• 한국의류산업학회지
• /
• 제15권6호
• /
• pp.1000-1009
• /
• 2013

Well-fitting riding breeches provide a comfortable ride. Horse-riding breeches should fit the lower body with patches located on the inside of hip and knees to prevent tears and slips. This study provides information about the fit of women's breeches using 3D human body scan data wearing commercially available two breeches according to posture. To get information about breeches fit, we measured the angle of waist line, the length, and the area of the breeches fit on four 20's women. This research showed the problem which was down for waist back line in the case of the horseback riding pose. The back waistline of the riding breeches should be raised compared to the front waistline; subsequently, an increased waistline angle results in less back waistline decrease. The breeches have plenty of length from back waist to crotch so the breech fit can be improved. The thigh circumference increased when riding in the front; therefore, good elasticity of the weft direction of the fabric is recommended. The length increase and the peripheral increase of the front knee significantly increased the surface area of the knee; consequently, knee patch material should be a two-way elastic fabric in all directions to enhance comfort according to riding motion.

• 복식문화연구
• /
• 제16권1호
• /
• pp.48-57
• /
• 2008

The purpose of this study was to examine the inconvenience when putting on stretchable pants and to analyze the whole actual conditions of making of the lining fabrics. For this study, we conducted a survey of women in their twenties and collected the basic data and master pattern through material of a woman's wear brand and the interview and questionnaires. The results of this study were as follows. First, the survey result for the woman consumers it showed that the most uncomfortable problem about the lining of pants was not sufficient stretch as much as the out-shell. Secondly, it was shown that many brands(46.7%) were using the lining fabrics of stretch clothes mixed with 'non-stretch fabrics' and 'stretch fabrics'. The result of lining pattern making for the stretch pants showed that the ease of the lining fabrics was 0 to 4cm in the hip girth more than out-shell. The ease in crotch width was 0 to 1.3cm for lining fabrics. But in the stretch lining fabrics the ease for front crotch width was 0 to 1cm more than out-shell. The lengths of crotch rising were -0.7 to 1.3cm for the non-stretch lining fabrics and -1 to 1cm for the stretch lining fabrics.

• 복식문화연구
• /
• 제16권4호
• /
• pp.609-618
• /
• 2008

The purpose of this study is to examine the inconvenience when putting on stretch pants and to compare and analyze the pattern making method of pants made of the stretch and non-stretch fabric to develop functional and good looking stretch pants. For this study, we conducted a survey of women in their twenties and collected the basic data and master pattern through material of a woman's wear brand and the interview and questionnaires. The results of this study are as follows. First, the survey result for the woman consumers showed that pants were estimated as the most uncomfortable item among the stretch clothes and when they put the stretch pants on, the most uncomfortable parts of out-shell were the hip girth and rise. Secondly, the result of pattern making method of the pants was as follows. The ease of the stretch pants pattern was 0cm in the waist girth and -1 to -1.5cm in the hip girth more than non-stretch pants. The ease in crotch, inseam and outseam length was 0cm for both.

• 한국해양공학회지
• /
• 제28권2호
• /
• pp.102-110
• /
• 2014

This paper presents the results of an experimental and numerical study on the towing characteristics of a barge. A series of model tests were carried out at the Ocean Engineering Basin of KRISO. A model with a 1:50 scale ratio was constructed out of wood. First, force coefficient tests were performed in order to obtain the surge, sway, and yaw force coefficients of the barge. The focus was the effect of skeg on the force coefficients. The stability parameter was calculated from the force coefficients. Next, towing tests in calm sea were carried out with different towline lengths and towing speeds. The trajectories of the barge and the towline tensions were measured during the tests. The measured trajectories were compared with numerical simulation results using a cross-flow model. The towing stability of the barge in a calm sea is discussed in detail.

• 한국해양공학회지
• /
• 제27권1호
• /
• pp.67-73
• /
• 2013

This paper presents the results of a numerical study on the towing stability of barges. Towing simulations were carried out by using two different numerical models (MMG model and cross-flow model). Stability criteria are also suggested based on the analysis of the linearized governing equations for towed vessel motion. In order to validate the present numerical models, the experimental data of Yasukawa et al. (2006) were used. Simulations were conducted for single and double barges under constant towing speed and direction conditions. The time histories of the heading angle, yaw rate, and towline tension were compared between the numerical results and experiments. The effects of the towline length on the slewing frequency and maximum heading angle were also observed. In addition, a series of numerical simulations using variable hydrodynamic coefficients were performed to investigate the effects of the hydrodynamic forces on the towing stability.

• 한국유체기계학회 논문집
• /
• 제14권5호
• /
• pp.48-54
• /
• 2011

Structural modifications of a ship may cause a fatal accident such as sinking and wrecking of ship. Especially, barge ship can be easily reconstructed to load more bulk cargo. In this study, for a real accident case, change of mooring force due to structural modification was analyzed to evaluate accident risk. A two dimensional dynamic model for the barge ship was constructed to compute mooring forces with related to floating motion. The equation of motion was established in Matlab code and buoyancy was calculated by using direct integration of submerged volume. The results showed that wind force, current force, and mooring force after rebuilding was approximately 4.3 kN, 14 kN, 1,561 kN respectively. The maximum force of mooring force according to the length of mooring cable were 1,614 kN at 30 m of mooring cable. Thus, an arbitrary modification of ship lead instability and unreliable result so that illegal rebuilding of ship should be avoided.

• 한국해양공학회지
• /
• 제29권4호
• /
• pp.283-290
• /
• 2015

This paper presents the results of a numerical study on the towing characteristics of a barge under various wind conditions. First, stability criteria, including the wind force, were derived based on the linear motion equations of a towed vessel. The effect of the wind force on the towing stability was investigated using stability criteria. Next, towing simulations were carried out using a nonlinear time-domain simulation method. In this case, the towline was modeled as a simple spring-damper, and the wind force was computed using the wind coefficient from CFD calculations. Simulations were conducted for a barge under a constant towing speed and constant wind speed conditions. The effect of the wind direction on the slewing motion was also observed. In addition, a series of numerical simulations using variable wind speeds were performed for the present barge with and without a skeg.

• 대한가정학회지
• /
• 제46권9호
• /
• pp.137-146
• /
• 2008

This study was conducted in order to spread out lower body 3D scan data of men in their twenties. The aim was to achieve slacks pattern with ease allowance through comparison with existing flat patterns. For conversion of 3D scan data into 20 pattern, reference lines were established by using Rapid Foam in 3D shape analysis software. 2C-AN program and Yuka CAD were used to convert 20 pattern earned with straight posture of 3D scan data into slacks pattern by using Triangle Simplification & Runge-Kutta Method. In order to achieve this we needed to set a line 9cm below the hip line, to array vertex of each block to crease line while maintaining the horizontal line. And then we needed to set ease allowance in back crotch and to set waist circumference or hip circumference ease allowance in side seam of slacks. Results showed that long front crotch length can be achieved if 3D scan data is compared with 20 existing flat pattern. Slacks pattern that raise front crotch by about 1.5cm compared to back crotch and also possess ease allowance in back crotch area are great in appearance evaluation.

• 한국해안·해양공학회논문집
• /
• 제27권5호
• /
• pp.364-371
• /
• 2015

본 연구는 험한 해양환경하에서 천해역에 떠 있는 부유체 해양양식장의 동적 거동 해석기법을 연구하기 위해 시도되었다. 본 연구의 내용은 양식장의 설치 위치를 연안이 아닌 근해지역으로 옮겼을 때 파도의 영향과 함께 계류라인이 해저면에 설치된 영향, 즉 해저면의 영향이 많은 영향을 미칠 것이라는 타 논문에서 발표된 사실을 밝히기 위해 수치해석 프로그램을 개발한 내용이며, 이를 통해 천해역에 설치된 계류라인과 해양 양식장을 모형화한 부유체 바지의 연성된 동적 응답해석을 수행할 때 해저면의 강성을 고려할 수 있는 프로그램을 확보하게 되었다.

• 한국의상디자인학회지
• /
• 제14권4호
• /
• pp.127-137
• /
• 2012

The purpose of this study is to recognize the differences of visual evaluation by variations in width of hem line and waistline position of the flare pants. The stimuli are 9 samples: One control group, 3 variations of the width of hem line and 3 variations of the waistline position. The data has been obtained from 44 fashion students. The data has been analyzed by Factor Analysis, Anova, Scheffe's Test and the MCA method. The results of the study are as follows: The visual evaluation by the width of hem line and waistline position of flare pants are composed of 5 factors : physical characteristics, elegance, originality, comfort, and stiffness. Among these factors, the physical characteristic is evaluated to be the most important factor. As a v isual evaluation result o f changes in the width o f hern l ine, 8 4 cm in width (the narrowest width) was highly evaluated in physical characteristics, elegance, and originality factors. For the result of changes in the waistline position, high-waisted flare pants were highly effective in physical characteristics, and also evaluated well in elegance, originality and stiffness factors. The flare pants did not show any interaction between the width of hem line and waistline position. The waistline position had more influence on visual evaluation in physical characteristics, originality and comfort factors while elegance and stiffness factors were affected by the width of hem line.