• 제목/요약/키워드: 바이오파울링

검색결과 6건 처리시간 0.019초

국내 해상풍력발전단지에서의 바이오파울링에 대한 연구 (Study of biofouling in Korea offshore wind farms)

  • 채윤석;김호민;김지형;이성훈
    • 풍력에너지저널
    • /
    • 제14권4호
    • /
    • pp.43-49
    • /
    • 2023
  • We have studied biofouling in Korea's offshore wind farms by using image analysis through monitoring and surface energy analysis. To observe the biofouling characteristics, samples were fabricated using Micron extra 2 and PropOne, which have a self-polishing property, and Hempathane HS 55610, which is used in substructure coatings. The manufactured samples were installed at the bottom of a ladder in a substructure, and monitored for 10 months. The most biofouling occurred in the sample without the self-polishing property, and algae, barnacles and corallinales were observed. The surface energy analysis used the Owens-Wendt-Rabel and Kaelble (OWRK) model, which uses the contact angles of two standard fluids. As a result of calculating the surface energy using contact angle measurement, the sample without the self-polishing property showed the highest value. This result was consistent with the biofouling incidence observed through monitoring.

해수 파울링이 판형 열교환기 성능에 미치는 영향에 대한 고찰 (Study on Effects of Seawater Fouling on a Plate-Frame Heat Exchanger)

  • 허재혁;이동원;김민휘;백원근;윤린
    • 설비공학논문집
    • /
    • 제29권8호
    • /
    • pp.391-400
    • /
    • 2017
  • Understanding of seawater fouling characteristics is critical in designing a heat exchanger adapted in an effluent utilization system for a power plant. We reviewed three types of fouling mechanisms of general, biological, and crystallizing for a plate-frame heat exchanger, to be used for heat exchanging with heated effluent from a power plant. Also, mathematical models for each type of seawater fouling were suggested. Actual thermal resistance calculated from seawater fouling models were compared and implemented in designing a plate-frame heat exchanger. The bio-fouling model revealed the largest thermal resistance and the highest number of plates for a plate-frame heat exchanger under the same heat load. Overall heat transfer coefficient and pressure drop of a plate-frame heat exchanger under fouling conditions was lower by 58 percent and higher by 2.85 times than those under clean conditions, respectively.

항균 및 방오 특성을 가진 은나노 입자 함유 분리막에 대한 총설 (Review on Membranes Containing Silver Nanoparticles with Antibacterial and Antifouling Properties)

  • 김한솔;라즈쿠마 파텔;김종학
    • 멤브레인
    • /
    • 제31권5호
    • /
    • pp.293-303
    • /
    • 2021
  • 물 여과, 단백질 정제 또는 생체 의학 여과 장치에 사용되는 분리막은 여러 가지 이유로 막 파울링을 거치게 된다. 박테리아에 의한 막 표면의 바이오필름 형성은 분리막의 내구성에 심각한 문제를 초래한다. 단백질 정제의 경우, 소수성인 막의 표면으로 인해 막의 기공이 막히게 된다. 분리막의 파울링을 조절하는 방법에는 여러 가지가 있는데, 그 중 하나가 은나노 입자의 도입이다. 은나노 입자의 항균 특성은 잘 알려져 있고 따라서 여러 응용에 사용되고 있다. 본 총설에서는 은나노 입자 또는 그 유도체가 박막 활성층에 도입되거나 또는 복합막 전체에 균일하게 분포된 분리막에 초점을 두었다.

국내 선박부착생물 관리방안에 관한 연구

  • 하신영;박한선;이경미
    • 한국항해항만학회:학술대회논문집
    • /
    • 한국항해항만학회 2019년도 춘계학술대회
    • /
    • pp.236-237
    • /
    • 2019
  • IMO는 MEPC 73차(2018.10) 회의에서 선박부착생물 관리절차, 방오성능, 수중소제, 선체설계 및 교육사항이 구체적으로 명시될 수 있도록 기존 지침의 유효성평가가 승인되었으며 수집된 정보를 바탕으로 관리지침서 개정을 검토하고 있어 향후 선박부착생물 관리 가이드라인도 규제화 될 가능성이 높다. 우리나라는 IMO 선체 부착생물규제 대응하기 위해 외래 유해침임종 관리를 위한 최적을 방안을 도출 할 필요가 있다.

  • PDF

바이오매스 순환유동층 연소에서 CaSO4 환원반응에 의한 파울링 발생 방지 연구 (A Study on Prevention of Fouling Formation by Reduction Reaction of CaSO4 in a Biomass Circulating Fluidized Bed Combustion)

  • 김성주;박성진;조성호;홍세화;문용일;문태영
    • 신재생에너지
    • /
    • 제19권1호
    • /
    • pp.1-11
    • /
    • 2023
  • A large amount of carbon monoxide (CO) is generated in circulating fluidized bed combustion, the process whereby a hot cyclone separates unburned fuel. However, calcium sulfate (CaSO4), when combined with a high CO content, can cause fouling on the surface of the steam tube installed inside the integrated recycle heat exchangers (INTREX). In this study, CaSO4 decomposition was investigated using 0.2-3.2 vol.% CO and 1-3 vol.% oxygen (O2) at 850℃ for 20 min in a lab-scale fluidized bed reactor. The results show that CaSO4 decomposes into CaS and CaO when CO gas is supplied, and SO2 emissions increase from 135 ppm to 1021 ppm with increasing CO concentration. However, the O2 supply delayed SO2 emissions because the reaction between CO and O2 is faster than that of CaSO4; nevertheless, when supplied with CaCO3, the intermediate product, SO2 was significantly released, regardless of the CO and O2 supply. In addition, agglomerated solids and yellow sulfur power were observed after solid recovery, and the reactor distributor was corroded. Consequently, a sufficient O2 supply is important and can prevent fouling formation on the INTREX surface by suppressing CaSO4 degradation.

EGCG/바닐린 코팅 RO분리막의 표면 특성과 미생물막 억제능 (Surface characterization and evaluation of biofouling inhibition of reverse osmosis membranes coated with Epigallocatechin gallate(EGCG)/vanillin)

  • 정재현;김영진;남해욱;김윤중;이은수;이윤일;권지향
    • 상하수도학회지
    • /
    • 제28권6호
    • /
    • pp.713-723
    • /
    • 2014
  • Biofouling in brackish water reverse osmosis (RO) membranes still needs extensive research to understand cause and mechanism and to obtain methods for reduction of its impact on RO applications. Natural compounds with biofilm formation inhibitory properties are being investigated. Two compounds, vanillin and Epigallocatechin gallate (EGCG), were selected due to their great potential on biofilm formation inhibition. Vanillin shows inhibition on quorum sensing mechanisms of biofilm formation. EGCG has potential to inactivate microbial activity. The two compounds were incorporated in typical polyamide reverse osmosis membranes and evaluated on flux behaviours and biofilm formation potential. The surface properties of membrane coated with vanillin were changed tremendously compared to those with EGCG. As a result, the flux was reduced substantially. The biofilm formation seems hindered with EGCG coated membranes compared to the virgin membranes. More research is needed to optimize coating methods applicable to RO membranes and to enhance biofouling reduction.