• The Journal of the Acoustical Society of Korea
• /
• v.39 no.4
• /
• pp.364-370
• /
• 2020

Rocket noise generated from the exhaust plume produces the enormous acoustic loading, which adversely affects the integrity of the electronic components and payload (satellite) at liftoff. The prediction of rocket noise consists of two steps: the supersonic jet exhaust is simulated by a method of the Computational Fluid Dynamics (CFD), and an acoustic transport method, such as the Helmholtz-Kirchhoff integral, is applied to predict the noise field. One of the difficulties in the CFD step is to remove the boundary reflection artifacts from the finite computation boundary. In general, artificial damping, known as a sponge layer, is added nearby the boundary to attenuate these reflected waves but this layer demands a large computational area and an optimization procedure of related parameters. In this paper, a cost-efficient way to separate the reflected waves based on the two microphone method is firstly introduced and applied to the computation result of a laboratory-scale supersonic jet noise without sponge layers.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2003.11a
• /
• pp.730-734
• /
• 2003

A beamforming method is a kind of spatial filter that focus the amy's signal capturing abilities in a desired direction. In this paper, we detect the location of a source under reflective condition using the multi-dimensional MUSIC algorithm then, we can iud the image source locations from the experimental geometry, and we reconstruct the partial fields for direct wave and reflected wave by using Adaptive nulling algorithm. Numerical simulations are performed to verify its performance under various conditions.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.05a
• /
• pp.625-628
• /
• 2005

Silencers are extensively used for reducing noise in an exhaust system of internal combustion Engine and fluid machineries. The prediction and measurement of the transmission loss as the acoustic performance of silencers are important in early design stage. In the measurement of transmission loss, the semi-anechoic terminations are general used for reducing unwanted effects by reflecting wave. However it is very hard to remove reflecting wave perfectly. So the research about the error made by reflecting wave is important. The analysis about errors made by reflections and modification techniques are proposed. For an application example, the diesel particulate filter (DPF) is chosen. The transmission loss of DPF is measured with and without considerations of reflecting wave.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2009.10a
• /
• pp.330-331
• /
• 2009

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2006.05a
• /
• pp.951-954
• /
• 2006

This Study introduces the design of a reactive type silencer for reducing impulse noises emitted from a high voltage COS fuse of a transformer. When a high voltage COS fuse becomes a short circuit by the over current, the peak sound pressure level above 150dB(A) is generated at the distance of 2m from a COS Fuse. For the purpose of the reduction of impulse noise, in this study. the reactive type silencers have been utilized. The performance of noise reduction for them can be expressed by insertion loss. The reactive silencers have been tested for 23 different types with each different porosity, hole diameter and depth. From the experimental results, it is found that the reactive silencer has an excellent performance to greatly suppress the impulse noise. The one-stage, two-stage and three-stage reactive type silencers have been shown to have the insertion losses of about from 35dB (A) to 25dB(A).

• The Journal of the Acoustical Society of Korea
• /
• v.40 no.4
• /
• pp.314-319
• /
• 2021

The measurement of the Underwater Radiated Noise (URN) for the underwater vehicle should consider both the acoustic interference due to the surface reflection and the calculation of the Closet Point of Approach (CPA). In this paper, I tried to analyze the underwater vehicle's URN using the Lloyd's mirror effect. First, the theoretical Lloyd's mirror pattern was compared with the sea trial result, and the sea trial results corresponded well with the theoretical predicted pattern. And then the CPA distance could be estimated by the Lloyd's mirror pattern. As a results, acoustic source level shows the spectral fluctuation due to the acoustic interference of the Lloyd's mirror effect.

• Proceedings of the Acoustical Society of Korea Conference
• /
• autumn
• /
• pp.189-192
• /
• 1999

수중소음체의 음원 특징을 해석하기 위해서는 배경잡음과 해면$\cdot$해저반사파의 영향이 적은 심해에서 측정하여 분석하여야 한다. 그러나 측정의 어려움으로 인공 수조에서 측정하여 수면과 수조벽에 의해 발생되는 반사파들을 제거하여 신호 고유의 특징을 해석한다 이러한 반사파들의 부가효과를 보상하여 수중소음체의 신호특징을 해석하기 위하여 정합필터배열처리(Matched Filter Array Process : MFAP)기법을 적용하고자 할 때 각 센서에 적용되는 정합필터는 처리시간의 문제로 인해 필터길이를 제한하여 구성되게 된다 정합필터는 수조의 임펄스응답함수의 시역전함수로 정의되는데 필터길이에 따라 수신신호 특징 개선 정도가 좌우된다 본 연구에서는 인공수조에서 부가되는 반사파들의 효과를 보상하여 수신신호 특징 개선을 위해 정합필터배열처리기법을 적용할 때 각 센서의 정합필터의 시간길이가 특징 개선에 미치는 영향을 신호대잡음비(SNR)로 정의하여 분석하였고 수조의 특성에 따른 최적의 정합필터 시간길이를 제안하고자 한다.

• Journal of the Korean Society for Railway
• /
• v.18 no.4
• /
• pp.289-300
• /
• 2015

An important source of noise from railways is rolling noise caused by wheel and rail vibrations induced by acoustic roughness at the wheel-rail contact. In conventional approaches to predicting rail noise, the rail is regarded as placed in a free space so that the reflection from the ground is not included. However, in order to predict rail noise close to the rail, the effect of the ground should be contained in the analysis. In this study the rail noise reflected from the ground is investigated using the wavenumber domain finite element and boundary element methods. First, two rail models, one using rail attached to the rigid ground and one using rail located above rigid ground, are considered and examined to determine the rigid ground effect in terms of the radiation efficiency. From this analysis, it was found that the two models give considerably different results, so that the distance between the rail and the ground is an important factor. Second, an impedance condition was set for the ground and the effect of the ground impedance on the rail noise was evaluated for the two rail models.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2008.11a
• /
• pp.612-613
• /
• 2008

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2014.04a
• /
• pp.654-655
• /
• 2014