• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.27 no.11
• /
• pp.1856-1863
• /
• 2003

Overlay model had several advantages to describe hysteretic behavior of material and showed good capability for many engineering materials. However, this model is only applicable to material obeying Masing postulate. Some materials such as 316L stainless steel do not follow Masing postulate and show cyclic hardening(or softening) and strain range dependence. Low cycle fatigue tests of 316L stainless steel at 600$^{\circ}C$ were performed to investigate the characteristics of cyclic behavior of non-Masing material. From all tests cyclic softening was observed. There were differences in elastic limit of hysteresis loop according to applied strain range. To consider these features, modified overlay model was developed. Yield stresses of subelements were divided into isotropic and anisotropic part to describe the non-Masing behavior. The plastic strain range memorization was introduced to consider the strain range dependence. The prediction using modified overlay model showed a good accordance to actual hysteresis loops.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.10a
• /
• pp.627-631
• /
• 2005

In this study, low fatigue behavior of laser welded sheet metal were investigated. Before welding, the cross section of butt joint was prepared only by fine shearing without milling process. Specimens were same sheet metal and welding condition that using automobile manufacturing company at present. Butt joint of cold rolled sheet metal was welded by $CO_2$ laser. It is used that welding condition such as laser welding speed was 5.5m/sec and laser output power was 5kW for 0.8mm and 1.2mm sheet metal. The laser weldments were machined same or different thickness and same or different material. In order to mechanical properties of around welding zone, hardness test was performed. Hardness of welding bead is about 2 times greater than base material. We performed the low cycle fatigue tests for obtaining fatigue properties about thickness and the weld line direction of specimen. The results of strain controlled low cycle fatigue test indicate that all specimens occur cyclic softening, as indicated by the decrease in stress to reach a prescribed strain.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2008.05a
• /
• pp.455-458
• /
• 2008

단백질체학에서 2-DE는 조직내의 단백질을 규명하는 단백질 분리 기술로서 2-DE에 의하여 생성된 단백질 이미지에서 스팟 매칭을 진행하여 상이한 단백질 젤 내에 존재하는 동일한 단백질 클래스를 찾을 수 있다. 그러나 단백질 2-DE 이미지는 실험 환경의 변화에 민감하여 이미지의 위치적인 변형이나 먼지, 공기방울 등으로 인해 많은 에러 정보를 포함할 수 있다. 이러한 에러는 스팟 매칭에 치명적인 영향을 주어 낮은 정확도를 가지게 된다. 본 논문에서는 단백질 2-DE 이미지 분석을 위한 스팟 매칭에서의 정확도를 향상시키기 위하여 기준점 학습과 기준점 추출의 두 단계로 이루어진 자동화된 기준점 추출 방법을 사용하여 스팟 매칭의 정확도를 향상시킬 수 있는 최적의 기준점을 선정하는 방법을 제안하며 선정된 기준점을 기반으로 다수의 기준 이미지를 선택하여 스팟 매칭을 반복적으로 진행함으로써 확률 기반의 정확한 스팟 매칭 결과를 도출하고자 한다. 특히 데이터 마이닝 기법에서 사용되는 최소지지도 값을 적용함으로써 지지도가 높은 스팟 매칭 결과를 빈발한 스팟 매칭으로 판정한다. 제안한 스팟 매칭 정확도 향상 기법의 정확도를 평가하기 위하여 실제 단백질 2-DE 젤 이미지 데이터를 사용하여 입력 기준점의 개수와 최소 지지도의 증가에 따른 정확도의 변화를 분석하였다.

• The Journal of Engineering Geology
• /
• v.26 no.3
• /
• pp.307-314
• /
• 2016

Shear characteristics of soils can be investigated using various types of shear stress measuring apparatus. Ring shear tests are often applied for examining the residual shear strength under the unlimited deformation. This paper presents drainage-consolidation-shear velocity dependent undrained shear strengths measured in terms of water leakage. A series of ring shear tests were performed under the constant normal stress (50 kPa) and controled shear velocity ranging from 0.01~1 mm/sec under the undrained condition. As a result, undrained shear strengths are dependent on shear velocity. It exhibits that straining hardening behavior is observed for the shear velocity lower than 0.1 mm/sec; however, the strain softening behavior is observed for the shear velocity higher than 0.1 mm/sec. Water leakage can cause the increase in shear stress irrespective of shear velocity. Shear stress increases with increasing amount of water leakage. It is due to the fact that the small grains and water flow out through the rubble edge in the ring shear box. Repetitive saturation and consolidation processes may minimize the error.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.26 no.2
• /
• pp.77-83
• /
• 2020

A series of foamed plastic sheets containing biomass (as HMR container) were developed via different foaming process temperatures, and their density, porosity, WVTR, and pore morphology were evaluated. Thermal stability of samples during re-heating the food in oven, change in morphology, density, porosity, and WVTR were investigated using a simulated thermal shock process according to MIL-STD-883E assay. As such, the pore size of samples was generally increased with increasing temperature of the foaming process. It can be explained that as foaming temperature increased, the viscosity of molten resins and the repulsive force against pore expansion decreased. In addition, an increase in the thermal shock cycle reduced the pore size and WVTR, while density increased because high temperature treatment that softened the sheet matrix was followed by a low temperature incubation, which contracted the matrix, thereby changing the physical and morphological properties of samples. However, an insignificant change in density was observed and WVTR tended to be decreased, indicating that as-prepared foamed plastic sheets could be used as a high thermal stable container for HMR application. Therefore, it found that the properties of newly developed HMR containers containing biomass were dependent on the foaming process temperature. Moreover, to better understanding of these newly developed containers, further investigations dealing with foaming process temperature based on various food items and cooking conditions are needed.

• Journal of the Mineralogical Society of Korea
• /
• v.28 no.3
• /
• pp.209-220
• /
• 2015

The aim of this study was leaching valuable metal ions from mine waste rocks which were abandoned mine site using indigenous aerobic bacteria. In order to tolerate the the indigenous aerobic bacteria to the heavy metal ions they were repeatedly adapted in $CuSO_4{\cdot}5H_2O$ environment. As the repeated generation-adaptation progressed, the pH values of the growth-medium were gradually decreased. During bio-leaching experiments with indigenous aerobic bacteria raised in a heavy metal ion environment for 42 days, the pH of the leaching solution was decreased while increasing the adaptation period. The indigeous bacteria were much more active on the surface of Younhwa waste rocks which contained relatively few the chalcopyrite and Cu content than the Goseong mine waste rocks, and also the amount of Cu and Fe ions were leached more in the Younhwa sample(leaching rate of 92.79% and 55.88%, respectively) than the Goseong sample(leaching rate of 66.77% and 21.83%, respectively). Accordingly, it is confirmed that valuable metal ions can be leached from the mine waste rocks, if any indigenous bacteria which inhabits a mine environment site for a long time with heavy metal ions can be used, and these bacteria can be progressively adapted in the growth-solutions containing the target heavy metals.

• Journal of the Institute of Convergence Signal Processing
• /
• v.4 no.4
• /
• pp.73-80
• /
• 2003

In this paper, we propose a ETD-turbo code(Enhanced Time Diversity turbo code) which is a novel turbo code configuration to increase the time diversity effect and analyze the performance of ETD-turbo coded MC-CDMA system. The ETD-turbo code, which is added another interleaver to the conventional turbo code structure, is consisted. Time diversity effect of the ETD-turbo code is improved by every parity bits converted into interleaver pattern. In order to the performance of the ETD-turbo code, we conduct a computer simulation about interleaver type. And we make comparison between the performance of ETD-turbo coded MC-CDMA system and the conventional turbo coded MC-CDMA system. By the simulation results, ETD-turbo code has less BER than the conventional turbo code and time delay is decreased by reducing iteration numbers. Therefore, it is defined that the performance of ETD-turbo coded MC-CDMA system is improved than the conventional turbo coded MC-CDMA system.

• Journal of the Korea Concrete Institute
• /
• v.18 no.2 s.92
• /
• pp.177-188
• /
• 2006

Conventional nonlinear finite element analysis requires complicated modeling and analytical technique. Furthermore, it is difficult to interpret the analytical results presented as the stress-strain relationship. In the present study, a design-oriented analytical method using the truss model was developed. A reinforced concrete member to be analyzed was idealized by longitudinal, transverse, and diagonal line elements. Basically, each element was modeled as a composite element of concrete and re-bars. Simplified cyclic models for the concrete and re-bar elements were developed. RC beams and walls with various reinforcement details were analyzed by the proposed method. The inelastic strength, energy dissipation capacity, deformability, and failure mode predicted by the proposed method were compared with those of existing experiments. The results showed that the proposed model accurately predicted the strength and energy dissipation capacities, and to predict deformability of the members, the compression-softening model used for the concrete strut element must be improved.

• Computational Structural Engineering
• /
• v.9 no.1
• /
• pp.151-159
• /
• 1996

A finite element formulation based on the CFT(Compression Field Theory) concept such as the effect of compression softening in cracked concrete, and macroscopic and rotating crack models etc. was presented for the nonlinear behaviour of structural concrete. In this category, tangential or secant material stiffnesses for cracked concrete were also defined and discussed in view of the iterative solution schemes for nonlinear equations. Considering the computational efficiency and the ability of modelling the post-ultimate behaviour as major concerns, the incremental displacement solution algorithm involving initial material stiffnesses and the relaxation procedure for fast convergence was adopted and formulated in a type of 8-noded quadrilateral isoparametric elements. The analysis program NASCOM(Nonlinear Analysis of structrual Concrete by FEM : Monotonic Loading) developed baed on the CFT constitutive relationships and the incremetal solution strategy described enables the predictions of strength and deformation capacities in a full range. crack patterns and their corresponding widths, and yield extents of reinforcement. As the verfication purpose of NASCOM, the prediction of Cervenka's panel test results including the load resistance and the deformation history was made. A limited number of predictions indicate a good correlation in a general sense.

• Korean Journal of Medicinal Crop Science
• /
• v.13 no.1
• /
• pp.35-40
• /
• 2005

We analyzed six cultivars of Chinese Moutan, Paeonia suffruticosa Andrews, using HPLC for the investigation of appropriate root harvesting time and distributions of paeonol and paeoniflorin according to the seasonal changes. The contents of paeonol remained nearly constant at different harvesting times. However, the paeoniflorin contents have changed significantly during the harvesting time. These showed the increasing tendency in May, July and September. We compared the distribution of two compounds between two cultivars with different flower forms, Dan Feng and Wu Long Feng Sheng. The contents of paeonol were very low in the leaf and annual shoot. This tendency was not changed during five harvesting times. But the paeoniflorin existed abundantly in the leaf and root. The contents of paeoniflorin in the leaf were highest in May, and gradually decreased.