• Proceedings of the Acoustical Society of Korea Conference
• /
• spring
• /
• pp.443-446
• /
• 2002

해양연구원에서는 최근에 5면에 흡음재를 부착하여 반사파의 영향을 최소화한 무향수조를 제작하였다. 본 논문에서는 사각, 삼각, 해닝, 램프 등 4종류의 임펄스 신호를 이용하여 표면 및 벽면에서의 반사파 특성을 해석하고 있다. 표면 반사파의 경우 프로젝터의 가장 근접한 위치에서의 음압신호는 직접파 및 반사파의 관계가 주파수에 관계없이 일정한 반면 멀리 떨어진 위치에서는 반사파가 더 크게 나타나는 현상이 관찰되었다. 이는 중간에 위치한 하이드로폰의 간섭 현상에 의한 것으로 판단된다. 흠음 벽면의 경우 반사파는 거의 존재하지 않으며 따라서 반사계수는 측정한 주파수 범위$(\~100kHz)$에서 거의 0에 가까운 것을 확인할 수 있었다. 이로서 무향수조의 특성이 만족할만한 수준인 것을 확인하였다.

• Journal of Korea Spatial Information System Society
• /
• v.5 no.1 s.9
• /
• pp.39-47
• /
• 2003

The purpose of this paper is to present the method of acquiring 3D GIS data using the statistical estimating methods of Well Log for balancing Seismic data. We use the reflection coefficients of seismic data to get the parameters for the reservoir characterization and we balance the reflection coefficients of seismic data using well log to increase the confidence of the estimated result. Well logs are required to balance the reflection coefficients at the point where seismic data are acquired. In this research, we discuss the geostatistical estimation methods and we applied these methods to real data. Kriging gives high weights to the close well logs, which means estimated results are mainly affected by close well log. High value of cross variograms gave big difference on cokriging result comparing to kriging results and low value of cross variogram gave little differences.

• The Journal of the Acoustical Society of Korea
• /
• v.25 no.5
• /
• pp.246-256
• /
• 2006

The plane wave reflection coefficient is an acoustic property containing all the information concerning the ocean bottom and can be used as an input parameter to various acoustic propagation models. In this paper, we measure the plane wave reflection coefficient, the sound speed, thd the attenuation for saturated granular medium in the water tank. Three kinds of glass beads and natural sand are used as the granular medium. The reflection experiment is performed with the sinusoidal tone bursts of 100 kHz at incident angles from 28 to 53 degrees, and the sound speed and attenuation experiment are performed also with the same signal. From the measured reflection signal, the reflection coefficient is calculated with the self calibration method and the experimental uncertainties are discussed. The sound speed and the attenuation measurements are used for the estimation of the porosity and permeability, the main Biot parameters. The estimated values are compared to the directly measured values and used as input values to the Biot theory in order to calculate the theoretical reflection coefficient. Finally, the reflection coefficient predicted by Biot theory is compared to the measured reflection coefficient and their characteristics are discussed.

• Korean Journal of Optics and Photonics
• /
• v.12 no.1
• /
• pp.1-4
• /
• 2001

Via terahertz (THz) reflection radar, the characterizations of reflected THz electromagnetic pulses are reported. Quasi-optical techniques are used to efficiently reflect pulses of THz electromagnetic radiation from an aluminum mirror and several conducting and nonconducting materials. An incident THz pulse is reflected up to 9 times to know the magnitude change of a reflected pulse from the aluminum mirror. Using this method, aluminum board, undoped silicon, quartz, and LDPE samples' reflection coefficient and index of refraction can be measured. These results suggest a possible application of transient THz reflection spectroscopy without surface contact.ontact.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.17 no.5 s.108
• /
• pp.490-499
• /
• 2006

In this paper, we present the newly developed propagation toss model of a long range maritime communication channel, measured by a ground to air flight test, and discuss its validity compared with the predictive value based on the spherical earth reflection model. To measure the propagation loss, actual flight test was performed in the Yellow Sea and the measurement of receiving signal strength was made for overall test range. As far as the test condition is concerned, it is expected that the receiving signal strength must be interfered with the reflected wave by an island existing around the reflection point. Therefore we introduce some modifications on the conventional spherical earth reflection model by including the effect due to the reflected wave from the island. And then, we compare the path loss measured by flight test with that one analyzed by the spherical earth reflection model accounting for reflected wave of the island. As a result of the comparison, it is verified to predict the path loss accurately by the spherical earth reflection model including the effect due to the reflected wave from an island for a long range ground to air communication.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.23 no.8
• /
• pp.967-975
• /
• 2012

This paper presents a method to measure reflection coefficients of microwave devices or antennas based on time domain analysis with sampling oscilloscopes. The reflection coefficients were extracted by the Fourier transformation of echo pulses from devices with respect to the 20 GHz incident pulse signals. The three-error terms, which are commonly used for the correction of a microwave network, were determined using a 3.5 mm calibration kit. In addition, a modified error-correction model associated with a directional coupler for reflection coefficient measurements is introduced. The results were compared with those of measured with a commercial vector network analyzer.

• Geophysics and Geophysical Exploration
• /
• v.9 no.2
• /
• pp.139-147
• /
• 2006

We had conducted a numerical modeling to investigate seismic properties of gas hydrate with field parameters acquired over the East sea in 1998. We used a 2-D staggered grid finite difference method to generate synthetic elastic seismograms for multi-channel seismic survey, OBC (Ocean Bottom Cable) survey and VCS (Vertical Cable Seismic) survey. The results of this study showed that the method using staggered grid yielded stable results and could be used to seismic imaging. We could find out the high amplitude anomaly and the phase reversal phenomenon of reflection wave at interface between the gas hydrate layer and free gas layer such a BSR (Bottom Simulating Reflector) which is the evidence for existence of gas hydrate in seismic reflection data. And we computed the reflection coefficients at the incident angles corresponding to offset distance with the synthetic seismograms. The reflection coefficients acquired from the numerical modeling were nearly consistent with the reflection coefficient computed by Shuey's equation.

• Journal of Ocean Engineering and Technology
• /
• v.14 no.2
• /
• pp.1-6
• /
• 2000

Wave energy absorption by a flap equipped with a harbor in a water of finite depth is studied. The wave potential is calculated by a hybrid integral equation consisting of Green integral equations associated with Rankine and Kelvin Green functions. The absorbed wave energy is calculated by both the near-field and far-field methods. The present methods can be used for the design of a flap-harbor wave energy absorber since the numerical results by the two methods are in good agreement.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1994.04a
• /
• pp.206-211
• /
• 1994

본 연구에서는 임의의 복소 음압 분포를 무한 평면에서 공간상의 Fourier 변환을 하여서 평면파 요소들의 중첩으로 해석하는 방법을 살펴보고 제한된 측정 조건에서 유발되는 문제들을 음원의 주파수에 대해서 모의 실험을 통하여 고찰해보았다. 실험으로는 단단한 시편(hard panel)과 스폰지(sponge)에 대해서 공간상의 fourier 변환을 통해 반사 계수를 얻고 수직입사에 대해 2-마이크로폰 방법으로 구한 반사계수와 비교하였다. 특히 다공성 물질인 스폰지에 대해서는 유동 저항을 측정하여 실험식으로부터 구한 반사 계수와의 비교를 하였으며 공간상의 음압 분포로부터 구한 반사계수에서 창문함수의 영향을 살펴보았다.

• Composites Research
• /
• v.20 no.1
• /
• pp.15-22
• /
• 2007

As a fundamental approach to studying elastic wave behaviors in fiber-reinforced composites, this paper introduces the analytical method to predict the modes, directions, and amplitudes of all reflected waves that are generated by free-surface reflection in fiber-reinforced composites. The paper also explores a new phenomenon where a reflected wave that is predicted to exist in accordance with the slowness surface may disappear. This may occur when the angle of incidence of a quasi-shear wave exceeds a newly defined critical angle, named the third critical angle. It is hoped that the analytical approach introduced in this paper will provide an easy-to-follow guideline for researchers in the relevant area such as ultrasonic nondestructive testing.