• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.33 no.5
• /
• pp.397-405
• /
• 2015

Currently, Korea's digital maps are being produced through traditional aerial photogrammetry methods. Aerial photogrammetry is the most economical way to produce a map of a wide area. However, timely survey is not allowed depends on weather condition and it is inefficient for small area surveying in economic point of view. Therefore, it costs too much and needs long time to produce a map for various small areas where are terrestrial changes for updating the map. In contrast, UAV photogrammetry is possible to work even in cloudy weather because of shooting at low altitude below the clouds. It also has excellent mobility and shoot quickly and well suited for small-scale mapping in several places by low cost. In this study, we produced an ortho-photo and digital map with the UAV photogrammetry method using SIFT and SfM algorithm and verified its accuracy to evaluate the applicability for future digital map updates. The accuracy was verified by comparing the results of the ground survey for check points selected on the digital map. Test results show small errors at ±2.6cm in X coordinates, ±2.8cm in Y coordinates and ±5.8cm in height and we could find a possibility that UAV photogrammetry would be fully applicable for digital map updating.

• Proceedings of the Korean Society for Emotion and Sensibility Conference
• /
• 1998.11a
• /
• pp.213-217
• /
• 1998

본 연구에서는 고감성 의류상품 개발을 위한 기초 자료들 제공하기 위해 폴리에스테르 직물에 대한 감각·감성을 1, 2단계로 나누어 분석하였다. 1단계에서는 얇은 여성 외의용 폴리에스테르 24종을 사용하여 감성측정에 영향을 미치는 제요인에 대해 검토하였다. 즉, 감각·감성측정시 기준직물과 그 평가치 제시 유무, 제시방법(blind/ open eye test), 환경과 직물 종류에 따른 효과를 조사하였다. 2단계에서는 1단계의 결과를 토대로 폴리에스테르 10종을 이용하여 환경에 따른 감각·감성과 물성 변인간 관계를 규명하였다. 1. 1단계의 연구결과, 기준직물 제시유무에 따라 감각·감성에 부분적으로 차이가 있었다. 유색직물의 평가시에는 blind/open eye test에 따라서 몇가지 평가용어를 제외하면 전반적으로 직물의 색에 따른 감각.감성에 유의차가 없었다. 2. 감각용어에 대한 요인분석 결과, 표준환경에서 1요인으로 두께, 무게(두껍다. 폭신폭신하다. 가볍다), 2요인으로 표면특성(매끄럽다. 부드럽다. 오돌도돌하다.), 3요인으로 강연성(뻣뻣하다. 보송보송하다)이 추출되었다. 고온다습환경에서도 유사한 결과였다. 3. 환경 효과는 고온다습환경에서 표준환경에서보다 더 눅눅하게, 덜 보송보송하게, 덜 차게 감지하는 것으로 나타났다. 직물의 효과는 모든 용어에서, 환경과 직물의 상호작용효과는 (차다. 보송보송하다. 뻣뻣하다. 하늘하늘하다. 촉감이 졸다.)에서 유의차가 나타났다. 4. 여러 통계기법에 의해 감각·감성 및 물성변인을 분석하여 종합한 결과, 표준환경에서 감성과 관련높은 용어는 (하늘하늘하다), 물성은 SMD로, 고온다습환경에서 감성과 관련 높은 용어는 (보송보송하다), 물성은 Contact area로 밝혀졌다. 폴리에스테르 직물에 대한 감성의 감각구조는 환경에 따라 상이하며 관련 물성 중 표면접촉특성은 환경에 관계없이 가장 중요한 변인으로 작용한다고 할 수 있다.었으며 또한 essential oil에서는 성별 차이가 없는데 반해 페르몬 향의 경우 성별의 차이를 나타내었다.. 방법을 타액과 혈청내 testosterone 농도 측정에 응용하여 RIA의 결과와 비교하여 본 바 상관관계가 타액에서 r=0.969, 혈청에서 r=0.990으로 두 결과가 잘 일치하였다. 본 실험에서 측정된 한국인 여성의 타액내 testosterone농도는 107.7$\pm$12.0 pmol／l이었고, 남성의 타액내 농도는 274.2$\pm$22.1 pmol／l이었다. 이상의 결과로 보아 본 연구에서 정립된 EIA 방법은 RIA를 대신하여 소규모의 실험실에서도 활용할 수 있을 것으로 사려된다.또한 상실기 이후 배아에서 합성되며, 발생시기에 따라 그 영향이 다르고 팽창과 부화에 관여하는 것으로 사료된다. 더욱이, 조선의 ${\ulcorner}$구성교육${\lrcorner}$이 조선총독부의 관리하에서 실행되었다는 것을, 당시의 사범학교를 중심으로 한 교육조직을 기술한 문헌에 의해 규명시켰다.nd of letter design which represents -natural objects and was popular at the time of Yukjo Dynasty, and there are some documents of that period left both in Japan and Korea. "Hyojedo" in Korea is supposed to have been influenced by the letter design. Asite- is also considered to have been "Japanese Letter Jobcheso." Therefore, the purpose of this study is to look into the origin of the letter design

• Fire Science and Engineering
• /
• v.34 no.3
• /
• pp.67-75
• /
• 2020

In this study, the risk of heat generation due to normal and overload currents that vary with the abnormal loosening angle of wire-connecting bolts were identified. The risks were analyzed based on the thermal characteristics to minimize the carbonization accidents of terminal blocks inside distribution panels typically used in industrial sites. We applied a method for measuring the heating temperature and temperature variations in the terminal blocks in real-time by installing a resistance temperature detector sensor board in the terminal block. The experimental results showed that the terminal block model with a low-rated current exhibited a higher heating temperature, thus, confirming the need to select the terminal block capacity based on load currents. Additionally, the higher the rated current of the terminal block with a high-rated current and the higher the degree of loosening, the faster the carbonization point. Such heating temperature monitoring enabled real-time thermal temperature measurement and a step-by-step risk level setting through thermal analysis. The results of the measurement and analysis of carbonization risks can provide a theoretical basis for further research regarding the risk of fire due to carbonization. Furthermore, the deterioration measurement method using the temperature sensor board developed in this study is widely applicable to prevent fires caused by poor electrical contact as well as risk-level management.

• Investigative Magnetic Resonance Imaging
• /
• v.5 no.1
• /
• pp.57-65
• /
• 2001

Purpose : $T_2$-weighted half courier Echo Planar Imaging (T2HEPI) method is proposed to reduce measurement time of existing EPI by a factor of 2. In addition, high $T_2$ contrast is obtained for clinical applications. High resolution single-shot EPI images with $T_2$ contrast are obtained with $128{\times}128$ matrix size by the proposed method. Materials and methods : In order to reduce measurement time in EPI, half courier space is measured, and rest of half courier data is obtained by conjugate symmetric filling. Thus high resolution single shot EPI image with $128{\times}128$ matrix size is obtained with 64 echoes. By the arrangement of phase encoding gradients, high $T_2$ weighted images are obtained. The acquired data in k-space are shifted if there exists residual gradient field due to eddy current along phase encoding gradient, which results in a serious problem in the reconstructed image. The residual field is estimated by the correlation coefficient between the echo signal for dc and the corresponding reference data acquired during the pre-scan. Once the residual gradient field is properly estimated, it can be removed by the adjustment of initial phase encoding gradient field between $70^{\circ}$ and $180^{\circ}$ rf pulses. Results : The suggested T2EPl is implemented in a 1.0 Tela whole body MRI system. Experiments are done with the effective echo times of 72ms and 96ms with single shot acquisitions. High resolution($128{\times}128$) volunteer head images with high $T_2$ contrast are obtained in a single scan by the proposed method. Conclusion : Using the half courier technique, higher resolution EPI images are obtained with matrix size of $128{\times}128$ in a single scan. Furthermore $T_2$ contrast is controlled by the effective echo time. Since the suggested method can be implemented by software alone (pulse sequence and corresponding tuning and reconstruction algorithms) without addition of special hardware, it can be widely used in existing MRI systems.

• Korean Journal of Soil Science and Fertilizer
• /
• v.39 no.1
• /
• pp.1-7
• /
• 2006

To designate rural landscape spatially, land use and topographic features for 383 of "Ri"s or "Dong", which is a basic administrative unit in Korea, were analyzed using GIS application. We have categorized rural landscape into three types such as agricultural, natural and urban landscape by land use. On the basis of spatial landscape pattern, rural area could be classified into 6 groups of Mountainous area (MA), Mountainous village area (MV), Developing mountainous village area (DM), Plain agricultural area (PA), Developing plain village area (DP) and Urbanized area (UA) according to the ratios of land for agricultural and urban use as the criteria. In MA, the ratio of upland area including orchard was slightly larger than that of paddy, while that of paddy was about 1.5 times larger than upland in other groups. Forested area was distributed more than two-thirds among natural landscape area in MA, MV and DM. In plain types (PA and DP), the ratio of irrigated paddy was extremely larger than partially irrigated paddy and the ratio of water body area among the natural landscape area was two times as large as that of forested area. The ratio of land for industrial and livestock facilities among urban landscape area were 20% or more in MV, DM and DP, and it means that these facilities are mainly distributed in the developing ru ral area where residents and industry are closely related each other. According to the relative ratio of sloped land of 6 categorized areas, the MA area have lots of land with E and F slopes and MV and DM have all grades of sloped land evenly distributed in relative to other types of rural landscape. It has been showed that PA, DP and UA occupied more than two-thirds of land with A or B slope. In case of the analysis of topological distribution in 6 types of rural landscape, there were overwhelmingly lager highland areas in MA. Conclusively, we have confirmed that 6 types of rural landscape classified by land use pattern in 3 categorized areas such as agricultural, natural and urban landscape area would be useful for the management of rural area. For development of sustainable agriculture and the preservation of rural amenity, proper management ways should be properly applied according to rural landscape patterns.

• Journal of the Korean Data and Information Science Society
• /
• v.28 no.5
• /
• pp.1153-1165
• /
• 2017

Structural equation modeling (SEM) is a basic tool for testing theories in a variety of disciplines. A maximum likelihood (ML) method for parameter estimation is by far the most widely used in SEM. Alternatively, two-stage least squares (2SLS) estimator has been proposed as a more robust procedure to address model misspecification. A regularized extension of 2SLS, two-stage ridge least squares (2SRLS) has recently been introduced as an alternative to ML to effectively handle the small-sample-size issue. However, it is unclear whether and when misspecification and small sample sizes may pose problems in theory testing with 2SLS, 2SRLS, and ML. The purpose of this article is to evaluate the three estimation methods in terms of inferences errors as well as parameter recovery under two experimental conditions. We find that: 1) when the model is misspecified, 2SRLS tends to recover parameters better than the other two estimation methods; 2) Regardless of specification errors, 2SRLS produces small or relatively acceptable Type II error rates for the small sample sizes.

• KIPS Transactions on Computer and Communication Systems
• /
• v.8 no.6
• /
• pp.127-138
• /
• 2019

The data response speed is a critical issue of cloud services because it directly related to the user experience. As such, the in-memory database is widely adopted in many cloud-based applications for achieving fast data response. However, the current implementation of the in-memory database is mostly based on the linked list-based hash table which cannot guarantee the constant data response time. Thus, cuckoo hashing was introduced as an alternative solution, however, there is a disadvantage that only half of the allocated memory can be used for storing data. Subsequently, bucketized cuckoo hashing (BCH) improved the performance of cuckoo hashing in terms of memory efficiency but still cannot overcome the limitation that the insert overhead. In this paper, we propose a data management solution called Wall Cuckoo which aims to improve not only the insert performance but also lookup performance of BCH. The key idea of Wall Cuckoo is that separates the data among a bucket according to the different hash function be used. By doing so, the searching range among the bucket is narrowed down, thereby the amount of slot accesses required for the data lookup can be reduced. At the same time, the insert performance will be improved because the insert is following up the operation of the lookup. According to analysis, the expected value of slot access required for our Wall Cuckoo is less than that of BCH. We conducted experiments to show that Wall Cuckoo outperforms the BCH and Sorting Cuckoo in terms of the amount of slot access in lookup and insert operations and in different load factor (i.e., 10%-95%).

• The Journal of Society for e-Business Studies
• /
• v.8 no.2
• /
• pp.99-111
• /
• 2003

By virtue of diverse advantages derived from digital media, eBook is getting started to use. And many market research agencies have predicted that its market will be greatly expanded soon. But against those expectations, copyright-related problems and the difficulties of its accessing inherited from various eBook content formats become an obstacle to its diffusion. The first problems can be solved by DRM technology. And to solve the second problems, each nation has published its own content standard format. But the domestic standards are useful only the domestic level, they still leave the problems in the national level. The variety of content formats has created a demand for mechanisms that allow the exchange of eBook contents. Therefore we study the mapping relations between eBook contents for conversion. To define the mapping relations, first we extract the mapping both between eBook contents and between normal XML documents. From those mappings, we define seven mapping relations and classify them by cardinality. And we analyze the classified relations, which can be generated by automatic, or not. Using these results, we also classify the eBook content conversion as automatic, semi-automatic, and manual. Besides, we provide the conversion templates for mapping relations for automatic generation of conversion scripts. To show the feasibility of conversion templates, we apply them to the eBook content conversion. Experiment shows that our conversion templates generate the conversion scripts properly. We expected that defined mapping relations and conversion templates can be used not only in eBook content conversion , but also in normal XML document conversion.

• Korean journal of communication and information
• /
• v.32
• /
• pp.209-245
• /
• 2006

This study examines primarily the effects of perceived risk and scarcity massage on consumers in CATV homeshopping. For consumers, the perceived risk is the cause of delaying purchase decision in CATV Homeshopping while scarcity message in the Ad facilitate purchasing intention in the CATV homeshopping. And another important characteristic of consumer which exerts impact on the response of consumer to the Ad and the product is the frequency of purchasing experience. Thus the purpose of this study is to test the effect of 3 factors on consumer's response to homeshopping Ad and product: one is perceived risk, another is scarcity message and the third is consumer's difference in purchasing. And these are defined as independent variables. The responses of the consumer, the dependent variables of this test are measured in three dimensions; 1) the purchasing intention of the product, 2) the attitude toward the Ad, and 3) the attitude toward product of the consumer. 110 housewives are sampled and assigned to 4 experimental groups. All the groups first watched a video-taped homeshopping Ad messages, and then filled up their responses on the administered questionnaire. The results of this study shows as follows: 1) Perceived risk has negative effect to consumer response. 2) Scarcity message has positive effect to consumers response. 3) But especially perceived risk has negative effect to high frequency purchasing experience group. 4) Scarcity message has also negative effect to high frequency purchasing experience group. 5) The interaction effect of perceived risk and scarcity message is most prominent to the consumers of high frequent purchasing experience.

• The Journal of Korean Academy of Prosthodontics
• /
• v.49 no.2
• /
• pp.168-176
• /
• 2011

Purpose: This study aims at investigating the influence of various insertion torques on thermal changes of bone. A proper insertion torque is derived based on the thermal analysis with two different implant designs. Materials and methods: For implant materials, bovine scapula bone of 15 - 20 mm thickness was cut into 35 mm by 40 - 50 mm pieces. Of these, the pieces having 2 - 3 mm thickness cortical bone were used as samples. Then, the half of the sample was immersed in a bath of $36.5^{\circ}C$ and the other half was exposed to ambient temperature of $25^{\circ}C$, so that the inner and surface temperatures reached $36.5^{\circ}C$ and $28^{\circ}C$, respectively. Two types of implants ($4.5{\times}10\;mm$ Br${\aa}$nemark type, $4.8{\times}10\;mm$ Microthread type) were inserted into bovine scapula bone and the temperature was measured by a thermocouple at 0.2 mm from the measuring point. Finite element method (FEM) was used to analyze the thermal changes at contacting surface assuming that the sample is a cube of $4\;cm{\times}4\;cm{\times}2\;cm$ and a layer up to 2 mm from the top is cortical bone and below is a cancellous bone. Boundary conditions were set on the basis of the shape of cavity after implants. SolidWorks was used as a CAD program with the help of Abaqus 6.9-1. Results: In the in-vitro experiment, the Microhead type implant gives a higher maximum temperature than that of the Br${\aa}$nemark type, which is attributed to high frictional heat that is associated with the implant shape. In both types, an Eriksson threshold was observed at torques of 50 Ncm (Br${\aa}$nemark) and 35 Ncm (Microthread type), respectively. Based on these findings, the Microthread type implant is more affected by insertion torques. Conclusion: This study demonstrate that a proper choice of insertion torque is important when using a specific type of implant. In particular, for the Microthread type implant, possible bone damage may be expected as a result of frictional heat, which compensates for initial high success rate of fixation. Therefore, the insertion torque should be adjusted for each implant design. Furthermore, the operation skills should be carefully chosen for each implant type and insertion torque.