• Proceedings of the KSME Conference
• /
• 2001.06b
• /
• pp.289-294
• /
• 2001

The two prototypes of a Wheel Type Locomotive Mechanism Using Micro motor for a Capsule-Type Endoscope are outlined and realized. Basic concept of these mechanisms is to use a rod-shaped wheel, with which these mechanisms can go over the haustral folds inside colon. The actuator of Prototype I is geared dc motor and the actuator for steering is Shape Memory Alloy. Prototype I goes through the whole area of colonoscopy training model. Prototype II can not only go forward and backward, but also be steerable with 2 geared dc motors. Prototype II goes through dead pig colon.

• Journal of the Korean Society for Precision Engineering
• /
• v.30 no.1
• /
• pp.32-38
• /
• 2013

Small mobile robots which use round wheels are suitable for driving on a flat surface, but it cannot climb the obstacle whose height is greater than the radius of wheels. As an alternative, legged-wheels have been proposed by many researchers due to its better climbing performance. However, driving and climbing performances have a trade-off relationship so that their driving performance should be sacrificed. In this study, in order to achieve both driving and climbing performances, a new transformable wheel was developed. The developed transformable wheel can have a round shape on a flat surface and change its shape into legged-wheel when it makes a contact with an obstacle. For design of the transformable wheel, the performance of legged-wheel was analyzed with respect to the number and curvature of the leg, and then the new transformable wheel was designed based on the analysis. Contrary to the existing transformable wheels that contain additional actuators for the transformation, the developed transformable wheel can be unfolded without any additional actuator. In this study, in order to validate the transformable wheel, a simple robot platform was fabricated. Consequently, it climbed the obstacle whose height is 2.6 times greater than the wheel radius.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.24 no.4
• /
• pp.412-417
• /
• 2014

This paper presents the development and control of an omni-directional holonomic mobile robot platform, which is equipped with three lateral orthogonal-wheel assemblies. Omni-directionality can be achieved with decoupled rotational and translational motions. Simulation studies on collision avoidance are conducted. A real robot is built and its hardware is implemented to control the robot. Control algorithm is embedded on DSP and FPGA chips. Hardware for motor control such as PWM, encoder counter, serial communication modules is implemented on an FPGA chip. Experimental studies of following joystick commands are performed to demonstrate the functionality and controllability of the robot.

• Journal of Institute of Control, Robotics and Systems
• /
• v.7 no.9
• /
• pp.733-740
• /
• 2001

A monitoring robot capable of doing network and RF communication is introduced. The robot has several features that poses arbitrary position thanks to a mechanism combining the 4wheel drive and 4 link mechanism, transmits an image and command data via RF wireless communication. Moreover, the image data from the camera are transferred through a network communication. The robot plays a role in monitoring what is happening around the robot, and covers wide range due to a moving camera associated with the 4 arms. The robot can adjust its mass center by the 4 link mechanism, hence it guarantees a stability in moving on the slope.

• The Journal of the Korea Contents Association
• /
• v.18 no.12
• /
• pp.140-149
• /
• 2018

Along with the recent increase in national income, social phenomena such as aging due to a decrease in population and an increase in single households are observed. There are also an increasing number of households raising pets in proportion to aging households and the increase in the number of single households, most of which use animal companions to overcome loneliness and boost domestic vitality. As more and more people consider pets as family members, the size of the domestic pet market is also growing. The growing number of pets in older households and single households is not properly managed by care such as food meals and exercise management for pets. It is necessary to research and develop robots that can monitor animal companions remotely, feed a certain amount of food at regular intervals, and manage their health through exercise. Among pet companions, dog selection is the highest. Therefore, this study identified robot research on driving methods, examples of existing pet care systems, and researched pet care robots using obstacle avoidance algorithms. In order to use the snack pay behavior and obstacle avoidance algorithm of the pet animals by applying IoT and we .oPI technology, it is able to use ultrasonic sensors on the front and has four infrared sensors on the back. However, this study does not reflect the characteristics of other pet animals as a study on pet care robots, and it requires continuous observation and testing.

• 제어로봇시스템학회:학술대회논문집
• /
• 1997.10a
• /
• pp.528-531
• /
• 1997

This paper deals with the kinematic and dynamic modeling of a 3 degree-of-freedom redundantly actuated mobile robot for the purpose of analysis and control. Each wheel is driven by two motors for steering and driving. Therefore, the system becomes force-redundant since the number of input variable is greater than the number of output variable. The kinematic and dynamic models in terms of three independent joint variables are derived. Also, a load distribution method to determine the input loads is introduced. Finally we demonstrate the feasibility of the proposed algorithms through simulation.

• Journal of Institute of Control, Robotics and Systems
• /
• v.13 no.11
• /
• pp.1082-1091
• /
• 2007

In this paper, we developed a new hybrid mobile robot which can climb stairs and go over thresholds by crawl gait with embedded real-time control software. This robot is also categorized into hybrid robot that has advantages of wheeled mobile robot and legged mobile robot, but adopts gait feature of crocodile named belly crawl. We imitated the belly crawl using four legs of 2 DOF, four omni-directional wheels, and embedded control software which controls legs and wheels. This software is developed using RTAI/Linux, real-time drivers. As a result, the new hybrid mobile robot has crawl gait. Using this feature, the new hybrid mobile robot can climb stairs and go over thresholds just by path planning of each leg with size of stairs and thresholds, and computing the movement distance of robot body center without considering stability. The performance of our new hybrid mobile robot is verified via experiments.

• Journal of Institute of Control, Robotics and Systems
• /
• v.21 no.4
• /
• pp.342-348
• /
• 2015

This paper presents a two-wheel balancing mobile robot with linear workspace extension structures. The two-wheel mobile robot has two linear motions at the waist and shoulder to have extended workspace. The linear motion of the waist and shoulder provides some structural advantages. A dynamic equation of the simplified robot system is derived. Simulation studies of the position control of the robot system are performed based on the dynamic equations. The dynamic relationship between a two-wheel mobile system and linear extension mechanism is observed by simulation studies.

• The Journal of Korea Robotics Society
• /
• v.9 no.4
• /
• pp.250-257
• /
• 2014

In this paper, a new mobile robot, so called a rollerbot, is presented, which has single body and rugby-ball shaped roller wheel. A rollerbot has single point contact on ground and low energy consumption in motion because of the reduced friction. By changing center of mass using a balancing weight, a rollerbot is able to get steering force. The vertical position of mass center of the rollerbot in this paper is designed to lie inside radius of the roller wheel, so that to have stable equilibrium position. Thus, the posture and the steering control of the rollerbot can be easily done by changing the center of mass. Kinematics of the rollerbot is derived by transformation of differential motion in this paper.

• Journal of Institute of Control, Robotics and Systems
• /
• v.22 no.5
• /
• pp.353-360
• /
• 2016

In this paper, a DOB (disturbance observer) is designed for the steering stabilization of one-wheeled balancing robot. Based on the simple stick model of the single-wheeled robot, DOBs and the corresponding Q filters are designed. Although the proposed models are simple, DOBs are desired to deal with model uncertainties for the enhanced balancing performance. Experimental studies of two different cases of Q filter design are conducted to evaluate the performances of DOBs. Their performances are compared through balancing control experiments.