• Journal of Korean Society of Transportation
• /
• v.22 no.5
• /
• pp.35-45
• /
• 2004

This paper analyzes the differences in the service quality priorities of air cargo service providers and customers. After having identified what constitutes the decisive factors with regards to air cargo service quslity, research was carried out to evaluate the differences in the service quality priorities of air cargo service providers and customers. Moreover, this paper analyzes these differences by separating air cargo service providers into Korean and international air cargo service providers. In order to attain the objectives of this research, the air cargo service sectors were divided into three general categories: supply capability(H/W), service accountability, and competitiveness of service fees and management capability(S/W). The researchers then placed 6 different criteria into each service category, for a total of 18. The evaluation of the service quality priorities of air cargo service providers and customers revealed very little difference between these two groups. With regards to the service criteria found in each service category, our research found marked differences between the service quality priorities of providers and customers in only three of the 18 criteria. However, we found marked differences in service quality priorities in 7 of the 18 criteria when the air cargo service providers were divided into Korean and international air cargo providers. While domestic air cargo service providers evaluated management's capability to handle cargo accidents and incidents as the most important priority, international air cargo service providers placed the highest priority on the cargo rate system. The results of this research imply that in order to properly evaluate the differences between the service quality priorities of air cargo service providers and customers, the air cargo service providers itself should be separated between the Korean air cargo service providers and the foreign providers because of their respective inherent perception on service quality.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.38 no.8
• /
• pp.34-42
• /
• 2001

The 1${\times}$2, 1${\times}$4 and 1${\times}$8 multimode interference(MMI) optical power splitters are fabricated by using $Ag^+-Na^+$ ion exchange on BK7 glass. Before fabricating the MMI optical power splitters, we find the refractive index of the channel waveguide and calculate the multimode section length and width. The multimode section lengths and widths are 887${\mu}m$, 1666${\mu}m$ and 1834${\mu}m$ and 40${\mu}m$, 80${\mu}m$ and 120${\mu}m$ for 1${\times}$2, 1${\times}$4 and 1${\times}$8 MMI optical power splitters respectively. The measured properties of the fabricated MMI optical power splitters show that the unbalance ratios of the 1${\times}$2, 1${\times}$4 and 1${\times}$8 MMI optical power splitters are 1.4[dB], 1.7[dB] and 2.0[dB] and the excess losses of those sre 0.96[dB], 2.26[dB] and 1.67[dB]. respectively.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.7 no.1
• /
• pp.153-160
• /
• 1969

Experiments on sweet sorghum(sorgo) with different population per unit area were conducted from 1966 to 1968 for the first time in Korea. By increasing plant population stalk weight, refinable sugar and seed weight per plot were increased, but stalk weight per plant, brix percentage, sugar content, stem diameter and 1, 000 seed weight were decreased. Plant height, maturity and lodging were not affected by the treatments. The result obtained has suggested that the effects of plant spacing within row on the characteristics of plant growth and on yields were greater than those of row width. Negative correlations existed between sugar content and sugar yield, and seed weight per plant and seed yield. The optimal plant population in this study ranged from 16, 700 to 22, 200 plants per 10a, row width of 60cm and plant spacing in row of 15 to 20cm resulted in the highest sugar and seed.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.26 no.3
• /
• pp.486-491
• /
• 1999

Hypoparathyroidism has abnormally decreased secretion of parathyroid hormon which responds to the blood calcium level. Wherease, Pseudohypoparathyroidism has normal activity of thyroid hormon, but end-organs, such as urinary tract and osteoclast, do not respond to parathyroid hormon. The cause of this disease is due to the mutation of Guanine stimulating(Gs) protein regulating Gs gene, which is the receptor to this hormon. Pseudohypoparathyroidism is usually noted before 20 years old on average of 8-9 years old. The clinical features of this disease includes delayed growth and development, round face, obesity, soft tissue calcification, ectopic ossification, shortening of metacarpals and metatarsals by epiphyseal closure in advance of age. The mutation of Gs gene which are found in brain, endocrine organs, and chondrocytes is the cause of those features. Reaction to Glucagon, gonadal hormon, and thyroid stimulating hormon is not expected in both cases. The common dental manifestations include enamel hypoplasia, delayed eruption, agenesis of tooth, hypodontia, dysplastic short roots, widened pulpal space, microdontia, intrapulpal calcification, and malocclusion are also often reported. This case which is diagnosed to Pseudohypoparathyroidism showed short and under-developed root of permanent troth, delayed eruption, and non-eruption of premolars and molars. And morphogenesis imperfecta of first and second premolars were also found.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.18 no.2
• /
• pp.16-27
• /
• 2015

The parcels of land alteration by existing manual work was very inefficient in terms of time and costs. Especially it caused many difficulty in estimating compensation since the work didn't take into account the range of adjoining zone to road. This study selected Gimje City of Jeollabuk-Do as a study site and could analyze the numbers and areas of parcels of land alteration considering the range of adjoining zone to road based on cadastral maps and wide road layers from new address system. Also this study applied a fuzzy membership function according to occupation ratio to road, and analyzed compensation by the range of adjoining zone to road using individual public land price information of the parcels for land alternation. Especially, the change aspect of public and private parcels could be investigated by the range of adjoining zone to road according to the fuzzy membership function. And this study could provide very efficient data in determining the priority of the parcels for land alternation through calculating compensation of the parcels for land alternation by Eup Myeong Dong according to the range of adjoining zone to road.

• Journal of the Korean GEO-environmental Society
• /
• v.14 no.11
• /
• pp.65-71
• /
• 2013

Despite of the various merits of soil pavement, it has not been widely adapted because portland cement was conventionally used as soil stabilizer to improve the mechanical properties such strength parameters. Recently, natural soil stabilizer(NSS) were developed and virtually adopted to several case of soil pavement construction under control of heavy metal pollution compared to cement-used cases. However, the application of natural soil stabilizer is not settled yet, and empirical design have been widely adopted. In this study, therefore, the strength parameter of soil-NSS mixture was estimated by some triaxial compression tests, CU-test. From the tests, the relationship between curing period and strength parameter such as internal friction and effective cohesion was examined. As a result, effective cohesion of dredged clay and granite soil increased as curing time is increased. However, internal friction is almost same result in all soil type used in this study.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.6 no.1
• /
• pp.25-35
• /
• 2018

This study presents microstructural characteristics and strength properties of alkali-activated kaolin(K)-fly ash(FA) blends binders. The compressive strength, X-ray diffraction(XRD), thermogravimetric(TG) analysis and SEM/EDS were measured for hardened samples. The results were shown that all the samples had developed the compressive strength over time, regardless of replacement levels of K. It was found that when the amount of K increased, the strengths of samples decreased. In XRD result, no new crystalline phases were observed in all the hardened samples other than the crystalline components of raw FA and K, whereas TG analysis showed that N-A-S-H gel was formed as a reaction product in all the samples. Samples did not have the typical microstructure of dense, and there is little significant difference between the microstructures of the samples despite the differences in the strength testing results with replacement ratios of K. This study showed that the strength of sample was larger for lower Si/Al ratio of reaction product formed in sample. According to the correlation between Si/Al ratio and strength in this study, it is expected that if a chemical additive is used for lowering the Si/Al ratio of reaction product(i.e., increasing the $Al_2O_3$ solubility) in alkali-activated K-FA blends binders, strength improvement in K-FA blends binders could be achieved.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.36 no.1
• /
• pp.41-47
• /
• 2020

Purpose: The purpose of this study was to evaluate the flexural strength and reliability of highly translucent colored zirconia for all ceramic restoration. Materials and Methods: Bar-shaped specimens (25 × 4 × 2.5 mm) were prepared from highly translucent monolithic zirconia. Three experimental groups were set up according to color (shade A0, A1, and A3). For each group, 20 specimens were prepared. Flexural strength was determined using a 3-point flexural test and results were analyzed with one-way ANOVA test. Weibull statistical analysis provided 2 parameter estimates: Weibull modulus and characteristic strength. X-ray diffraction (XRD) analysis was performed. Results: There was statistically significant difference between uncolored (Shade A0) and colored (shade A1 and A3) (P < 0.05), but there was no difference between colored groups (P > 0.05). The uncolored group had higher reliability compared with colored study groups. On x-ray diffraction analysis of each group, typical peaks of tetragonal phase appeared in all groups. Conclusion: Within the limitations of this in vitro study, coloring highly translucent zirconia had significant effect on flexural strength and reliability. Therefore, clinicians should be careful when using highly translucent colored zirconia to prevent breakage of veneering ceramic and enhance aesthetics.

• Journal of Korea Spatial Information System Society
• /
• v.11 no.1
• /
• pp.63-70
• /
• 2009

3D GIS(Geographic Information System) processes, analyzes and presents various real-world 3D phenomena by building 3D spatial information of real-world terrain, facilities, etc., and working with visualization technique such as VR(Virtual Reality). It can be applied to such areas as urban management system, traffic information system, environment management system, disaster management system, ocean management system, etc,. In this paper, we propose video visualization technology based on 3D geographic information to provide effectively real-time information in 3D geographic information system and also present methods for establishing 3D building information data. The proposed video visualization system can provide real-time video information based on 3D geographic information by projecting real-time video stream from network video camera onto 3D geographic objects and applying texture-mapping of video frames onto terrain, facilities, etc.. In this paper, we developed sem i-automatic DBM(Digital Building Model) building technique using both aerial im age and LiDAR data for 3D Projective Texture Mapping. 3D geographic information system currently provide static visualization information and the proposed method can replace previous static visualization information with real video information. The proposed method can be used in location-based decision-making system by providing real-time visualization information, and moreover, it can be used to provide intelligent context-aware service based on geographic information.

• Journal of Gifted/Talented Education
• /
• v.25 no.2
• /
• pp.217-236
• /
• 2015

The purpose of this study was to investigate factors that affected achievement of socially succeeded people, and to draw ways to improve gifted education. To do this, we interviewed 60 achievers. The interview was administrated as semi-structured deep interview about 6 areas - education, major, family and parent, personal relationship, leisure time activity, achievement and motivation of success. The results showed that achievers were active students during their school days. They thought differentiated education and student-centered lessons are important. Many achievers answered they do not have any personal mentee, and decision of majors and education should be matched with the perception of one's potential and interest. Exercises, music, and reading books were strongly suggested as leisure time activities, and the key inner factors for success were curiosity and self-confidence. Beneficiaries of gifted education perceived their experience of gifted education had a positive influence on their achievement. Based on the these results, ways to improve gifted education were discussed.