• 한국도로학회:학술대회논문집
• /
• 2008.03a
• /
• pp.97-102
• /
• 2008

• 한국도로학회:학술대회논문집
• /
• 2000.11a
• /
• pp.183-189
• /
• 2000

• Korean Journal of Materials Research
• /
• v.8 no.1
• /
• pp.45-51
• /
• 1998

Ti-45at%AI-1.6at%Mn 조성을 갖는 금속간화합물의 장시간 및 반복산화 거동을조사하기 위하여 반응소결법 및 플라즈마 아크 용해법으로 제조한 시편에 대하여 80$0^{\circ}C$에서는 반응소결재와 용제재 모두 등온 및 반복산화에 대하여 우수한 저항성을 나타내었다. 90$0^{\circ}C$에서는 반응소결재의 경우에는 등온 및 반복산화에 대하여 우수한 저항성을 보였으며, 중량변화와 산화피막의 박리는 극히 적었다. 이에 비해 용제재의 경우에는 등온 및 반복산화에 의해 중향이 크게 변하였으며 피막의 박리도 극심하였다. 90$0^{\circ}C$에 있어서 두 재료간의 이러한 산화거동 차이는 기지/산화물 계면 부근에 형성된 산화층의 차이에 기인하는 것으로 간주하였다. 반응소결재의 경우에는 계면 부근에 연속적인 AO$_{3}$O$_{3}$층이 형성되며, 이러한 층이 산화에 대한 보호막으로 작용하는데 비하여 용제재에 있어서는 계면 부근에 AO$_{3}$O$_{3}$와 TiO$_{2}$의 혼합층이 형성되었다. 용제재의 반복산화시에 보여진 피막의 박리는 냉각시에 TiO$_{2}$와 기지간의 열팽창계수 차이에 기인하여 발생하는 열응력을 TiO$_{2}$가 견디지 못하고 박리를 초래한 것으로 해석하였다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.32 no.1D
• /
• pp.33-39
• /
• 2012

More and more pavements are suffering from damage these days due to the below-zero winter temperatures and frequent snowfalls. From this research, the freeze-thawing mechanisms of pavements will be observed, and the freeze-thawing resistance of porous asphalt concrete mixture is to be evaluated according to various assessment methods. The investigation was conducted through applying rigid and flexible pavements to freeze-thawing resistance experiments, which include various experiments such as deformation rate measurements, Lottman tests, repeated cyclic freeze-thawing experiments, stripping resistance tests and so on. Test results revealed that the porous asphalt concrete had less deformations according to temperatures compared to dense-graded asphalt concrete due to the 20% void gap. In addition, according to the freeze-thawing repetition experiments which are effected by moisture, the porous asphalt concrete mixture showed superior resistance to repeated cyclic freeze-thawing compared to other asphalt concrete mixtures due to the drainage and the voids within the specimen.

• International Journal of Highway Engineering
• /
• v.9 no.4
• /
• pp.149-158
• /
• 2007

Evaluation of the asphalt mixture modified with crumb rubber modifier(CRM) was performed to estimate possibility of using it as a paying material. OACs(optimum asphalt content) of CRM modified asphalt mixtures by dry process and wet process were determined by Marshall mix design and Wheel tracking test and moisture susceptibility test by freezing and thawing were carried out with CRM modified asphalt mixtures at OACs. The results from these tests, resistance of permanent deformation of CRM modified asphalt mixtures were superior to one of AP-5 while showing very low resistance of moisture sensitivity by freezing and thawing. This means that CRM modified asphalt mixtures are very sensitive to freezing and thawing. However, CRM modified asphalt mixture with anti-stripping material showed high improvement to resistance of moisture susceptibility by freezing and thawing. Therefore, it is recommended that when CRM mixtures were used in domestic, CRM modified asphalt mixtures should be with prevention against freezing and thawing resistance by moisture susceptibility.

• International Journal of Highway Engineering
• /
• v.10 no.4
• /
• pp.41-52
• /
• 2008

This study is to evaluate the property for the moisture susceptibility of asphalt mixtures using anti-stripping agent. Asphalt mixtures using lime, hydrated lime and liquid anti-stripping agent are evaluated through the three types of modified moisture conditioning($H_c$, V_s$, F-T). Indirect Tensile Test, that is recommended by AASHTO TP-9, which includes creep test, resilient modulus test and strength test is used to estimate moisture susceptibility. Analysis method through Energy Ratio(ER) that is proposed by Roque at University of Florida is used to evaluate moisture susceptibility and moisture resistance effects of asphalt mixtures using anti-stripping agent. As a test result, material property of asphalt mixtures was changed by moisture conditioning methods and the types of anti-stripping agent. Also, cracking resistance of accumulated moisture damage was changed by moisture conditioning methods and the types of anti-stripping agent. Based on test result, it was found that cracking resistance using Energy Ratio was differed from 10% to 30%.

• Journal of the Korean Ceramic Society
• /
• v.37 no.9
• /
• pp.894-899
• /
• 2000

중온형 고체산화물 연료전지용 금속접속자로서의 적용가능성을 알아보기 위하여 Ducrolloy 및 Ferritic 스틸의 산화거동을 연구하였다. Ducrolloy는 고온저항이 주기적인 증감을 보이며 산화크롬막의 형성에 의해 신간에 따라 더 이상의 저항증가가 없어 장기 산화안정성을 보였다. 반면, Ferritic 스틸은 고온산화에 의해 형성된 표면 산화철막의 박리가 일어날뿐 아니라 저항이 크게 증가함을 보여 금속접속자로 응용을 위해서는 내산화코팅이 필요하였다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.39 no.4
• /
• pp.523-530
• /
• 2019

Pavement distress and traffic accidents are caused by pot-hole. In addition, direct and indirect damages of road users are increasing, such as loss of life due to personal injury and damage to vehicles. Generally, the asphalt concrete pavements are continuously aging from the production process to the terminal performance period. Aging causes stripping due to cracks and moisture penetration and weakening the pavement structure to induce pot-hole. In this study, adhesion performance and moisture sensitivity were evaluated according to aging degree in order to investigate the effect of aging on asphalt pavement. As a result of the study, the viscosity of the asphalt binder was increased with aging and the bond strength of the aged was increased 2~3 times than that of the unaged. The results of accelerated aging test showed an increases in indirect tensile strength and the increase in the TSR (Tensile Strength Ratio) by 4.2~8.9 %. As a result, it is noted that the anti-stripping and adhesion performances of the aged asphalt concrete are improved compared to the unaged one under the aging conditions of asphalt binder coated on aggregates.

• International Journal of Highway Engineering
• /
• v.3 no.4 s.10
• /
• pp.105-116
• /
• 2001

This study was performed to evaluate the characteristics of waste foundry sand (WFS) and the asphalt mixture made of a foundry waste sand. To estimate the applicability of WFS, chemical and physical properties were measured by XRF(X-ray fluorescent), and SEM(Scanning electronic microfilm). To improve the stripping resistance of WFS asphalt mixture, anti-stripping agents (a hydrated lime and a liquid anti-stripping agent) were used. To improve tensile properties and durability of WFS asphalt concrete mixture, LDPE(low-density polyethylene) was used as an asphalt modifier Marshall mix design, indirect tensile strength, tensile strength ratio(TSR) after freezing and thawing, moisture susceptibility and wheel tracking tests were carried out to evaluate performance of WFS asphalt concrete. Comparing with conventional asphalt concrete, WFS asphalt concretes showed similar or the better qualify in mechanical properties, and satisfied all specification limits. Therefore, it Is concluded that waste foundry sand can be recycled as an asphalt pavement material.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2003.03a
• /
• pp.226-226
• /
• 2003

일반적으로, 고분자 매트릭스에 층상 점토광물이 분산되어 얻어지는 복합재료는 세가지 형태를 이룬다. 첫째 통상의 복합재료는 고분자 매트릭스 내에 점토입자가 고루게 분산된 상태를 말하며, 둘째 점토 층 사이에 고분자 모노머나 올리고머가 일부분 삽입된 삽입형 복합재료(intercalated composite)이며, 셋째 점토 층 사이에 삽입된 모노머나 올리고머의 경화 또는 중합반응을 통해 점토내의 한층 한층 균일하게 매트릭스 내에 분산된 박리형 나노복합소재(exfoliated nanocomposite) 이다. 이들 복합재료들 중 박리형 나노복합소재는 적은 양의 점토가 단위 층으로 고분자 매트릭스에 완전히 분산되어 다양한 물성의 향상이 기대되는 재료이다. 따라서 최근 고분자의 기계적 강도, 팽윤 저항성 그리고 차폐특성 둥 전반적인 물성을 향상시키는 방법으로 층상 점토광물의 층 사이에 다양한 유기물을 삽입하여 층간거리를 확장시킨 유기 점토광물을 제조하고 이를 고분자 소재에 첨가하여 박리형 나노복합소재를 제조하는 방법이 많은 연구가 수행되고 있다.