• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2005.11a
• /
• pp.111-114
• /
• 2005

This paper presents a comparison of experimental value by hemispherical grounding simulation system and calculated value by CDEGS program for ground potential rise of structure. When a test current flowed through structure grounding electrodes, ground potential rise was measured and analyzed for types of structure using the hemispherical grounding simulation system in real time, and was computed by means of CDEGS program. The model structures were designed and fabricated with two types on a scale of one-one hundred sixty. When the experimental data were compared with the theoretical values, the similar profile was shown. Therefore, the confidence of measurement was obtained. The distributions of ground surface potential are dependent on the resistivity and absorption percentage in concrete attached to structure.

• Journal of the Korean Society of Visualization
• /
• v.21 no.2
• /
• pp.91-101
• /
• 2023

In this study, we investigated how the performance of a Venturi changes when a hemispherical bump is applied to the divergent part of the Venturi tube and what causes the performance difference. The Venturi-tunnel experiment was conducted in the Reynolds number range of 0.2 × 10⁵ - 1.2 × 10⁵ and cavitation number range of 0.9 - 10. The bump was found to reduce the pressure loss coefficient and increase the discharge coefficient by shortening the cavitation length. The decrease in the cavitation length by the bump was explained by the strengthening of the re-entrant jet. The wake generated from the hemispherical bump seems to increase the adverse pressure gradient on the Venturi surface, thereby strengthening the re-entrant jet.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2015.08a
• /
• pp.254-254
• /
• 2015

가시광선에 대해 선택적으로 투과할 수 있는 스마트 윈도우를 제작하기 위해 우리는 전기 에너지를 이용하여 유리의 색을 조절할 필요가 있다. 특히 환원되면서 가시광선 파장의 흡광도를 증폭시켜 색을 변화시키는 무기물질들이 존재하는데, 이러한 특성을 가진 균일한 박막을 만들 경우 그 표면적을 달리 하는 것이 중요하다. 이번 연구에서 우리는 Polystyrene 단일층을 만들어 WOx의 나노구조체 template를 만드는 연구를 진행하였다. 먼저, WOx nanorod 졸을 ITO 위에 스핀코팅 기법을 이용하여 도포시키고, 이후 단일 크기의 PS beads를 monolayer로 올렸다. 이 때의 PS beads의 크기는 400 ~ 1800nm의 크기를 이용하였다. 만들어진 monolayer에 다시 WOx sol을 도포시켜 반구형의 template를 갖는 WOx를 제작하였다. 우리는 이러한 방식으로 만들어진 Tungsten oxide 나노 구조체의 전기변색 특성이 어떻게 달라지는지 확인했다. 결정형 분석을 위해 XRD를 분석했고 투과도와 표면상을 보기 위해 UV-visible과 FE-SEM을 이용하였으며 마지막으로 Cyclic Voltametry를 이용해 전기변색특성 변화를 알아보았다.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.28 no.8 s.227
• /
• pp.1087-1092
• /
• 2004

Adhesion and friction forces influence adversely on performance and durability of MEMS. It has been reported that the adhesion and friction forces can be reduced with the introduction of micro surface bumps into the contacting interfaces. In this study experiments were conducted to investigate comparatively the effect of hemispherical and torus micro bumps on the adhesion and friction forces. It is confirmed that micro bumps reduce the adhesion and friction forces, and their effect is more pronounced with the bumps of smaller outer boundary radius. Moreover, the results shows that the torus bumps exhibit more rapid decrease of the adhesion and friction forces with the decrease in the outer boundary radius of bump than the hemispherical bumps. When the magnitude of adhesion force is same, the torus bumps generate smaller friction force than the hemispherical bumps. The usage of hemispherical and torus bumps to reduce the adhesion and friction forces in MEMS is discussed.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.13 no.3
• /
• pp.235-240
• /
• 2007

Recently, energy saving buildings are interested in many parts and many types of thermal insulating materials have been developed. The temperature and brightness of inside and outside building are influenced by weather change and sun's brightness and location. The location of building considering the natural daylight is an important parameter to build a building. To modeling the natural daylight, we used 342 electric bulbs which mean artificial daylight. All these bulbs are installed on dome shape frame. Especially it is focused on the luminosity control of each bulb in this paper. The luminosity of bulbs is controlled by phase control using several PIC microprocessors and triacs.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.5 no.1
• /
• pp.59-71
• /
• 2003

The purpose of this study is to provide for the basic data useful to the development of a quality brassiere featuring a good wearing feeling and an effect of reinstating and correcting breast shape. For this purpose, 220 adult women aged between 20 and 59 were sampled to survey their perceived and actual breast shapes. The results of this study can be summarized as follows; 1. Most adult women correctly perceive the changes of their breast shapes as they become older. However, the younger women tend to evaluate their breast as larger than their actual sizes, being more dissatisfied with their breast shapes than older women, while wanting their constitution to be more high and slim. In short, there is a little difference between their perceived and actual breast shapes. 2. The breast shape perceived most by the adult women is "droopy type I"(37.7%), followed by "conical type"(21.8%), "flat type"(16.8%), "semi-circular"(10.8%), "droopy type II"(8.6%) and "extruded type"(5.0%) in their order. The younger women tend to perceive their breasts as "flat", "conical" or "semi-circular", while the older women tend to perceive their breasts as "droopy". 3. According to the increase of age, the items of height were decreased and items of width, depth, circumference and length were increased, being obser and breast point were drooped. so volume and bottom area of breast of 40ㆍ50's women's age group were larger than 20?30's women's age group and breast point width of 40ㆍ50's women was being wider by increase of interior dimensions of breast.

• Research in Plant Disease
• /
• v.17 no.1
• /
• pp.78-81
• /
• 2011

Soft rot caused by Rhizopus oryzae occurred on unshiu orange (Citrus unshiu Marc.) sampled from commercial markets in Jinju, Korea, 2010. The first symptom of soft rot on orange is a water-soaked appearance of the affected tissue. The infected parts later disintegrated into a mushy mass of disorganized cells followed by rapid softening of the diseased tissue. The lesion on orange was rapidly softened and rotted, then became brown or dark brown. Optimum temperature for mycelial growth of the causal fungus on potato dextrose agar was $30^{\circ}C$ and growth was still apparent at $37^{\circ}C$. Sporangiophores were $6{\sim}20\;{\mu}m$ in diameter. Sporangia were globose and $40{\sim}200\;{\mu}m$ in size. The color of sporangia was brownish-grey to blackish-grey at maturity. Sporangiospores were sub-globose, brownish- black streaked and $4{\sim}10\;{\mu}m$ in size. Columella were globose to sub-globose and $85{\sim}120\;{\mu}m$ in size. On the basis of mycological characteristics, pathogenicity test, and the ITS sequence analysis, the causal fungus was identified as Rhizopus oryzae. To our knowledge, this is the first report of soft rot caused by R. oryzae on unshiu orange in Korea.

• The Korean Journal of Mycology
• /
• v.40 no.1
• /
• pp.65-68
• /
• 2012

In July and August 2011, a disease suspected to be Rhizopus soft rot was observed on peach (Prunus persica var. vulgaris) at the Wholesale Market for Agricultural Products, Jinju, Korea. The first symptom of soft rot on peach is a water-soaked appearance of the affected tissue. The infected parts later disintegrated into a mushy mass of disorganized cells followed by rapid softening of the diseased tissue. The lesion on peach was rapidly softened and rotted, then became brown or dark brown. Optimum temperature for mycelial growth of the causal fungus on PDA was $30^{\circ}C$and growth was still apparent at $37^{\circ}C$Sporangiophores were 6~20 ${\mu}m$ in diameter. Sporangia were globose and 35~200 ${\mu}m$ in size. The color of sporangia was brownish-grey to blackish-grey at maturity. Sporangiospores were sub-globose, brownish- black streaked and 5~10 ${\mu}m$ in size. Columella were globose to sub-globose and 85~120 ${\mu}m$ in size. On the basis of mycological characteristics, pathogenicity test, and molecular identification, the causal fungus was identified as Rhizopus oryzae Went & Prinsen Geerligs. To our knowledge, this is the first report of soft rot caused by R. oryzae on peach in Korea.

• Research in Plant Disease
• /
• v.13 no.1
• /
• pp.57-60
• /
• 2007

A rhizopus soft rot caused by Rhizopus stolonifer occurred sporadically on grape in orchard in Gyeongsang-nam-do Agricultural Research and Extension Services and in Wholesale Market of Agricultural Products in Jinju city. The infected fruits were rapidly water-soaked, softened and eventually rotted, and the symptoms were initiated from wounds or cracks occurred at harvest time. Sporangiophores were $850{\sim}1,800{\mu}m$ in length and $12{\sim}23{\mu}m$ in width. Sporangia were globose or hemispheric and $80{\sim}190{\mu}m$ in size. The color of sporangia was white and cottony at first and gradually to brownish black, bearing abundant spores when it matured. Columella were hemispheric and $70{\sim}95{\mu}m$ in size. Sporangiospores were irregular round or oval, brownish-black streaked and $8{\sim}22{\times}6{\sim}10{\mu}m$ in size. The optimum temperature for mycelial growth of the fungus on PDA was 25$^{\circ}C$. On the basis of mycological characteristics and pathogenicity to grape (Vitis vinifera), the causal fungus was identified as Rhizopus stolonifer (Ehrenberg ex. Fr,) Lind. This is the first report of Rhizopus soft rot by R. stolonifer on grape (V. vinifera) in Korea.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.18 no.5
• /
• pp.96-106
• /
• 2014

The increased vibration level of the railway bridge could make significant noise and, also, cause structural damages such as fatigue cracks. Related to these subjects, a spherical elastomeric bridge bearing, which is layered by hemispherical rubber and steel plates, was investigated in terms of its vibration performance. Several different shape factors could be considered by changing the curvature of hemispherical surface and size in rubber and steel plate thicknesses in the manufacturing stage. The performance of the spherical elastomeric bearing for the reduction in vibration was compared with that of the conventional bearing by performing vibration experiments on a scale-downed model. The rubber material characteristics and spherical shape are found to be important parameters in reducing the bridge vibration.