica were prepared for the methanation. XRD and TPR analyses indicated that Ni/mesoporous silica had smaller metal particle size and higher metal dispersion than that of Ni/commercial silica. In addition, Ni/mesoporous silica had stronger metal-support interaction. In methanation, Ni/mesoporous silica showed higher CO conversion and methane yield (65%) than Ni/commercial silica (58%). In the characterization results of catalysts after reaction, Ni/commercial silica was deactivated by the collapse of structure and metal sintering, but Ni/mesoporous silica showed stable catalytic performance.

• Journal of the Korean Chemical Society
• /
• v.27 no.2
• /
• pp.127-132
• /
• 1983

The catalytic activity of ZSM-5 catalyst for the disproportionation of toluene is dependent on the type of cation exchanged, the degree of ion-exchange and the reaction temperature. The activity increases in the order of alkaline-, alkali earth-, hydrogen, and rare-earth-exchanged ZSM-5 and decreases with increasing degree of cation exchange. Among the ion-exchanged ZSM-5 catalyst, only Cs-ZSM-5 shows predominant selectivity for p-xylene. The selectivity increases with increasing degree of $Cs^+$-exchange and decreasing reaction temperature. This phenomenon is interpreted in terms of shape selectivity arising from the partial blocking of channel intersections by large cesium ions.

• Journal of the Microelectronics and Packaging Society
• /
• v.1 no.1
• /
• pp.33-40
• /
• 1994

금속박막 증착 전 Ar 이온을 이용한 폴리이미드 표면의 RF 스퍼터링 처리가 Cr/폴 리이미드 계면의 접착력과 반응성에 미치는 영향에 대하여 90。 peel test, TEM, FTIR 및 XPS를 사용하여 연구하였다. Cr/폴리이미드 계면의 접착력은 촐리이미드 표면은 RF 스퍼 터링 처리에 의해 1g/mm에서 100g/mm로 현저히 증가하였다. 표면 비저항 측정과 FTIR 및 XPS 분석결과 RF 스퍼터링 처리에 의한 Cr/폴리이미드 계면의 접착력 증가는 RF 스퍼 터링에 의한 폴리이미드 표면의 chemical modification 에 의해 증착되는 Cr과 계면 반응성 이 향상되는데 기인하는 것임을 밝혔다.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2008.05a
• /
• pp.227-230
• /
• 2008

본 논문은 알칼리토금속계인 마그네슘 등의 수화 반응에 수반되는 반응열과 전기화학적 작용을 이용하여 버너와 같은 화기를 이용하지 않고 야외에서 생수 등을 간접가열 하여 커피, 컵라면, 분유, 피자등의 음식을 가열 할 수 있는 발열제품을 개발하는 데이터를 얻었다. 마그네슘과 금속계 화합물을 혼합하여 tea bag에 넣어 셀 형태로 만들어 발열효과를 높이기 위해 특수시험관의 재질 및 두께의존성, 발열제 양과 혼합물질에 따른 온도특성 등을 확인하였다. 발열제에서 발생되는 열의 효율적인 전달과 포장 재질의 선정 및 휴대의 간편성 등을 고려하여 타당성을 검증하였다.

• Applied Chemistry for Engineering
• /
• v.7 no.5
• /
• pp.913-924
• /
• 1996

In this study HDS(hydrodesulfurization) of thiophene was researched over nickel catalysts added with small amounts of neodymium which were prepared by different methods such as unsupported coprepricipitated NdNi catalysts, unsupported intermetallic $NdNi_5$ catalysts, and carbon supported NdNi catalyst. The HDS activity was remarkably increased when a small amounts of neodymium was added to unsupported coprecipitated Ni catalysts. Thus it was known that the role of Nd is important in HDS of thiophene of Ni catalysts. For the case of unsupported intermetallic $NdNi_5$, the intermetallic crystallinity was destroyed to oxide and sulfide after calcination and presulfidation respectively. The HDS activity of thiophene can be explained by surface area of unsupported catalysts. And Nd acts like as structural promoter keeping the high surface area of unsupported catalysts. The HDS activity was increased by each ten times based on 1 gr. of nickel in the order of unsupported intermetallic $NdNi_5$, unsupported coprecipitated NdNi, and carbon supported NdNi catalysts according to different preparation method of catalysts.

• Journal of the Korean Institute of Gas
• /
• v.26 no.2
• /
• pp.14-20
• /
• 2022

In this study, the catalytic reaction characteristics for producing hydrogen using methanol steam reforming were investigated. Nickel and copper are frequently used in steam reforming reaction and methanol synthesis, were used as main active metals. As a support, hydrotalcite has a high specific surface area, excellent porosity and thermal stability, and has weak Lewis acid sites and basic properties. Hydrotalcite was used to identify catalysts of methanol steam reforming with catalytic activity and their properties. In this research, high reactivity was shown in the catalyst of copper metal with high reducibility. And increasing of active metal loading showed the higher the methanol conversion and hydrogen selectivity.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 1998.11a
• /
• pp.52-56
• /
• 1998

최근 들어 국외에서는 오염된 지하수의 정화기술로써 0가 금속을 이용한 방법이 높은 잠재력을 가진 신기술로 알려져 있다. 본 연구에서는 0가 금속중 나노크기(1-100nm)를 가진 0가 철입자를 이용하여 수중의 NO$_3$￣를 탈질처리하는 실험을 행하였다. 본 실험에서 제조한 나노크기 0가 철입자는 상온상압의 환원적 조건에서 50, 100, 200, 400mg/$\ell$의 NO$_3$￣와 반응하여 반응시간 30분안에 95%이상 제거되는 높은 반응성을 보여주었다. 기존의 상업용 철입자(10-100$\mu\textrm{m}$)를 이용한 NO$_3$￣의 제거결과에서 보여주는 다량의 철사용, 낮은 적용 오염농도, 그리고 낮은 반응속도등의 문제점에 비하여 나노크기 철 입자는 높은 오염농도범위에서도 적은 철 주입량과 짧은 반응시간 내에 매우 높은 제거효율(10-100배)을 나타내었다. 이러한 결과로 수중의 NO$_3$￣의 고속 탈질반응속도에 영향을 주는 중요한 변수는 반응에 참여하는 철 입자의 비표면적임을 알 수 있었다. 본 연구에서 얻은 batch실험 결과를 바탕으로 NO$_3$￣로 오염된 지하수의 정화를 위한 현장 적용을 목표로 연속처리 공정의 설계를 위한 토대를 마련하고자 하였다.

• Economic and Environmental Geology
• /
• v.38 no.3 s.172
• /
• pp.237-245
• /
• 2005

The batch tests were performed to evaluate the applicability of the permeable reactive barrier (PRB) to in-situ treatment of groundwater with high concentration of heavy metals. The lead\chates used in this study were collected from waste rock dump of the Imgy mine, and have a low pH and high metal concentration. The acidity loading was 65kg as $CaCO_3/day$, metal loading of Fe+Al+Mn was 11.6kg/day. This type of water could be treated with biological-mediated sulfate reduction using the organic carbon mixture as a reactive media. The batch tests were carried out with five mixtures that were composed with different mixing ratios of mushroom compost, pine-tree bark, and limestone cheep. Results indicated that the PRB could reduce the acidity loading $CaCO_3/day$ to 12.3kg and reduce the metal loading to 3.3kg/day. Considering about the low pH and high metal loading, the contaminated water may be ameliorated by passing it through the buffering PRB composed with inorganic carbonate materials and then through the PRB composed with the organic carbon mixture which can induce sulfate reduction.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.24 no.5
• /
• pp.143-149
• /
• 2020

The purpose of this study is to manufacture a variable density - hybrid lattice structure control by filling the pore of the metal addictive manufactured lattice structure with lightweight reactive acrylic compounds(RAC). To apply the variable density - hybrid lattice structure to the construction industry, the enhancing adhesion - reactive acrylic compounds(EA-RAC) which increased the adhesion strength was manufactured by adding ordinary portland cement to the RAC. Finally, the EA-RAC was filled into the lattice structure to test the specific density, water absorption, and adhesion strength of the variable density - hybrid lattice structure. The results were obtained with density controllable, water absorption less than 1.0%, and 1-day bonding strength of 1.78 MPa to 1.98 MPa.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1997.10a
• /
• pp.509-515
• /
• 1997

환상형 이중벽 증기발생기와 환상형 전자펌프 신개념을 개발하여 중간열교환계통과 소듐 배관이 없는 단순하고 밀집된 형태의 액체금속로인 SAILMER 노형 개념을 제안하였다. 금속핵연료를 사용하는 모듈형으로 증기발생기에서의 소듐과 물 반응사고에 대비한 연구와 제작기술을 제고시키면 이 노형은 경제성과 고유안전성을 동시에 구현할 수 있다.