• Korean Journal of Poultry Science
• /
• v.38 no.4
• /
• pp.293-304
• /
• 2011

The current work was carried out to investigate the effect of crossbred Korean native chickens (KNC) on performance and meat quality. A total of 720 chicks (1d of age) was used in this work and were divided into groups by crossbreds (A, B, C and D) and sex (male and female). Crossbreds were A) (KNC egg-meat type C strains ${\times}$ KNC meat type S strains) ${\times}$ Ross broiler, B) (KNC egg-meat type C strains ${\times}$ KNC meat type H strains) ${\times}$ KNC meat type S strains, C) (KNC native R strains${\times}$KNC meat type S strains)${\times}$KNC meat type H strains and D(White Semibroiler Chickens). Experimental diets consisted of 3 phases such as starter (0~5 weeks; CP 20.0%, ME 3,050 kcal/kg), earlier (5~8 weeks; CP 18.0%, ME 3,100 kcal/kg) and finisher (8~12 weeks; CP 16.0%, ME 3,150 kcal/kg). They were fed the broiler diets for 12 weeks at the flat house and thirty six chickens were slaughtered at week 5 and 10. There was no significant difference on the fertility of crossbred KNCs, and the hatchability of B crossbred was low compared to other crossbreds. On body weight (BW), D crossbred resulted in a higher BW after 5 weeks (P<0.05). Body weight gain (BWG) and feed intake (FI) of A crossbred were also significant higher compared to the other crossbreds for all periods. On carcass ratio (CR), A crossbred showed higher CR at 5 weeks, there was no significant among crossbreds at 10 weeks. The partial meat ratio(ala, breast, neck, leg) of C crossbred was the lowest among other crossbreds (P<0.05), but the back meat ratio was not difference among treatments at 5 and 10 weeks. pH of meats have no difference among crossbreds at 5 week, and A crossbred was high compared to other crossbreds at 10 week (P<0.05). The moisture content of D crossbred meat and the protein content of B crossbred meat were high compared to other crossbreds at 5 week. Chemical compositions of meats have no difference among crossbreds at 10 week. Lightness and redness have not significance among crossbreds at 5 week, and redness of A crossbred was the highest among all crossbreds (P<0.05). Shear force and cooking loss of A crossbred were high at 5 week, and cooking loss of A crossbred was low compared with other crossbreds at 10 week. These results suggested the basic data that needed to develope the new strains.

• Journal of the Korea Concrete Institute
• /
• v.14 no.5
• /
• pp.734-741
• /
• 2002

An experimental study was carried out for beam-column joints composed of RC column and RS beams. The purpose of this study is to examine the inelastic seismic behavior for the RC-RS connection. Two interior and one exterior beam-column assemblies with variable moment ratios were tested. Experimental results showed that strength and deformability except stiffness were satisfactory. It is considered that the lack of stiffness was due to the slipping of steel beam from RS beam. The behavioral characteristics of the RC-RS connection were evaluated according to the quideline suggested by Hawkins et al. Nominal strength at 5 ％ joint distortion was not satisfactory, but all the other requirements, such as strength preserving capability, energy dissipation, and initial stiffness and strength ratios after peak load were satisfactory compared with the guideline. Thus it was concluded that the RC-RS connections can maintain ductility with excellent energy-dissipating capacity if being provided with appropriate reinforced structural system such as RC core wall for the initial lateral stiffness.

• Journal of the Korean Wood Science and Technology
• /
• v.45 no.5
• /
• pp.535-543
• /
• 2017

For column-beam gussets of wooden structures, slit-processed members inserted with a steel plate are used in general. In this study, a rigid portal frame bonded with a joint was fabricated and a semi-rigid portal frame was fabricated by making a wooden gusset, a replacement for steel plate, of which a half was integrated into the column member and the other half was joined with the beam member by drift-pins. The lateral strength performance of the wooden portal frame was compared with that of the steel plate-inserted joint portal frame. The lateral strength performance was evaluated through a perfect elasto-plasticity model analysis, sectional stiffness change rate, and short-term permissible shear strength. As a result of the experiment, the maximum strength of the rigid portal frame was lower than that of the steel plate-inserted joint portal frame. The yield strength and ultimate strength were calculated as 0.58 and 0.48, respectively, but the measurements of initial stiffness and cumulative ductility improved by 1.35 and 1.1, respectively. As a result of the perfect elasto-plasticity model analysis of the semi-rigid portal frame, the maximum strength was lower than that of the rigid portal frame, but the toughness after failure was excellent. Thus, the ultimate strength was higher by 1.05~1.07. The steel plate-inserted portal frame showed rapid decrease in stiffness with the progress of repeated tests, but the stiffness of the portal frames with a wooden joint decreased slowly.

• The Journal of Engineering Geology
• /
• v.17 no.3
• /
• pp.359-365
• /
• 2007

Freezing and thawing cycle is one of the major weathering-induced factors in the mechanical weathering of the rock mass. This natural process accelerates rock weathering process by breaking down the parent rock materials and makes soil or weathered rock formation in a rock slope surface zone. It can also cause reduction of the shear strength in slopes. It is important to calculate the deterioration depth caused by freezing-thawing for a slope stability analysis. In this study, deterioration depths of rock slope due to freezing-thawing were calculated using the 1-D heat conductivity equation. The temperature distribution analysis was also carried out using collected temperature distribution data for last five years of several major cities in Korea. The analysis was performed based on the distributed rock types in study areas. Thermal conductivities, specific heats and densities of the calculation rocks are tested in the laboratory. They are thermal properties of rocks as input parameters for calculating deterioration depths. Finally, the paper is showing the calculated deterioration depths of each rock type slopes in several major cities of Korea.

• Korean Journal of Poultry Science
• /
• v.36 no.1
• /
• pp.57-67
• /
• 2009

These studies were conducted to investigate the various dietary CP and ME feeding effect on productivity, blood composition and meat quality in cross bred chicks. Seven hundred twenty one day old cross bred chicks (Hanhyup Samho) were alloted to the floor pen for early starting (0~2 weeks), starting (3~5 weeks), growing (6~8 weeks), finishing period (9~10 weeks). Dietary ME and CP were 3,000, 3,100 kcal/kg, and 22% for early starting period, 19, 20, 21% for starting period, 18, 19, 20% for growing period, 17, 18, 19% for finishing period. Weight gain and feed consumption were weekly measured and feed conversion ratios were calculated. Blood and breast meat were collected at the end of experiment. Birds fed ME 3,100 kcal/kg diets improved significantly compared with others for the first two weeks (P<0.05). Feed conversion was statistically improved in CP (22)21% treatment relative to that of CP (22)20% from three to five weeks of age. No difference were found from 6 to 8 weeks of age. Weight gain and feed conversion also improved in ME 3,100 kcal/kg treatments, but feed intake decreased significantly in CP ($22{\times}21{\times}20$)19% treatment for the rest of experimental period (P<0.05). There was interaction between ME and CP for the first five weeks (P<0.05). Blood total protein showed higher in ME 3,100 kcal/kcal treatment than ME 3,000 kcal/kg (P<0.05). There were no differences in albumin, total cholesterol and glucose, but CP ($22{\times}20{\times}19$)18 treatment showed higher glucose than other treatments (P<0.05). Cooking loss, tenderness and water holding capacity were not different. However, pH was dependent on dietary ME, CP and existing the interaction between ME and CP treatments (P<0.05). As the results of this experiment, ME and CP were confirmed the 3,000 kcal/kg, 22% for the first two weeks 3,100 kcal/kg, 21% from three to five weeks of age, 3,100 kcal/kg, 18% for the growing period, 3,100 kcal/kg, 17% for the rest of period. However, further research would be required to confirm more optimum dietary nutrition for cross bred chicks.

• The Journal of Korean Academy of Prosthodontics
• /
• v.52 no.2
• /
• pp.82-89
• /
• 2014

Purpose: The purpose of this study was to observe the change of viscoelastic properties of dental resin cements during polymerization. Materials and methods: Six commercially available resin cement materials (Clearfil SA luting, Panavia F 2.0, Zirconite, Variolink N, RelyX Unicem clicker, RelyX U200) were investigated in this study. A dynamic oscillation-time sweep test was performed with AR1500 stress controlled rheometer at $32^{\circ}C$. The changes in shear storage modulus (G'), shear loss modulus (G"), loss tangent (tan ${\delta}$) and displacement were measured for twenty minutes and repeated three times for each material. The data were analyzed using one-way ANOVA and Tukey's post hoc test (${\alpha}$=0.05). Results: After mixing, all materials demonstrated an increase in G' with time, reaching the plateau in the end. RelyX U200 demonstrated the highest G' value, while RelyX Unicem (clicker type) and Variolink N demonstrated the lowest G' value at the end of experimental time. Tan ${\delta}$was maintained at some level and reached the zero at the starting point where G' began to increase. The tan ${\delta}$and displacement of the tested materials showed similar pattern in the graph within change of time. The displacement of all 6 materials approached to zero within 6 minutes. Conclusion: Compared to other resin cements used in this study, RelyX U200 maintained plastic property for a longer period of time. When it completed the curing process, RelyX U200 had the highest stiffness. It is convenient for clinicians to cement multiple units of dental prostheses simultaneously.

• Korean Journal of Poultry Science
• /
• v.47 no.3
• /
• pp.159-167
• /
• 2020

This study investigated the effect of different light sources in the poultry house on performance, meat quality, and blood composition of finishing broilers. Two hundred and forty male broilers (1-day-old, 42.2±0.1 g) were divided into three groups and subjected to different light source treatments (incandescent, LED, and fluorescent lamps) from 3 weeks of age (four replications/treatment, 20 birds/replication). After breeding for 6 weeks, the carcass yield and meat quality of broilers with similar body weight (BW; 3.4±0.07 kg) were investigated, and blood components were analyzed. Corn-soybean meal-based feed was provided as starter (CP 22.5%, ME 3,020 kcal/kg), early (CP 18.5%, ME 3,050 kcal/kg), and finishing (CP 18%, ME 3,100 kcal/kg). Performance, carcass yield, meat quality, and blood components were evaluated. BW, BW gain, feed intake, and feed conversion ratio did not show any significant differences among treatments. There was no significant difference on live weight and carcass yield among treatments. There was no significant difference on meat color, shear force, and water holding capacity; however, cooking loss at 17.2% was the highest in the LED treatment (P<0.05). There was no significant difference on blood components except for glucose (blood biochemistry component) among treatments. Glucose was 234.5 mg/dL, 256.9 mg/dL, and 250.1 mg/dL in the three treatments, respectively, with a significant difference between incandescent and LED treatments (P<0.05). These results are used useful as basic data for investigating the effect of lighting in broilers production.

• Korean Journal of Poultry Science
• /
• v.50 no.4
• /
• pp.325-336
• /
• 2023

This study used leaves and stems of 'Tongchaeru', one of the sweet potato varieties, to investigate broiler productivity, meat quality, blood properties, growth hormones, and immune factor levels according to drying method and amount added to feed. For this experiment, a total of 720 1-day-old male Ross 308 broilers were used. Treatments were assigned with 3 replicates per treatment and 20 birds were assigned to each replicate. The treatment group was designed into 12 treatments according to the type of natural product (leaves (L), stems (S)), drying type (natural (N), hot air (H), freeze (F)) and amount added (0.1%, 0.3%). The test was conducted for a total of 5 weeks. In this study, there was no significant difference in productivity depending on the type and amount of additives added (P>0.05). The FS 0.3% group showed high pH and WHC levels, and the shear force was lowest at HL 0.1% group (P<0.05). Blood cell and serum biochemical components were similar in all treatments, and growth hormone IGF-1 was highest in FS 0.1% group (P<0.05). There was no significant difference in IFN-γ, but the highest level of IL-6 was seen in the HS 0.1% group (P<0.05). In conclusion, the meat quality and the level of growth hormone and immune factors in the body were different depending on the type and amount of dried leaves and stems of sweet potato 'Tongchaeru', further study is needed to compare the selected additives and amounts added with those without additions.

• Korean Journal of Poultry Science
• /
• v.40 no.2
• /
• pp.121-127
• /
• 2013

This work was carried to evaluate production efficiency factor, carcass yield and meat quality with weeks of Large-type Korean native ducks. Korean native ducks (n = 90) from National Institute of Animal Science (RDA, Korea) were used in this work. Ninety ducks were divided into 6 groups (15 birds/group) and were fed with meat-type duck diets for 8 wk old. When ducks grew at specific wk (6, 7 and 8 weeks), 2 ducks per group were slaughtered at 6, 7 and 8 wk old. Production efficiency factor, carcass yield, partial meat and meat quality were researched in this work. There was no significant difference on livability with weeks, but body weight at 7 and 8 wk old was higher than that at 6 wk old (P<0.05). Feed conversion ratio at 6, 7 and 8 wk old were 2.25, 2.69 and 3.21, respectively, so there was significant difference with weeks (P<0.05). Production efficiency factor at 6, 7 and 8 wk old were 256.6, 199.8 and 153.0, respectively, so there was significant difference with weeks (P<0.05). Carcass yield at 8 wk old was higher than that at 6 and 7 wk old as 73.5% (P<0.05). Lightness at 6, 7 and 8 wk were 41.8, 39.0 and 38.1, respectively, and that at 6 wk old was the higher than other weeks (P<0.05). There was no significant difference on redness at 6, 7, and 8 wk old (P>0.05) and yellowness at 8 wk old was higher compared to other weeks (P<0.05). Cooking loss was the highest at 6 wk old as 31.6%, but water holding capacity was the highest at 8 wk old (P<0.05). There was no significant difference on shear force among weeks. pH at 6 wk old was the lower than that of other weeks as 5.84. Moisture content significantly decreased with weeks (P<0.05) and fat content at 8 wk was the highest as 1.88% (P<0.05). Protein content significantly increased with weeks until 20.9% at the age of 8 wk (P<0.05). Ash content at 7 and 8 wk old was the higher than that at 6 wk old (P<0.05). There was no significant difference on juiciness, tenderness, and flavor with weeks. Finally, these results may provide that shipping time at 7 wk old preferred to that at 6 and 7 wk old, but further research was needed because of deficiency of data.

• Journal of Animal Science and Technology
• /
• v.47 no.5
• /
• pp.721-730
• /
• 2005

Effects of levels of Bomboo Vinegar Liquids(BVL) on growth performance, serum profile and meat quality in employing 90 pigs were investigated. Ninety pigs were allocated into 3 groups and fed by dietary levels of BVL 0(control), 2.0 and 4.0% were included in experimental diets of each of the groups. Concentrated diet was supplemented with 2.0 and 4.0% BVL. The results showed that the daily weight gains and the feed conversion increased significantly(p<0.05) in 2.0% BVL and the feed intake increased slightly. The glucose and the cholesterol contents at the serum decreased significantly(p<0.05) in 2.0 and 4.0% BVL. On the other hand the total protein concentration and the blood urea nitrogen(BUN) increased significantly(p<0.05) in 4.0% BVL. The carcass weight increased significantly(p<0.05) in 4.0% BVL, and back fat thickness had decreased significantly(p<0.05) in 2.0 and 4.0% BVL. The carcass grade tended to increase in 2.0 and 4.0% BVL. The total fat content of loin tended to increase in 2.0 and 4.0% BVL while the cholesterol content decreased significantly(p<0.05). The pH had lower slightly in 2.0 and 4.0% BVL, the lightness and the yellowness of the meat color had higher significantly(p<0.05) while the redness decreased. Shear force values had lower significantly(p<0.05) in 2.0 and 4.0% BVL. For the fatty acid composition, the saturated fatty acids decreased significantly(p<0.05) in 2.0 and 4.0% BVL while unsaturated fatty acids(oleic acid and linoleic acid) increased significantly(p<0.05). For the sensory evaluation, 2.0 and 4.0% BVL had a significant(p<0.05) effect of diminishing the odor and improving the appearance. The taste was also significantly(p<0.05) improved. In conclusion the 2.0% BVL had a positive effect on the feeding performance, the carcass grade and the meat quality characteristics therefore 2.0% BVL is the appropriate supplemental levels of BVL for finishing pigs.