• 한국화재조사학회지
• /
• 제11권1호
• /
• pp.29-62
• /
• 2007

본 연구는 국내의 가정에서 가장 많이 사용되고 있는 1조식전자동세탁기(이하 기기라 함)의 발화위험요소 중, 그 내부에 부속된 세탁조의 하부측을 경유하며 배선되는 전선(이하 하부배선이라 함)의 발화형태와 성상(性狀)을 조명하므로서, 예방대안과 원인조사의 요령을 구체적으로 제시하고자 하였다.

• 한국항공우주학회지
• /
• 제45권1호
• /
• pp.79-84
• /
• 2017

본 연구는 미래 성장산업으로 각광을 받고 있는 무인비행장치 교육훈련 및 조종자격증명제도 개선방안을 항공선진국의 사례와 전문가 인터뷰를 통하여 제시하였다. 개선방안으로 무인비행장치 조종사에 대한 명확한 개념의 정립, 무인비행장치 자격증명 및 자격증명 유지를 위한 제도시행, 자격증명 취득을 위한 표준교재 개발과 보급, 모의비행장치 인증기준 마련 등을 제시하였다.

• 한국산학기술학회논문지
• /
• 제4권2호
• /
• pp.76-80
• /
• 2003

본 연구에서는 직교이방성 박판 및 후판의 휨문제에 대한 해석결과를 제시하였다. 수치해석방법으로는 유한요소법을 사용하였으며, 직교이방성판 휨문제에 대한 지배방정식은 Kirchhoff가정에 의한 박판이론과 Mindlin 가정에 의한 후판이론을 이용하여 유도하였으며 판의 폭-두께비의 변화에 따른 해석결과를 비교 검토하였다.

• 한국안전학회지
• /
• 제14권4호
• /
• pp.20-27
• /
• 1999

The standard of the allowed stress in designing components such as shafts used in machinery and aircraft should be determined. It is very important to estimate fatigue strength of a component analytically, because service stress of the components is usually under the level of its fatigue limit. Improving the fatigue strength of each component in machinery is essential for high performance, lightness, and endurance. Surface treatment of components is widely used for these purpose. In this research, the fatigue behaviors of SCM415 steel and carbonitried SCM415 steel are examined. In the analysis of the fatigue behaviors of the carbonitrided SCM 415 steel, we propose a modified fatigue strength evaluation model and modified formulae.

• 한국안전학회지
• /
• 제19권4호
• /
• pp.101-108
• /
• 2004

In this study, open conical shells with ring and stringers are analyzed A versatile 4-node shell element which is useful for the analysis of conical shell structures is used and 3-D beam element is used for stiffeners. An improved flat shell element is established by the combined use of the addition of non-conforming displacement modes and the substitute shear strain fields. The proposed element has six degrees of freedom per node and permits an easy connection to other types(beam element) of finite elements. Optimum location and optimum section properties of ring and stinger are obtained. It is shown thai the thickness of conical shell can be reduced about $20\~50\%$ by appropriate location of stiffeners.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1999년도 봄 학술발표회 논문집(I)
• /
• pp.631-637
• /
• 1999

Effect of excessive addition of water reducing agent was examined by concrete tests. Water reducing agents of lignin or naphtalene base were used in the experiment. Setting of concrete was retarded according to the increase of dosage of water reducing agent and was extremely delayed at the 3 times or more use of lignin base agent and near 5 times or more use of naphtalene base agent respectively. When water reducing agent was used more than 6 times of standard dosage, early strength of concrete was very low and the strength reduction was very severe at all test ages in the concrete using lignin base agent.

• 대한전자공학회논문지TE
• /
• 제37권5호
• /
• pp.56-61
• /
• 2000

반도체 공정 기술의 발달은 기하 급수적인 집적도의 증가를 가져오고, 이는 한 칩에 시스템을 모두 집적시키는 시스템 온 칩(SoC : System on Chip) 설계가 가능해지고, 이에 따른 설계 방법의 변화를 요구하고 있다. Soc 설계는 시스템에서 설계 사양(Specification)의 정의가 중요한 요소가 되고 있다. 본 논문에서는 MPEG 오디오 복호기에서 사용되는 IMDCT를 시스템 수준의 실행 가능한 설계 사양(Executable Specification)에 의해 설계하였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 추계학술대회 논문집 Vol.18
• /
• pp.39-40
• /
• 2005

Ferroelectric Eu-substituted $Bi_4Ti_3O_{12}$ (BET) thin films with a thickness of 200 nm were deposited on Pt(111)/Ti/SiO$_2$/Si(100) substrate by means of the liquid delivery MOCVD system and annealed at several temperatures in an oxygen atmosphere. At annealing temperature above $600^{\circ}C$, the microstructure of layered perovskite phase was observed. The remanent polarization of these films increased with increase in annealing temperature. The remanent polarization values ($2P_r$) of the BET thin films annealed at $720^{\circ}C$ were $37.71{\mu}C/cm^2$ at an applied voltage of 5 V.

• 복합신소재구조학회 논문집
• /
• 제1권4호
• /
• pp.1-5
• /
• 2010

In this study, it is presented analysis results of bending problems in the anisotropic cantilever thick plates and the anisotropic laminated cantilever thin plates bending problems. Finite element method in this analysis was used. Both Kirchoff's assumptions and Mindlin assumptions are used as the basic governing equations of bending problems in the anisotropic laminated plates. The analysis results are compared between the anisotropic laminated cantilever thick plates and the anisotropic laminated cantilever thin plates for the variations of thickness-width ratios.

• 한국안전학회지
• /
• 제21권1호
• /
• pp.114-119
• /
• 2006

In this study, laminated composite umbrella type roofs structures such as stadium, exhibition, auditorium and museum are analyzed. These structures have not been dealt with so far because of the difficulty in modeling. These have been analyzed mostly by a simplified method or a grid analysis in design. In this study, better results can be obtained by using shell element. The behavior of umbrella type shell roof under self weight is analyzed for various parameters such as the influence of diaphragm, diaphragm type, ${\gamma}-angle$ type, height/chord ratio of segment, slope of roofs, number of conical segment and subtended angle.