• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.23 no.1
• /
• pp.29-37
• /
• 2012

In this paper, a stabilizd system operation through a composition of a protective circuit and an improvement of active reflection coefficient(ARC) is studied. Unlike the passive-phased array antenna, the APPA is a combined form of radiating element and transmitter-reciever module. Therefore, a definition of new ARC that differentiates itself from typical passive-phased array antenna must apply. The ARC is a reflection coefficient considering a superposition of a coupling from nearby radiating elements and self reflection. It is an important parameter that predicts and analyzes charateristics of a APPR system. A high level ARC is a direct source inducing a performance degradation of a system. In this paper, as a method for a stabilized operation of APAR, one method for improving a performance and another for degradation prevention are analyzed. An effectiveness of two methods was validated using experiment results of real-fabricated active-phased array antenna.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.42 no.6
• /
• pp.505-514
• /
• 2014

The effects of reflected wave of the sea on pseudolite ranging accuracy are analysed in this paper, when a pseudolite navigation system is used for wide area outdoor applications such as aircraft and vessels positioning. Methods for minimizing the influence of sea surface reflection wave were proposed. The methods include the appropriate correlator in pseudolite navigation system through the correlation performance comparison analysis in receiver design, the use of the technology of multiple antennas, and locating the transmitting station antenna on an appropriate position. From the results of experiments, the method of locating the antenna position shows the most reliable performance against the effect of surface reflection wave. The analysis results of the ranging accuracy improvement are addressed, when the multipath caused by sea surface reflection exists.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2013.06a
• /
• pp.270-272
• /
• 2013

In order to protect coastal facilities mainly from wave and current actions, the self-locking bio blocks constituting component elements of protecting structures against scouring were designed. These blocks are adapted to the sloping bottom, coastal dunes, and submerged coastal base counteracting the destructive and erosive impulse action. A series of laboratory experiments is necessary to investigate the reflection of water waves over and against a train of protruded or submerged shore structures and compare the reflecting capabilities of incident waves including wave forces. In this study the hydraulic model experiment was conducted to identify the performance of newly designed water affinity bio blocks to keep the coast slope and bottom mound from scouring by reduction of the reflection coefficient and to convince stability of the placements. Revised design of each element of blocks were also tested for field conditions. From the result of experiment, the field applicability of the developed blocks and placement is to be discussed afterward.

• Electronics and Telecommunications Trends
• /
• v.24 no.3
• /
• pp.103-111
• /
• 2009

이동체 내에서 방송통신 서비스를 제공하기 위해서는 무선망과 위성망을 연계하는 시스템 사용이 요구되며, 위성으로부터의 신호를 끊김없이 제공하기 위해서는 위성 추적 안테나가 필요하다. 위성 추적 안테나는 이동체의 외부에 주로 장착되기 때문에 가벼우면서도 저고도형이어야 한다. 또한 랜덤한 이동체의 동작 상태에서도 연속해서 안테나 빔이 위성을 향하도록 하기 위한 추적 기술이 요구된다. 양질의 서비스 제공을 위해 전기적으로 우수한 성능을 가지면서도 물리적인 제약을 극복하기 위한 위성 추적 안테나 개발이 선진국을 중심으로 추진중에 있다. 이에 본 고에서는 반사판 및 위상배열 형태로 개발되고 있는 위성 추적 안테나의 기술동향을 파악하고 한국전자통신연구원에서 개발중인 안테나를 소개하고자 한다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2020.06a
• /
• pp.193-193
• /
• 2020

집중호우로 인한 이재민 발생, 침수 등 많은 인명 및 재산 피해가 지속적으로 발생함에 따라, 홍수재해를 사전에 대응하는 다양한 방법에 대한 관심이 증가하고 있다. 본 연구에서는 레이더 반사도를 이용하여 강우의 이동방향과 이동속도를 추정하여 초단기 정량강우예측(QPF)이 가능한 기법을 개발하고, 2016년 태풍 차바 사상에 대하여 비슬산 레이더자료를 이용하여 분석을 실시하였다. 개발기법은 1단계 레이더 강우강도 앙상블 멤버 생성, 2단계 레이더 강우강도 이동속도 계산, 3단계 레이더 강우강도 앙상블 초단기 예보, 4단계 초단기 예보 검증의 과정으로 이루어진다. 본 연구결과물인 레이더 기반 초단기 강우예측자료는 수치예보기반 강우예측자료 및 다양한 레이더 기반 초단기예보자료들과 함께 강우예측율 향상에 기여할 것으로 판단된다.

• Korean Journal of Optics and Photonics
• /
• v.15 no.2
• /
• pp.149-157
• /
• 2004

We have calculated the power extraction efficiency and the lasing wavelength distribution of complex-coupled(CC) DFB lasers above threshold for various｜$\chi$L｜ and facet reflectivity combinations, and we have compared the results with those at threshold. Also, we have investigated the effect of coupling coefficient ratio(CR) and the reflectivity of AR facet on the power extraction efficiency and the lasing wavelength distribution. At threshold, the single mode yield as a function of power extraction efficiency of in-phase(IP) CC DFB lasers is the same as that of anti-phase(AP) CC DFB lasers. Above threshold, however, the single mode yield as a function of power extraction efficiency of IP CC DFB lasers is much larger than that of AP CC DFB lasers. For IP CC DFB lasers, AR-HR combination has high single mode yield and large power extraction efficiency compared to other facet combinations. IP CC DFB laser with AR-HR combination for ｜$\chi$L｜of 0.8 has the highest single mode yield and largest power extraction efficiency above threshold among the cases considered. For AR-HR combination, as CR increases and the reflectivity of AR facet decreases, both single mode yield and power extraction efficiency increase due to the reduction of the spatial hole burning effect. For AR-HR combination, the lasing wavelength of CC DFB laser has distributed over the stopband of DFB. As CR increases, the lasing wavelength concentrates on the long wavelength side for IP CC DFB laser, while on the short wavelength side for AP CC DFB laser. As ｜$\chi$L｜ increases, the width of the wavelength distribution decreases and the lasing wavelength moves to the long wavelength side.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.15 no.2
• /
• pp.364-370
• /
• 1995

The purpose of this paper was to develop a nondestructive evaluation method of sintered material by ultrasonic method. The density distribution of sintered material becomes inhomogeneous partially because of the friction between the powder and the die during compaction. The inhomogeneity was investigated by measurement of the energy attenuation coefficient and the shift of the center frequency in the frequency spectrum of the ultrasonic reflection echo. The experimental results showed that the center frequency of reflection wave depended linearly on the density of sintered materials. However, the attenuation coefficient decreased inversely as the density increased. This study shows that the shift of the center frequency in the frequency spectrum of reflection wave can be used to a nondestructive evaluation of sintered materials.

• Communications of Mathematical Education
• /
• v.28 no.2
• /
• pp.219-234
• /
• 2014

Music and mathematics have a lot of structural similarities. Major and minor triads used importantly in music are in a relationship of inversion in which the sequence of the intervals is reversed, which is equivalent to reflection in mathematics. Geometrical expressions help understand structures in music as well as mathematics, and a diagram that shows tonal relationships in music is called Tonnetz. Relationships of reflection between major and minor triads can easily be understood by using Tonnetz, and also, transpositions can be expressed in translation. This study looks into existing Tonnetz and introduces S-Tonnetz newly formed by a mathematical principle.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.19 no.2
• /
• pp.331-337
• /
• 1994

The scatting problem by E-polarized plane wave with obique incidence on a tapered resistive strip grating with zero resistivity(perfectly conducting) at strip-edges is analyzed by the method of moments in the spectral domain. Then the induced surface current density on the strip is expanded in a series of Chebyshev polynomials of the second kind. The expasion coefficients are calculated numerically in the spectral domain, the numerical results of the geometric-optical reflection coefficient for the tapered resistivity in this paper are compared with those for the existing uniform resistivity. And the position of sharp variation points in the magnitude of the geometric-optical reflection coefficient can be moved by varying the incident angle and the strip spacing, It is found out that these sparp variation points are due to the transition of higher mode between the propagation mode and the evanescent mode.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2008.10a
• /
• pp.628-631
• /
• 2008

For the remote sensing purpose, radar systems extract the target information, such as the magnitude of reflectivity and the velocity from the spectrum analysis of return echoes through the Doppler filter bank. This conventional spectrum estimation method, FFT(Fast fourier Transform) is widely used in most radar systems. However, the frequency resolution of return echoes can be seriously degraded in fast moving targets because of the short acquisition time. Since the high Doppler frequency resolution is important in the detection and tracking of fast moving targets, it can cause very unsatisfactory results. Therefore, in this paper, the parameter spectrum estimation method called AR(Autoregressive) spectrum estimation, is investigated to overcome these problems.