• 제목/요약/키워드: 밀폐용기

검색결과 125건 처리시간 0.022초

초음파 조직생검 시 실내의 포름알데히드(HCHO) 농도 변화 관찰 (Observation of Changes in Indoor Formaldehyde(HCHO) Concentration during Ultrasound Guided Biopsy)

  • 이훈정;강성진
    • 한국방사선학회논문지
    • /
    • 제15권7호
    • /
    • pp.1057-1064
    • /
    • 2021
  • 본 연구는 초음파 조직검사 시에 실내 공기 중 HCHO 농도변화를 관찰하고자 실제 조직검사와 동일한 환경조건을 모사하여 진행하였다. 초음파 검사실의 밀폐, 환기, 포르말린 용기 개봉, 포르말린 용기 밀봉, 재환기의 다섯 단계를 연속적으로 진행하며 실내의 HCHO 농도변화를 측정하였다. 측정한 HCHO 농도변화는 그래프를 이용하여 시각화하였다. 3회에 걸쳐 측정된 농도 변화값의 일치도를 급내상관계수를 이용하여 분석한 결과, 상관계수 값이 0.989로 통계적으로 유의한 결과를 나타내었다(p<0.05). 연구 결과를 토대로 영상의학적 검사 분야에서 HCHO의 노출 환경 내에 근무하고 있는 의료종사자들 스스로 업무 중 노출 관리 필요성에 대한 인식개선과 더불어 노출 관리를 위한 환경구축 및 대책 마련에 대하여 적극적인 논의가 이루어지길 바란다.

크림 제형 화장품용 스마트 패키징 기술 개발 (Development of Smart Packaging for Cream Type Cosmetic)

  • 전수연;문병근;오재영;강호상;장건;이기성
    • 한국포장학회지
    • /
    • 제25권3호
    • /
    • pp.79-87
    • /
    • 2019
  • 화장품 내용물의 모니터링이 가능한 화장품 스마트 패키징을 제작하기 위하여 화장품 업계 실무자를 대상으로 경험 및 선호도를 조사하였다. 대부분의 설문자가 화장품 사용 시 유통기한 준수를 위해 기한을 확인하며, 보관환경에 의한 화장품 내용물의 변질이 빈번한 것을 확인하였다. 설문조사 결과를 바탕으로 보관환경의 온·습도, 사용빈도, 유통기한, 내용물 제조성분 표시기능을 추가하여 센서·PCB 및 모바일 어플리케이션을 제작하였으며, 기능의 작동성을 확인하였다. 제작한 센서의 고온, 상온, 저온의 3가지 환경조건에서의 작동성능을 확인한 결과, 온도 및 습도가 (±3)℃, (±5)%R.H. 이내로 작동하였고, pH는 (±1) 이내로 측정되어각 환경조건에서 설정한 기준치 이내로 정상 작동하는 것을 확인하였다. 제작한 센서 및 PCB를 적용할 수 있는 스마트 화장품 용기를 설계, 디자인하였고, 제작한 스마트 화장품 용기의 내구성을 확인하였다. 비교적 부피가 큰 센서를 적용하기 위하여 크래들 형태를 적용하였으며, 내용물 용기에 회전토출방식을 적용하여 밀폐성을 높였다. 제작한 화장품 용기의 감압누설, 내열성, 내한성, 낙하, 크로스컷트 시험 결과, 각 시험 후 용기의 변형, creep 현상, 분리, 균열, 파열, 변색 등의 손상이 발생하지 않았으며, 누설 및 작동불량이 발생하지 않았다. 본 연구에서 개발한 화장품 스마트 패키징 용기, 센서 및 어플리케이션을 통해 화장품의 보관환경, 사용빈도 등을 측정할 수 있었고, 측정 정보를 용기의 색변화 및 어플리케이션을 통해 효율적으로 소비자에게 전달할 수 있을 것으로 사료된다. 소비자 UI/UX 디자인 개발을 통한 어플리케이션 및 용기에 대한 연구가 추가적으로 이루어진다면, 상용화를 통한 다양한 화장품 제품군에 적용될 수 있을 것으로 기대된다.

밀폐공간에서 수소 누설로 인한 수소 제트 확산에 대한 수치해석 (THE NUMERICAL SIMULATION OF HYDROGEN JET DIFFUSION FOR HYDROGEN LEAKAGE IN THE ENCLOSED GEOMETRY)

  • 안혁진;이상혁;허남건;이문규;용기중
    • 한국전산유체공학회:학술대회논문집
    • /
    • 한국전산유체공학회 2009년 춘계학술대회논문집
    • /
    • pp.176-182
    • /
    • 2009
  • In the present study, a numerical simulation for the diffusion of hydrogen jet in a enclosure was performed to aid the leakage test of the hydrogen for the safety of the hydrogen vehicle. The temporal and spatial distributions of the hydrogen concentration in the test chamber are predicted from the present numerical analyses. Flammable region of 4-74% and explosive region of 18-59% hydrogen by volume was identified from the present results. Factors influencing the diffusion of the hydrogen jet were examined to evaluate the effectiveness of forced ventilation for relieving the accumulation of the leaked hydrogen gas in the chamber, which include location of open windows, size of leakage nozzle, and leakage rate among others. The distribution of the concentration of the leaked hydrogen for various cases can be used as a database in various applications for the hydrogen safety.

  • PDF

회전하는 원통형밀폐용기내의 아랫면가열에 의한 이중확산대류에 관한 실험적 연구 (Double-Diffusive Convection Due to Heating from Below in a Rotating Cylindrical Cavity)

  • 강신형;이태홍;이진호
    • 대한기계학회논문집
    • /
    • 제19권7호
    • /
    • pp.1731-1740
    • /
    • 1995
  • Experimental investigations have been made to study the double-diffusive nature of convection of an initially stratified salt-water solution due to heating from below in a rotating cylindrical cavity. The objective is to examine the flow phenomena and the heat transfer characteristics according to the changes in temperature gradient, concentration gradient and rotating velocity of cavity. Thermal and solutal boundary conditions at side wall are adiabatic and impermeable, respectively. The top and bottom plate are maintained each at constant temperature and concentration. The cavity is put into a state of solid body rotation. Like the stationary case, the types of initially-formed flow pattern are classified into three regimes depending on the effective Rayleigh number and Taylor number; stagnant flow regime, single mixed-layer flow regime and successively formed multi-mixed layer flow regime. At the same effective Rayleigh number, the number of initially-formed mixed layer and its growth rate decrease as the effect of rotation increases. The temperature and concentration profiles are both uniform in each layer due to convective mixing in the layered-flow regime, but look both liner in stagnant flow regime and single mixed-layer flow regime. At the interface between adjacent layers, the temperature changes smoothly but the concentration changes rapidly.

밀폐된 용기 안에서 동시에 회전하는 디스크의 진동과 안정성에 관한 연구 (Vibrations and Stability of Flexible Corotating Disks in an Enclosure)

  • 강남철
    • 한국소음진동공학회논문집
    • /
    • 제19권1호
    • /
    • pp.76-84
    • /
    • 2009
  • The vibration and stability of thin, flexible corotating disks in an enclosed compressible fluid is investigated analytically and compared with the results of a single rotating disk. The discretized dynamical system of the corotating disks is derived in the compact form of a classical gyroscopic system similar with a single disk. For the undamped system, coupled structure-acoustic traveling waves destabilize through mode coalescence leading to flutter instability. However, it is found that the flutter regions of the corotating disks are wider than those of a single disk. A detailed investigation of the effects of dissipation arising from acoustic or disk damping is also performed. Finally, in the presence of both acoustic and disk dampings, the instability regions are found and compared with those of a single disk. Although this study does not allow a radial clearance between the disk and the enclosure, the computational frame work of the problem can be expanded to the system having the radial clearance in an enclosure.

김치발효 중 가스압력 변화와 압력측정시스템의 개발 (Development of Pressure Monitoring System and Pressure Changes during Kimchi Fermentation)

  • 이영진;전재근
    • 한국식품과학회지
    • /
    • 제22권6호
    • /
    • pp.686-689
    • /
    • 1990
  • 김치의 발효상태를 monitoring할 수 있는 압력측정 sensor와 감시장치를 설계, 제작하였다. 본 시스템은 밀폐형 발효관(31.5 ml)과 strain gauge 타입의 압력 sensor, 741 Op. Amp.와 ADC0809를 사용하여 제작한 신호가공 장치로 구성하였으며 퍼스널 컴퓨터와 접속하여 사용하였다. 배추김치는 플라스틱 용기에 담가 $25^{\circ}C$$30^{\circ}C$에서 발효시켰으며 발효상태는 김치를 넣은 발효관으로 monitoring하였다. 압력곡선 형태의 김치발효 곡선을 얻을 수 있었으며 이는 2단 압력증가 양식을 갖는 김치숙성 곡선을 보여주었다.

  • PDF

밀폐용기내의 물의 저압 증발 최적조건에 관한 실험적 연구 (An Experimental Study on the Water Evaporation Conditions of the Enclosed Tank)

  • 김세현;신유식;이윤환;정한식;정효민
    • 동력기계공학회지
    • /
    • 제8권1호
    • /
    • pp.41-47
    • /
    • 2004
  • Cooling towers are widely used not only for cooling products and equipment in manufacturing process but HVAC(Heating, Ventilation and Air Conditioning) system. As a cooling tower is the terminal apparatus which discharges heat from industrial process, the efficiency of heat exchange in the cooling tower greatly affects to the overall performance of a thermal system. In this paper, we constituted a new water cooling system by using a Latent heat of evaporation in an enclosed tank, and this system is consisted of an enclosed vacuum tank and water driven ejector system. Several experimental cases were carried out for improvement methods of high vacuum pressure and water cooling characteristics. The ejector performance was tested in case of water temperature variations that flows into the ejector. Based on the vacuum pressure by water driven ejector, the water cooling characteristics were investigated for the vaporized air condensing effects.

  • PDF

밀폐공간에서 수소 누설로 인한 수소 제트 확산에 대한 수치해석 (THE NUMERICAL SIMULATION OF HYDROGEN JET DIFFUSION FOR HYDROGEN LEAKAGE IN THE ENCLOSED GEOMETRY)

  • 안혁진;이상혁;허남건;이문규;용기중
    • 한국전산유체공학회지
    • /
    • 제14권2호
    • /
    • pp.32-38
    • /
    • 2009
  • In the present study, a numerical simulation for the diffusion of hydrogen jet in a enclosure was performed to aid the leakage test of the hydrogen for the safety of the hydrogen vehicle. The temporal and spatial distributions of the hydrogen concentration in the test chamber are predicted from the present numerical analyses. Flammable region of 4-74% and explosive region of 18-59% hydrogen by volume was identified from the present results. Factors influencing the diffusion of the hydrogen jet were examined to evaluate the effectiveness of forced ventilation for relieving the accumulation of the leaked hydrogen gas in the chamber, which include location of open windows, size of leakage nozzle, and leakage rate among others. The distribution of the concentration of the leaked hydrogen for various cases can be used as a database in various applications for the hydrogen safety.

감마선 분광법을 이용한 지하수 중의 226Ra 분석 (Analysis of 226Ra in the Groundwater Using the Gamma-ray Spectroscopy)

  • 서범경;이길용;윤윤열;이근우
    • 분석과학
    • /
    • 제16권1호
    • /
    • pp.39-47
    • /
    • 2003
  • 시료 전처리가 필요 없는 감마선 분광분석법을 이용하여 지하수 중의 라듐 ($^{226}Ra$) 분석을 위한 측정법을 확립하였다. 방사평형된 딸핵종을 이용한 라듐의 분석 시 가장 문제가 되는 대기 중 라돈 딸핵종에 의한 바탕계수는 측정함 내부로 질소가스를 흘려주므로써 해결하였고, 라듐과 그 딸핵종들 사이의 방사평형 과정에서 생성된 라돈가스의 용기 외부로의 누출은 밀폐된 알루미늄 용기를 사용함으로써 방지할 수 있었다. 또한 측정용기 내부의 공기층에 의한 방사능 변화정도를 조사하기 위하여 임의로 공기층을 만들어 측정한 결과, 물 속에 녹은 라돈의 공기층으로의 발산에 의한 방사능 변화정도는 통상적인 측정오차인 5% 범위 이내였다. 측정 시 검출기 주위로 질소가스를 흘려줌으로서 대기 중 라돈 딸핵종에 의한 간섭을 제거하였고, 검출하한값을 0.02 Bq/L로 낮출 수 있었다. 이는 최근 US Environmental Protection Agency (EPA)에 의하여 제안된 지하수 중의$^{226}Ra$ Maximum Contaminant Level (MCL)인 0.74 Bq/L보다 충분히 작은 값으로서 감마선 분광법을 이용하여 지하수 중의 라듐을 방사능 농도를 정확히 결정할 수 있다는 것을 확인하였다.

쑥부쟁이속 6종의 새싹채소 발아, 재배 및 저장에 미치는 환경요인의 영향 (Effect of Environmental Factors on Sprout Germination, Growth, and Storage of Six Aster Species)

  • 김지수;조주성;이철희
    • 원예과학기술지
    • /
    • 제33권5호
    • /
    • pp.638-646
    • /
    • 2015
  • 본 연구는 자원식물 종자의 유용성을 증대시키는 방법의 하나로 쑥부쟁이속 6종(가새쑥부쟁이, 눈개쑥부쟁이, 벌개미취, 참취, 해국, 쑥부쟁이) 새싹채소의 최적 생산방법을 개발하고자 수행되었다. 적정 발아조건 구명은 온도(15, 20, 25, $30^{\circ}C$) 및 광조건을 달리하여 종자를 파종한 다음 발아율 조사를 실시하였다. 이후 길이생장 기간은 온도(15, 20, 25, $30^{\circ}C$)를 달리하여 암조건에서 10일간 진행하였다. 적정 녹화기간을 알아보기 위하여 최적의 발아조건과 길이생장 기간 동안 재배한 유묘를 0-3일간 광조건에서 재배하였다. 저장환경 및 기간을 알아보기 위해 최적조건에서 재배한 새싹 채소를 통기구가 있는 용기와 밀폐 용기에 각각 넣은 다음 $4^{\circ}C$$10^{\circ}C$에서 저장하였다. 연구의 결과, 종자는 발아율 조사를 통해 12일 이내에 50% 이상 발아하는 것을 선발하였다. 길이생장은 $20-25^{\circ}C$에서 생육이 우수하였고 최적의 재배기간은 7-9일로 구명되었다. 녹화기간이 길어질수록 길이생장은 지체되었으나, 하배축의 부피생장 및 떡잎의 생육이 왕성해지는 경향을 보였다. 여러 가지 요인을 고려하였을 때, 2일간의 녹화처리가 가장 좋을 것으로 생각되었다. 저장성 실험은 $4^{\circ}C$에서 저장한 밀폐 용기에서 저장성이 좋았으며 부패는 환기에 의해 방지되었으나, 수분함량이 감소하였다. 모든 새싹채소는 $4^{\circ}C$에서 3-6일간 신선도를 유지하였으며, 특히 눈개쑥부쟁이와 쑥부쟁이는 높은 저장성을 가져 $10^{\circ}C$에서도 3일 이상 저장이 가능하였다.