• Korean Chemical Engineering Research
• /
• v.61 no.1
• /
• pp.8-18
• /
• 2023

Increasing of energy demand due to the rapid growth of global population and the development of world economy has inevitably resulted in the continuously increase of fossil fuel usage in the world. However, highly dependence on fossil fuels has necessarily brought about critical environmental issues and challenges such as severe air pollutions and rapid global warming. In order to settle these environmental and energy problems, clean energy generations in the conventional combustion processes have widely adapted in the world. In particular, novel thermochemical conversion processes such as pyrolysis and gasification have rapidly been applied for generating clean energy. Fluidized bed technologies having advantages such as various fuel use, easy continuous operation, high heat and material transfer, isothermal operation, and lower operation temperature are widely adopted and used because they are suitable for thermochemical energy conversion. The latest research trends and important findings in the thermo-chemical conversion process with fluidized bed technologies are summarized in this review. Also, the need for research such as layered materials and substances to reduce fine dust (biomass, natural resource waste, etc.) was suggested. Through this, it is intended to increase interest and understanding in fluidized bed technology and to present directions for solving future challenges in fluidized bed process technology development.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2015.08a
• /
• pp.97-97
• /
• 2015

전 세계적으로 화석연료의 고갈 및 환경오염 문제를 해결하기 위해 신재생에너지에 대한 관심이 급증하고 있다. 이러한 신재생에너지에는 수소 에너지, 자연 에너지(태양열, 지열 등), 바이오 매스 에너지 등이 포함된다. 이 중 수소 에너지는 지구상에 풍부하게 존재하고 있는 물과 탄화수소로부터 얻어지며, 연소 시에도 다시 물을 형성하여 오염 물질을 배출하지 않는 차세대 무공해 에너지원으로써 주목을 받고 있다. 수소 제조를 위한 공정에는 수증기 개질 공정(steam reforming), 부분 산화(partial oxidation) 및 자열개질(autothermal reforming) 등이 있으며 실제로 생산되는 대부분의 수소는 탄소/수소비(1:4)가 높은 메탄($CH_4$) 가스를 이용한 메탄 수증기 개질 공정(steam methane reforming)을 통하여 제조된다. 이 때 수소 제조의 고효율화 및 저비용화를 위해서는 반응물에 대한 높은 선택도, 고활성도 및 높은 안정성을 갖는 촉매가 반드시 필요하며, 대표적으로 Ni, Pt, Ru 등이 보고되고 있다. 이러한 촉매들은 대부분 세라믹 pellet 형태로 제작되어 왔으나 열전도도가 낮고 물리적 충격에 취약하다는 단점이 존재한다. 따라서 우리는 이러한 단점을 극복하고, 촉매의 활성을 높이기 위하여 다공성 금속 합금 폼을 촉매 지지체로 도입하였다. 또한, 다공성 금속 합금 폼 표면에 촉매의 분산 및 안정성을 향상시키기 위해 지지체와 촉매 사이에 원자층 증착법을 이용하여 inter-layer를 도입하였다. 이들의 구조, 형태, 및 표면의 화학적 상태는 주사전자현미경, EDS (energy dispersive spectroscopy)가 탑재된 주사전자현미경, X-선 회절, 및 X-선 광전자 분광법을 이용하여 규명하였다. 더하여 정전압-전류 측정법 및 유도 결합 플라즈마 분광 분석기을 이용하여 전기 화학 반응을 유도하고, 반응 후 전해질의 성분분석을 통해 촉매와 지지체 간의 안정성을 평가하였다. 따라서 본 결과들은 한국진공학회 하계정기학술대회를 통해 좀 더 자세히 논의될 것이다.

• Particle and aerosol research
• /
• v.10 no.4
• /
• pp.169-176
• /
• 2014

Air samples were collected at various altitudes (from 165 to 1153 m) to observe vertical distribution of particulate PAHs concentrations using a very compact and light particle sampling package developed by Eun et al.(2013). TD-GC-MS developed by Hwang et al.(2014) was applied to PAHs analysis for effective analysis of PAHs contained trace amounts in the samples. The ranges of total PAHs concentrations were from 6.95 to $96.0ng\;m^{-3}$ on the ground and from 3.75 to $21.74ng\;m^{-3}$ at high altitude, respectively. All of particulate PAHs concentrations measured on the ground were higher than those measured at high altitude, while, the profile of individual PAH compounds between the ground and high altitude samples were similar. It means the distribution of particulate PAHs concentrations at high altitude were affected by the emission of PAHs emitted from ground.

• Particle and aerosol research
• /
• v.17 no.4
• /
• pp.125-132
• /
• 2021

Fresh PM_2.5 smokes emitted from combustion of four biomass materials (pellet, palm fruit fiber (PFF), PKS, and sawdust) in a laboratory-controlled environment were characterized using an attenuated total reflectance-fourier transform infrared (ATR-FTIR) technique. In smoke samples emitted from combustion of pellets, PFF and PKS, which is being used as boiler fuels for greenhouses in rural areas, the organic carbon/elemental carbon (OC/EC) ratios in PM_2.5 were very high (14.0-35.5), whereas in sawdust smoke samples they were significantly low (<4.0) due to the combustion method close to flaming combustion. ATR-FTIR analysis showed that OH(3400-3250 cm^-1), CH₃(2958-2840 cm^-1), CH₂(2910 cm^-1 and 2850 cm^-1), ketone(1726-1697 cm^-1), C=C(1607-1606 cm^-1 and 1515-1514 cm^-1), lignin (1463-1462 cm^-1 and 1430-1428 cm^-1) and -NO₂(1360-1370 cm^-1) peaks were identified in all biomass burning (BB) smoke samples. However, additional peaks appeared depending on the type of biomass. Among the four types of biomass materials, an additional peak of the methylene group CH₃(2872-2870 cm^-1) appeared only in PFF and PKS smoke samples, and a peak of C=O(1685 cm^-1) was also confirmed. And in the case of PKS smoke samples, a peak of aromatic C=C(1593 cm^-1 and 1476 cm^-1) that did not appear in other BB samples was also observed. This indicates that the molecular structure of organic compounds emitted during BB differs depending on the type of biomass materials. The results of this study are expected to provide valuable information to more specifically reveal the effect of BB on PM_2.5 collected in the atmospheric environment.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.26 no.2
• /
• pp.75-84
• /
• 2018

In this study, the analysis of torrefaction products was carried out for fueling of sewage sludge. The mixed samples were composed as follows : 50% of sewage sludge and 50% of rice husk and CR(Coffee Residue). In this experiment, the reaction time(30min, 60min) and temperature($200^{\circ}C$, $250^{\circ}C$, $300^{\circ}C$) were expressed as a single variable using SF(Severity Factor). As a result, it was confirmed that as the SF increased, the heating value and fuel ratio increased, but the CI(Combustibility Index) decreased. The heating value was similarly increased as CR(Coffee Residue) and SF increased. The fuel ratio range of mixed samples was equal to that of lignite(0.5~1.0) in case of SF lower than 6.19 and that of bituminous coal(1.0~1.8) in case of SF higher than 7.36 or above. The CI showed a stable range(3,000~5,500kcal/kg) in low SF as the content of mixed samples contained more rice husk than CR.

• Clean Technology
• /
• v.28 no.1
• /
• pp.46-53
• /
• 2022

The agglomeration characteristics of coal and silica sand were investigated under various conditions using mixed samples consisting of coal, silica sand, and potassium hydroxide, which is an agglomeration accelerator. The samples were prepared by either physically mixing or using aqueous solutions. The experiments using the physically mixed powder samples were performed with a two hour reaction time. The results showed that the number of aggregates generated increased as the reaction temperature and the total potassium content increased. The experiments using aqueous solutions were performed at 880 ℃, which is the operating temperature of a fluidized bed boiler, and at 980 ℃, which assumes a local hot spot. The amount of agglomeration generated as the reaction time increased and the total potassium content increased was identified. In the experiment performed at 880 ℃, the amount of aggregate generated clearly increased with the reaction time, and in the experiment performed at 980 ℃, assuming a local hot spot, a large amount of aggregate was generated in a relatively short time. The aggregates became harder as the potassium content increased. When the total potassium content was less than 1.37 wt.%, the aggregates were weak at both temperatures and collapsed even with a slight impact. Additionally, the surface characteristics of the silica sand and ash aggregates were observed by SEM-EDS analysis. The analysis revealed a large amount of potassium at the bonding sites. This result indicates that there is a high possibility of aggregation in the form of a eutectic compound when the alkali component is increased.

• Journal of Climate Change Research
• /
• v.4 no.2
• /
• pp.115-126
• /
• 2013

Recently Korea considers the source of biomass burning emissions reflecting national characteristic, so that includes the inventory of emission source but preceding research is rarely implemented in Korea. Therefore, a study on characteristics of greenhouse gas emissions from biomass burning is necessary and it also makes the source management effectively when the climate-atmospheric management system takes effect. In this study, using the manufactured charcoal kiln and the number of experiment was three times to get a reliable experiment result. The sampling time was decided by changing degree in charcoal kiln and charcoal manufacturing process. The results of calculation greenhouse gas emission factor from charcoal kiln were $668g\;CO_2/kg$, $20g\;CH_4/kg$, $0.01g\;N_2O/kg$. Using the emission factor developed in this study, estimate the emissions from charcoal kiln in Korea. The results of calculation were $46,040ton\;CO_2/yr$, $1,378ton\;CH_4/yr$, $0.69ton\;N_2O/yr$ and greenhouse gas emissions applying GWP are as follows. $CH_4$ emissions was $28,947ton\;CO_2eq./yr$, $N_2O$ emissions was $214ton\;CO_2eq./yr$. As a results, Gross emissions of charcoal kiln in Korea was $75,201ton\;CO_2eq./yr$, but the oak used in this study is included to the biomass so emissions of $CO_2$ are excluded. Therefore the net emissions of charcoal kiln in Korea was $29,161ton\;CO_2eq./yr$.

• Journal of Korean Society of Environmental Engineers
• /
• v.32 no.7
• /
• pp.656-664
• /
• 2010

We investigated the levels and distribution patterns of 16 priority polycyclic aromatic hydrocarbons (PAHs), 12 Coplanar polychlorinated biphenyls (Co-PCBs) and organochlorine pesticides (OCPs) in the surface sediments from the Nakdong river basin, Korea. The levels of 16 PAHs and 12 Co-PCBs in the river sediment samples ranged from not detected (N.D.)~969.3 ng/g-dry, 4.2~7716.5 pg/g-dry (0.0~10.1 pg-TEQ/g-dry), respectively. Also, the levels of 16 PAHs were from 5.8~2987.2 ng/g-dry and 4.3~461.1 pg/g-dry (0.0~0.6 pg-TEQ/g-dry) for 12 Co-PCBs in the lake sediment samples. Only dichloro-diphenyl-trichloroethane (DDT) were detected among target OCPs and the concentration ranged from N.D.~1.5 ng/g-dry in the river sediment samples. These contamination levels were far below the guideline values suggested for environmental quality assessment. Low molecular weight PAHs were dominant in the river sediment samples, while middle and high molecular weight PAHs were dominant among 16 PAHs in the lake sediment samples. PCB-118 and PCB-105 were predominant congeners in the sediment, which were similar to the results obtained from previous studies. With these results, the assessment of potential sources of PAHs and Co-PCBs contamination in the sediments of the Nakdong river basin was performed. The pyrogenic-PAHs originated from combustion of fossil fuel and biomass were related with the PAHs contribution in most of the sediment samples, and Co-PCBs in the sediment samples were related with commercial PCB products.