• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.20 no.2
• /
• pp.741-751
• /
• 1996

The coupled conduction and convection heat transfer from the protruding heat source in a vertical channel is numerically investigated. Conjugate solution of the two-dimensional energy equation is obtained for the incompressible air flow over the rectangular block with local heat source. It was found that several recirculation zones and separation bubble near the block were related to Re and Gr. And the results show that fractions of the heat transfer through each of the block face, maximum temperature of the block and the relative effect of each parameter on the maximum temperature and heat transfer.

• Proceeding of EDISON Challenge
• /
• 2012.04a
• /
• pp.41-44
• /
• 2012

본 연구에서는 풍력발전에 충분한 가능성을 가진 산악 지형을 모델링하여 유동의 흐름을 분석하였다. 실제 지형(설악산, 점봉산)에 대한 1/500 축소모형을 Gaussian 함수로 표현하였다. EDISON_CFD을 사용하여 산악지형의 난류유동을 해석하였으며, 해석결과의 신뢰성 확인을 위해 격자분해능에 따른 속도분포를 비교하였다. 산악지형에 따른 유동현상을 속도분포 및 유선함수 등에 의해 분석하였다. 또한 풍력터빈 설치 높이 기준에 의거하여 지형변화에 따른 주 유동방향 속도분포를 살펴보았다. 지형효과에 따른 유동해석결과를 기반으로 풍력 발전 가능 영역이 논의되었다.

• The Journal of Engineering Geology
• /
• v.25 no.2
• /
• pp.227-235
• /
• 2015

In recent years, owing to the frequent occurrence of natural disasters, the inspection and maintenance of structures have become increasingly important on a national scale. However, because most structural inspections are carried out manually, and due to the lack of objectivity in data acquisition, quantitative data are not always available. As a result, researchers are seeking ways to collect and standardize survey data using terrestrial laser scanning, thereby bypassing the limitations associated with visual investigations. However, field data acquired using a laser scanner have been required to measure changes in structure geometry resulting from passive deterioration. In this study, we demonstrate that it is possible to identify the processes of structural deterioration (e.g., efflorescence, leakage, delamination) using intensity data from terrestrial laser scanning. Additionally, we confirm the viability of automated classification of alteration type and objectification of the polygon area by establishing intensity characteristics. Finally, we show that our method is effective for structural inspection and maintenance.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.19 no.4
• /
• pp.92-100
• /
• 2015

The aim of this study is to evaluate the fracture characteristics of ductile fiber reinforced cement based composites with 1.5 volume ratio of polyvinyl alcohol and steel fiber by high velocity impact of steel projectile. We used gunpowder impact facility to evaluate the fracture characteristics of ductile fiber reinforced cement based composites by collision of steel projectile, and the impact velocity was from about 150 to 1,000m/s. The results of evaluation on the fracture characteristics of ductile fiber reinforced cement based composites were penetration grade, which is the kinetic energy more than three times of no-fiber reinforced specimen (Plain). In addition, ductile fiber reinforced cement based composites did not occurred critical damage other than the debris. In the case of mass loss, Plain specimen was proportional to kinetic energy of steel projectile, while ductile fiber reinforced cement based composites was not significantly affected by kinetic energy of steel projectile. In particular, this tendency had a close relationship with the fracture characteristics of back side of specimens, and the scabbing inhibiting efficiency of PVA specimen was higher than S specimen. In the results of verifying relationship between front and back side calculated by local damage, scabbing occurred at the region close to the back side in the ductile fiber reinforced cement based composites unlike Plain specimen. Thus, in this study, we examined principal fracture behaviors of ductile fiber reinforced cement based composites under collision of steel projectile, and verified that impact resistance performance was improved as compared to Plain specimen.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.14 no.4
• /
• pp.333-338
• /
• 2008

The coastal zone is a delicate and dynamic area in which the majority of a water kinetic energy is dissipated. These processes are subsequent to the transport of the beach materials. In comparison to emerged breakwaters, submerged structures permit the passage of some wave energy and in turn allow for circulation along the shoreline zone. This research aims to examine the beach erosion prevention capability of submerged structure by laboratory model. The flow characteristics behind a submerged obstacle with bottom gap were experimentally investigated at Re = $1.2{\times}10^4$ using the two-frame PIV(CACTUS 2000) system. Streamline curvature field behind the obstacle has been obtained by using the data of time-averaged mean velocity information. And the large eddy structure in the separated shear layer seems to have signification influence on the development of the separated shear layer. As bottom gap size increases, the recirculation occurring behind the obstacle moves toward downstream and its strength is weakened.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.39 no.8
• /
• pp.702-710
• /
• 2011

This paper aims to verify the applicability of OpenFOAM, the widely recognized open source CFD code, to external flows commonly found in aeronautical problems. To this end, several representative flow cases are selected first from subsonic to supersonic flow fields. Then, the computational results obtained from OpenFOAM are systematically compared against available data from experiments and other numerical codes. It was found that the strength and location of shock are well predicted and the effects of boundary conditions on the computed results are reviewed. Subsonic flow with massive separation is selected to validate the prediction capability of OpenFOAM. Based on the current results, the limitation and possibility of OpenFOAM was confirmed and for future study using OpenFOAM was suggested.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.34 no.10
• /
• pp.893-899
• /
• 2010

A previous study showed that hemodynamics is correlated with stenosis in the coronary artery. The flow characteristics and the distributions of the hemodynamic wall parameters in the coronary artery are investigated under physiological flow condition. The present study also aims to establish the mechanism of the generation of atherosclerosis by analyzing the hemodynamic variables in the coronary artery where atherosclerosis frequently occurs. The stenosis phenomena due to atherosclerosis are related to not only the biochemical reaction between blood and blood vessels but also the hemodynamic factors sush as flow separation and oscillatory wall shear stress. As the bifurcated angle increases, the size of the recirculation area that appears in the cross section increases and disturbed flow is observed in this area. We speculate that this area is the starting point of atherosclerosis in the coronary artery.

• 대한공업교육학회지
• /
• v.32 no.2
• /
• pp.87-103
• /
• 2007

The purpose of this study was to develop of the smoke flow visualization device of learning wind tunnel, teaching-learning materials in order to demonstrate air-flow around the fluid-flow field qualitatively and understand the resistance concepts of fluid-flow in secondary school. The contents of this study were consisted of the development and experiment of smoke flow visualization for learning wind tunnel. The main results of this study were as follows: First, this developed teaching-learning material here will help students understand the fundamental physical phenomena related with the resistance of fluid and the various patterns of air-flow in the field of transportation technology. Second, flow visualization has shown the same tendency in both of theoretical and experimental patterns. Third, the airfoil model has the smallest wake region meaning resistance against air-flow of circular cylinder and square rod model. Forth, flow separation point at leading edge and wide wake region began to show under the angle of attack of airfoil model ${\alpha}$ is $20^{\circ}$. Fifth, the wake width of the flow field behind a golf ball with dimple became slightly narrower than that without dimple. Sixth, the developed device was made to apply the teaching and learning materials for the experiment and practice in order to increase students' interest and attitude.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.212-212
• /
• 2016

2차원 탄소나노재료인 그래핀은 우수한 물성으로 인하여 광범위한 분야로 응용이 가능할 것으로 예상되어 많은 주목을 받아왔다. 이러한 그래핀의 응용가능성을 실현시키기 위해서는 보다 손쉽고 신뢰할 수 있는 합성방법의 개발이 필요한 실정이다. 그래핀의 합성 방법들로 흑연을 물리적 및 화학적으로 박리하거나, 특정 결정표면 위에 방향성 성장의 흑연화를 통한 합성, 그리고 열화학기상증착법(Thermal chemical vapor deposition; T-CVD) 등의 합성방법들이 제기되었다. 이중 T-CVD법은 대면적으로 두께의 균일성이 높은 그래핀을 합성하기 위한 가장 적합한 방법으로 알려져 있다. 그러나 일반적으로 T-CVD공정은 원료 가스인 탄화수소가스를 효율적으로 분해하기 위하여 $1000^{\circ}C$부근의 온공정이 요구되며, 이는 산업적인 응용의 측면에서 그래핀의 접근성을 제한한다. 따라서 대면적으로 고품질의 그래핀을 저온합성 할 수 있는 공정의 개발은 필수적이다. 본 연구에서는, 플라즈마를 이용하여 원료가스를 효율적으로 분해함으로써 그래핀의 저온합성을 도모하였다. 퀄츠 튜브로 구성된 수평형 합성장치는 플라즈마 방전영역과 T-CVD 영역으로 구분되며, 방전되는 유도결합 플라즈마는 원료가스를 효율적으로 분해하는 역할을 한다. 합성을 위한 기판과 원료가스로는 각각 전자빔 증착법을 통하여 300nm 두께의 니켈 박막이 증착된 실리콘 웨이퍼와 메탄가스를 이용하였다. 저온합성공정의 변수로는 인가전력과 합성시간으로 설정하였으며, 공정변수의 영향을 확인함으로써 그래핀의 저온합성 메커니즘을 고찰하였다. 연구결과, 인가전력이 증가되고 합성시간이 길어짐에 따라 원료가스의 분해효율과 공급되는 탄소원자의 반응시간이 보장되어 그래핀의 합성온도가 저하가능함을 확인하였으며, $400^{\circ}C$에서 다층 그래핀이 합성됨을 확인하였다. 또한 플라즈마 변수의 보다 정밀한 제어를 통해 합성온도의 저온화와 그래핀의 결정성 향상이 가능할 것으로 예상된다.

• Journal of the Korea Convergence Society
• /
• v.7 no.3
• /
• pp.35-44
• /
• 2016

The purpose of this study is to examine the theoretical background of art make-up and surrealism in depth and shed new light on creative thoughts coming through application of Depaysement and various kinds of expression realized through art make-up, where art and make-up are incorporated. The study method is to conduct prior research followed by a theoretical study of the concept and techniques of Surrealistic Depaysement and theoretical background of art make-up through specialized books and internet sources and then to create 4 artworks representing characteristics of Depaysement technique categorized in dual image, fusion of heterogeneous objects, modification and conversion, and change of space. This examination resulted in first, a foundational ground for fusion and use of art and make-up sectors by creating a realm of expression based on creativity through incorporation of art and makeup and second, a sense of freshness and unfamiliar-ness by creation of an image in a completely unfamiliar space. Therefore, the researcher sets a direction for ways to come up with new ideas and expand the realm of expression and hopes that the art-makeup does not just become an aesthetic tool but turn itself as an art genre.