• Korean Journal of Construction Engineering and Management
• /
• v.25 no.1
• /
• pp.62-72
• /
• 2024

Due to the distribution structure of domestic temporary equipment, quality control of temporary equipment is essential because more than 80% of temporary equipment is repeated and reused. Due to this importance, the Ministry of Land, Infrastructure and Transport has proposed quality management standards for temporary equipment for 10types of temporary equipments, including steel pipe support, but the overall quality of temporary eqipment cannot be confirmed because the quality is managed through sampling quality tests. In addition, although quality control standards exist for temporary material rental company, practical utilization was investigated and analyzed to be very low as they are mainly presented based on qualitative inspection standards by visual inspection. Therefore, the purpose of this study is to develop individual temporary material/quality/delivery management standards (Guides) for temporary equipment rental company to preemptively secure the quality of temporary equipment before bringing them into the construction site. If the standards developed through this study are applied to domestic temporary equipment rental companies, it is expected that high-quality temporary equipment with secured quality will be brought into the construction site as the quality of temporary equipment quality of domestic medium and small temporary equipment rental companies is improved safety accidents related to temporary structures.

• Journal of the Microelectronics and Packaging Society
• /
• v.31 no.2
• /
• pp.23-27
• /
• 2024

In this study, the time-dependent warpage behavior caused by the viscoelastic properties of prepreg in a printed circuit board (PCB) was analyzed by finite element method (FEM). The accurate viscoelastic properties of the prepreg were measured by stress relaxation test, which were then incorporated into constructed warpage analysis model. When the PCB was subjected to repeated thermal cycles, the warpage of the PCB was restored to its initial state when only the elastic properties of the prepreg were considered, but when the viscoelastic properties were also considered, the warpage was not restored and permanent warpage change occurred. The warpage analysis for three different types of prepreg was conducted to compare their mechanical reliability, and the results showed that materials with elastic properties dominating over viscoelastic properties experienced less warpage, resulting in better mechanical reliability.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.18 no.4
• /
• pp.77-85
• /
• 2010

Pig slurry has been considered as environmental waste to be treated in an appropriate manner. Recently, there has been the movement toward reusing the pig slurry as an alternative fertilizer sources for agricultural lands. For instance, SCB(Slurry Composting & Biofiltration) liquid fertilizer has been developed and widely used in Korea. However, the impacts of swine slurry liquid fertilizers on both agricultural environment and crop yield have not been investigated yet. Therefore, the current study was conducted to accumulate the basic data which can be subsequently used to determine appropriate application amount of swine slurry liquid fertilizers (SCB liquid fertilizer and storage liquid fertilizer) as well as the application method for each liquid fertilizer. For this, growth of rice was cultivated under the treatment of SCB liquid fertilizer, storage liquid fertilizer, and chemical fertilizer. Also, control treatment (no fertilizer) was included for comparison and all treatments were conducted in five replication. Rice growth was good with the treatment in the order of chemical fertilizer>storage liquid fertilizer>SCB liquid fertilizer>control and likewise, the yield amount of rice straw was in the same order of rice growth. The rice yield amount appeared to be no difference among the treatment except control which showed the least yield amount. Also there was no difference in nitrogen and phosphorus concentrations in rice among the treatment except control which showed the least concentration.

• Asian Journal of Turfgrass Science
• /
• v.22 no.1
• /
• pp.65-74
• /
• 2008

Traffic management is becoming an important issue in turfgrass practise on golf course. The objective of this study was to investigate the combined impact of different traffic times and types of fertilization. Traffic treatment was applied in morning (AM), noon, and afternoon (PM). Fertilizers used include faster-release fertilizer (21-17-17) and slow-release fertilizers (12-6-18, 11-3-22, 20-3-20, 10-3-10). Experiment was conducted from Oct. 1 to Nov. 30, 2005 on a nursery putting green of Incheon Grand Golf Club. The growth and quality of creeping bentgrass (Agrostis polustris cv. 'Seaside II') were evaluated on visual leaf color, leaf texture, shoot density, and root length. The measurement at 20 days after treatment, turfgrass color and leaf texture showed the best result on 10-15-10 + Noon-traffic plot. Turf quality and traffic tolerance were not different at Am and Pm traffic treatment. However, traffic stress in early morning and late evening caused the most severe damage to the turfgrass. Shoot density was the highest in 10-15-10 + Noon-traffic treatment but root length was not different among treatments after 30 day measurement. Among the fertilizers, slow release fertilizer resulted in higher turf quality and traffic tolerance than fast release fertilizer, however, shoot density did not showed a significantly different. For the fast recuperation of turfgrass from traffic injury in the early winter, it is recommended to avoid early morning and late evening traffic such as cup replacement and other maintenance practise. It is also recommended to delay the first tee-up time and ending early for last tee time during cold weather season.

• Journal of Life Science
• /
• v.22 no.2
• /
• pp.161-166
• /
• 2012

This study was performed to investigate the feeding effects of different additives on the growth performance and carcass characteristics of Holstein steers. Twenty-four Holstein steers, five months of age and 176.6 kg, were randomly allocated to three experimental groups of eight animals each for an 18-month feeding trial. The groups were control (not additive), T1 (fed zinc, vitamin C, and sulfur), and T2 (fed choline and lysine). The average daily gain was no different between the treatment groups during the growing to early fattening period, but it was significantly higher in the T1 group than the T2 group in the late fattening period (p<0.05). The final BW of the T1 group was relatively high in relation to the other groups, but was not significantly different. The additives had no effects on DMI during the experimental period; however, the feed conversion ratio of the T1 group in the late fattening period was significantly lower than that of the T2 group (p<0.05). The results of yield traits, carcass weight, and yield index were similar between groups, but back fat thickness and rib eye area were relatively lower in the T2 group than in the other groups. In terms of quality traits, meat color, texture, and maturity were not significantly different between the three groups. However, marbling score and appearance rate of high quality grade ($1^{++}$, $1^+$, and 1) were higher in the T1 group compared with the T2 group. Thus, the present results suggest that vitamin C, zinc, and sulfur supplementation may improve the growth performance and carcass characteristics of Holstein steers.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.19 no.1
• /
• pp.41-48
• /
• 1999

This experiment was carried out to determine the effect of the silage additives on improvement of quality of fresh rice straw silage using round bale at the forage experimental field, grassland and forage crops division, National Livestock Research Institute, RDA, Suwon from 1997 to 1998. The experiment was arranged in a randomized block design with three replication. The treatments used in this study were consisted of different additives(control, formic acid, molasses, molasses+urea and inoculant). The rice straw silage with molasses+urea treatment resulted in high crude protein content and in vitro dry matter digestibility were increased with molasses of inoculant treatments compare with the control. The mean dry matter of formic acid treatment material was higher than with control but there was no significant difference in dry matter content among the additives treatments. The pH of molasses treatments significantly increased the proportion of lactic acid(P<0.05) and decreased the proportion of butyric acid. The total organic acid content of all treatments had low around 2%. Ammonia-N of molasses+urea treatment was significantly(P<0.05) higher than that of others, but formic acid or inoculant treatments was lower below 10% per total nitrogen. Over a 7d feeding period, the dry matter intake per cattle on the inoculant treatment was higher that on both the untreated round bale silage of fresh rice straw and rice straw hay. Producing cost per kilogram of round bale silage of fresh rice straw was decreased according to the increasement of harvesting area. It is suggested that application of round bale silage system to fresh rice straw with molasses or inoculant was the best treatment for improving preservation as silage, and that animal intake was enhanced by addition of inoculant to fresh rice straw.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.26 no.4
• /
• pp.227-232
• /
• 2006

This experiment was conducted to evaluate the effect of liquid manure source, application rate and time on the agronomic characteristics and forage yield of winter rye. The experimental design was a randomized complete block design. The treatments were : CFB150=chemical fertilizer(CF) 150 N as basal, CFS150=CF 150 N as split application (75+75), SLB150=swine liquid (SL) 150 N as basal, SLS150=SL 150 N as split application (75+75), SLB300=SL 300 N as basal, SLS150=SL 300 N as split application(150+150), CLB150=cattle liquid (CL) 150 N as basal, CLS150=CL 150 N as split awlication(75+75), CLB300=CL 300 N as basal, CLS150=CL 300 N as split application(150+150). Heading date of the plant was observed on the 17th of April fur both chemical fertilizer and swine liquid, and on the 16th of April for cattle liquid. Stay green of chemical fertilizer was higher than others because of high crude protein content. Leaf was darker in high nitrogen fertilizer treatments than low N treatments. However lodging resistance was poor as nitrogen fertilizer was increased. Dry matter (DM) content of rye at chemical fertilizer was lower than liquid manure. DM yield of chemical fertilizer treatments were highest among the fertilizer source. However, DM yield of rye with application was all most same at different N application methods. The crude protein (CP) content and yield for chemical fertilizer was significantly higher than liquid manure. CP yield using split application was higher by 16% and 28%, compared to basal application. Based on the results of this study, forage production of liquid manure was lower, compared to chemical fertilizer. And split application was superior to basal application forage and protein yields, and high protein.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.6 no.2
• /
• pp.111-118
• /
• 1986

Sysnthesis and accumulation pattern or nonstructural carbohydrates in orchardgrass (Dactylis glomerata L.) cv. Potomac and Baraula, perennial ryegrass (Lolium perenne L.) cv. Reveille and Semperweide and meadow fescue (Festuca pratensis Huds.) cv. Cosmos 11 and N.F.G. were studied under different meteorological environments and cutting managements. The field experiments were conducted as a split plot design with three cutting regimes of 6-7 cuts at grzing stage, 4-5 cuts at silage stage and 3 cuts at hay stage in Korea and West Germany from 1975 to 1979. The results obtained are summarized as follows: 1. Accumlation of nonstructural carbohydrates in temperate grasses was influenced by grass species and regional climatic environments. Total nonstructural carbohydrates (TNC) of orchardgrass, perennial ryegrass and meadow fescue in Korea, taken as average of all cutting regimes, were shown a value of 4.39%, 6.08% and 8.01%, respectively, while those under cool summer climatic condition in West Germany accumulated to 10.42% (orchardgrass), 18.02% (perennial ryegrass) and 12.73% (meadow fescue). 2. Nonstructural carbohydrates in orchardgrass were accumulated mainly as mono-and disaccharose, while those in perennial ryegrass resreved as fructosan. The contents of fructosan and mono-and disaccharose were 1.34% and 3.04% for orchardgrass, 3.25% and 2.83% for perenninal ryegrass, respectively. Meadow fescue had a concentration of 3.93% fructosan and 4.08% mono-and disaccharose. 3. Synthesis and accumulation of nonstructural carbohydrates in temperate grasses were negative associated with increasing of air temperature (P$\leq$ 0.1%). Under hot stress during summer season in Korea, the contents of fructosan, mono-and disaccharose were decreased to about 0.34% nd 1.28% from a value of 1.34% and 2.69% in spring season. In Freising and Braunschweig, the concentration of reserved carbohydrates was less influenced by growing season. 4. Synthesis and accumulation pattern of nonstructural carbohydrates were shown a great respons to cutting frequency of the plants. Frequent cutting system under high temperature lowered the accumulation of reserved carbohydrates, especially fructosan and also caused to decrease the plant regrowth. However, under cool temperature, it shows a less differences of tructosan, mono-and disaccharose in the plants at all cutting systems.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.6 no.2
• /
• pp.124-130
• /
• 1986

To find out the optimum split application ratios of fertilizer nitrogen and potassium in the newly opened pasture at spring, a field experiment was conducted. Two levels of nitrogen and potassium application and three split application ratios of both fertilizer were treated by split design with 4 replications. The experiment was carried out from March, 1984 to October, 1985 on the experimental field of the Livestock Experiment Station in Suweon. The results obtained are summarized as follow: 1. Total DM yield was not showed signigicant difference among split application ratios of nitrogen and potassium. 2. DM yield of grasses was 4,854 kg/ha in heavy basal application of N and $K_2$O (160 kgN: 140 kg $K_2$O/ha), it was significantly increased by 16% than of conventional dressing (80 kg N: 70 kg $K_2$O/ha). But there was almost no difference in dry matter among N and $K_2$O split application ratios. 3. Dry matter yield of legume in heavy basal dressing was decreased by 23% than that of conventional dressing. In the methods of NK application, dry matter yield of legume was tended to decrease by 3% with equal application and 9% with heavy dressing in autumn, when compared with that of heavy dressing in spring. 4. There was no significant difference in dry matter yield of native species between different basic fertilization levels, but dry matter yield of native species was decreased by 6% with equal application and more increased by 11% with heavy dressing in autumn, when compared with the yield of heavy dressing in spring. 5. In aspect of the botanical composition, the percentage distribution of grasses was increased and the ratio of legume was greatly decreased by heavy dressing at basal fertilization. Also for good maintenance of botanical composition, it is suggested that the equal split application of N and $K_2$O was desirable.

• The korean journal of orthodontics
• /
• v.29 no.6 s.77
• /
• pp.673-688
• /
• 1999

This study was conducted in order to analyze the mechanical characteristics of multiloop edgewise archwire (MEAW). The purposes were 1) to compare load deflection rate (LDR) of MEAW with that of various other arch wires in the individual interbracket span, 2) to compare the wire stiffness in the interbracket span with that in the multi-L-loop region (the span from distal border of the bracket of the lateral incisor to the mesial border of the buccal tube of the second molar), and 3) to verify the experimental results with theoretically derived formula. The single L-loops of five different horizontal lengths and multi-L-loops for the upper and lower arches were made out of .$016\times.022$ permachrome stainless steel wire. Straight segment of plain stainless steel, TMA and NiTi wire of the same dimension were prepared. The LDR was measured using Instron model 4466 with the load cell of 50N capacity at cross head speed of 1.0mm/min, and maximum deflection of 1.0mm. Five specimens were tested under each experimental condition. The wire stiffness number for each interbracket region and multi-L-loop region was calculated from the LDR and the interbracket spans. By dividing the theoretical model of multi-L-loop into 35 linear segments, the energy stored in each segment was obtained. Then the LDR and wire stiffness of single L-loop and multi-L-loop were calculated and compared. The findings were as follows : 1) The average LDR of MEAW in the individual interbracket region was 1/1.53 of that of the NiTi,1/2.47 of TMA and 1/5.16 of the plain stainless steel wire. 2) The wire stiffness of MEAW in the multi-L-loop region was 1.53 times larger than that in the interbracket region, and the LDR was almost twice as large as that of NiTi in that region. 3) According to the theoretically derived equation, the wire stiffness of the single L-loop was lower than that of multi-L-loop. The results of this study suggest that MEAW has the unique mechanical Property which could allow individual tooth movement and transmit elastic force effectively through the entire arch wire.