• Journal of the Korean Magnetics Society
• /
• v.22 no.5
• /
• pp.173-177
• /
• 2012

The multilayer structure of glass/Ta(5.8 nm)/NiFe(5 nm)/Cu(t nm)/NiFe(3 nm)/FeMn(12 nm)/Ta(5.8 nm) as typical GMR-SV (giant magnetoresistance-spin valve) films is prepared by ion beam sputtering deposition (IBD). The coercivity and magnetoresiatance ratio are increased and decreased for the decrease of Cu thickness when the thickness of nonmagnetic Cu layer from is varied 2.2 nm to 3.0 nm. It means that the decrease of non-magntic layer is effected to the interlayer exchange coupling of pinned layer and the spin configuration array of free layer. For experiment of detecting and dropping of magnetic beads we used the GMR-SV sensor with glass/Ta/NiFe/Cu/NiFe/FeMn/Ta structure. From the comparison of before and after for the dropping status of magnetic bead, the variations of MR ratio, $H_{ex}$, and $H_c$ are showed 0.9 %, 3 Oe, and 2 Oe, respectively. The fabrication of GMR-SV sensor was included in the process of film deposition, photo-lithography, ion milling, and MR measurement. Further, GMR-SV device can be easily integrated so that detecting biosensor on a single chip becomes possible.

• Journal of the Speleological Society of Korea
• /
• no.62
• /
• pp.11-16
• /
• 2004

Uro cave is a livestone cave formed at the Cambrian period. Uro cave is situated in Urosil, HogyeMyen, Moonkyunssi, HyungBok province. The temperature of the Uro cave is about 12～$15^{\circ}C$, humidity 90～95%, pH 7～8, Water temperature 12～$15^{\circ}C$, Carbon dioxide 500～900ppmv, hardness 110mg/$\ell$ in Conclusion, Uro cave does not have values of topography, environment, and tourism resource.

• KSBB Journal
• /
• v.21 no.6 s.101
• /
• pp.418-421
• /
• 2006

Fatty acid methyl esters, also referred to as biodiesel, have been determined to have a great deal of potential as substitutes for petro-diesel. In order to enhance productivity in the biodiesel production process, feedstocks were previously recommended to be anhydrous, with a free fatty acid content of less than 0.5%. In this study, the effects of several catalysts, methanol molar ratio, catalyst amount, and reaction time on the reduction of free fatty acid level were studied with a simulated feedstock consisting of 20% oleic acid in rapeseed oil. Ferric sulfate was selected as the best catalyst. Increasing the catalyst amount and methanol molar ratio is very effective in decreasing the acid value of the simulated mixture. Our results may provide useful information with regard to the development of more economic and efficient free fatty acid removal system.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.36 no.1
• /
• pp.41-45
• /
• 2010

Emulsion body cleansing systems containing high levels of occlusives have recently been developed such as using insoluble crystalline hydroxy waxes, insoluble crystalline surfactant structures, encapsulated particles and smectite clay. In this study, moisturizing effect of various occlusives such as petrolatum and triglycerides was researched in emulsion body cleansing systems. The experiment shows that petrolatum has less moisturizing capacity in emulsion body cleansing systems than triglycerides. In "leave-on" products such as lotion and cream formulations, the moisturizing capacity of petrolatum is more than that of triglycerides, but in "wash-off" emulsion body cleanser of this research, different results appeared. Emulsion body cleansing systems contained high levels of anionic and amphoteric surfactants, therefore petrolatum has more solubility and less deposited amount into the skin during washing process than triglycerides.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.3
• /
• pp.763-769
• /
• 2021

In this study, ionic liquids were synthesized to remove carbon dioxide (CO2) on a laboratory scale. The vapor-liquid absorption equilibrium device (VLE) was used to investigate the carbon dioxide absorption capacity. In the regeneration study, the absorption capacity after regeneration was reduced by approximately 7% for all ionic liquids, in which the anion was sulfite-based, showing excellent regeneration. Ethyl sulfite showed the highest absorption capacity of CO2 among the ionic liquids based on the sulfite anion. In particular, the absorption capacity of [beim] ethyl sulfite was 1.1 mol CO2 / mol IL at an absorption equilibrium pressure of 22 bar. In the regeneration study, the absorption capacity after regeneration was reduced by approximately 7% for all ionic liquids, in which the anion was sulfite-based, from which regeneration is outstanding. After the absorption experiment, the viscosity of the sample tended to decrease by approximately 8% compared to that before the absorption experiment. On the other hand, the absorbent was synthesized in the first step. Moreover, the raw material used is also inexpensive and has excellent reproducibility and highly stable absorbent capacity.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.41-41
• /
• 2010

상온에 준하는 저온의 플라즈마를 발생시키는 장치들이 개발되면서, 저온 플라즈마와 생체조직간의 상호작용에 대한 연구가 큰 관심을 끌고 있다. 플라즈마에서 발생되는 다량의 이온과 활성종, 그리고 UV 등이 박테리아나 세포들과 작용함으로 해서 암세포 사멸, 치아 미백, 박테리아 살균/멸균, 지혈등의 효과들이 나타나고 있으며, 이러한 효과들을 극대화할 수 있는 장치 개발과 플라즈마와 생체조직간의 상호작용 메카니즘을 규명하는 것이 중요한 이슈가 되고 있다. 나노 금입자를 암세포의 막단백질인 FAK의 항체와 결합시킨 중합체를 만들어서, 암세포 표면에 나노 금입자붙이고, 플라즈마를 조사했을 때, 나노 금입자가 부착되지 않았을 경우에 비해서, 5배이상 사멸률이 증가하였다.[1] 변색된 치아에 미백제의 주성분인 과산화수소를 도포하고, 10분간 플라즈마를 조사하게 되면, 과산화수소만 도포했을 때에 비해, 치아 표면의 색이 3배이상 밝아지는 것을 관찰할 수 있었다. 과산화수소를 플라즈마에 노출시켰을 때, 활성종인 OH의 생성이 2배이상 증가하였고, 플라즈마에 의한 OH 생성의 촉진이 치아 미백효과가 증대되는 주된 요인인 것으로 추측된다.[2] 플라즈마에서 발생되는 O, $O_3$와 같은 활성종들은 살균력이 뛰어나기 때문에, 저온 플라즈마를 의료기구의 소독/멸균에 응용할 가능성이 아주 크다. 대장균이나 구강 세균이 플라즈마 처리로 5분이내에 멸균되는 것을 확인하였고, 핸드피스와 같은 의료기구를 오염시켜서 멸균 테스트를 수행하고 있다.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.17 no.4
• /
• pp.419-427
• /
• 2019

The application of ion crystallization technology was considered as a way to increase the operating efficiency and improve the operating performance of a liquid waste management system (LWMS) in the Advanced Power Reactor 1400 (APR 1400). Although ion crystallization technology has not been practically applied to Nuclear Power Plants (NPPs) until now, a previous experimental study demonstrated that it is possible to selectively remove at least 95% of various nuclide ions present in the liquid radioactive waste of NPPs. We reviewed the possibility of applying ion crystallization technology to the existing LWMS by applying the nuclide removal rate of ion crystallization technology and prepared a way to improve the existing LWMS in the APR 1400. Furthermore, we determined the optimized application location of ion crystallization technology in the existing LWMS by considering decontamination characteristics of the ion crystallization technology and the existing LWMS design features and operating experiences. The application of ion crystallization technology to the liquid waste collection tank, where liquid radioactive materials are collected, will have the least impact on the existing design while providing the greatest improvement. It is expected that the application of ion crystallization technology to the current APR 1400 or new NPPs would increase the operating efficiency of the LWMS and result in an improvement of system performance.

• The Journal of Korean Society for Radiation Therapy
• /
• v.18 no.1
• /
• pp.1-5
• /
• 2006

Purpose: IMRT quality assurance(Q.A) is consist of the absolute dosimetry using ionization chamber and relative dosimetry using the film. We have in general used 0.015 cc ionization chamber, because small size and measure the point dose. But this ionization chamber is too small to give an accurate measurement value. In this study, we have examined the degree of calculated to measured dose difference in intensity modulated radiotherapy(IMRT) based on the observed/expected ratio using various kinds of ion chambers, which were used for absolute dosimetry. Materials and Methods: we peformed the 6 cases of IMRT sliding-window method for head and neck cases. Radiation was delivered by using a Clinac 21EX unit(Varian, USA) generating a 6 MV x-ray beam, which is equipped with an integrated multileaf collimator. The dose rate for IMRT treatment is set to 300 MU/min. The ion chamber was located 5cm below the surface of phantom giving 100cm as a source-axis distance(SAD). The various types of ion chambers were used including 0.015cc(pin point type 31014, PTW. Germany), 0.125 cc(micro type 31002, PTW, Germany) and 0.6 cc(famer type 30002, PTW, Germany). The measurement point was carefully chosen to be located at low-gradient area. Results: The experimental results show that the average differences between plan value and measured value are ${\pm}0.91%$ for 0.015 cc pin point chamber, ${\pm}0.52%$ for 0.125 cc micro type chamber and ${\pm}0.76%$ for farmer type 0.6cc chamber. The 0.125 cc micro type chamber is appropriate size for dose measure in IMRT. Conclusion: IMRT Q.A is the important procedure. Based on the various types of ion chamber measurements, we have demonstrated that the dose discrepancy between calculated dose distribution and measured dose distribution for IMRT plans is dependent on the size of ion chambers. The reason is small size ionization chamber have the high signal-to-noise ratio and big size ionization chamber is not located accurate measurement point. Therefore our results suggest the 0.125 cc farmer type chamber is appropriate size for dose measure in IMRT.

• Parasites, Hosts and Diseases
• /
• v.23 no.1
• /
• pp.175-177
• /
• 1985

요꼬가와흡충의 피낭유충 70,000개씩을 개 2마리에 실험감염시키고 4주일 및 8주일에 각각 관찰한 바 8주일 감염된 개의 소장에서는 액상 장내용물을 관찰할 수 없었다. 그에 비해 4주일간 감염된 개의 소장에는 액상 장내용물이 장관에 있었고 그 양은 소장을 6등분하였을 때 각등분에서 분리한 요꼬가와흡충의 수와 비례하였다. 액상내용물의 삼투질 농도는 부위에 관계 없이 등장성이었다. 장내용물의 부위별 pH, 단백 질량 및 이온의 농도는 정 상에서와 같이 변하고 있었다. 이상의 결과에서 요꼬가와흡충증의 액상 장내용물은 감염으로 소장융모의 길이가 짧아지면서 흡수면적이 감소하고 따라서 장은와의 분비액을 충분히 흡수하지 못하여 형성되는 것으로 생각할 수 있었다. 그리고 이러한 병적상태는 가변성인 것으로 생각하였다.

• Applied Chemistry for Engineering
• /
• v.19 no.2
• /
• pp.214-221
• /
• 2008

The production of biodiesel by transesterification of waste frying oil was conducted on various zeolite catalysts with different acidity and pore structure. $H^+$ ion exchanged MOR, MFI, FAU, and BEA zeolites were employed in the reaction with silicalite which has no strong acid sites. $H^+$ ion exchanged MOR(10) zeolite, which has more acid sites and stronger acid strength than other zeolites, exhibited the highest methyl esters yield as 95%. Dealumination to the HMOR zeolite induced decreasing of acid amount and acid strength. It brought about the decrease of fatty acid methyl esters (FAME) yield. The yield increased linearly with enhancing of acid strength and increasing of amount of strong acid sites. The yields were independent on pore structure of the zeolites.