• Proceedings of the KSME Conference
• /
• 2000.11b
• /
• pp.556-561
• /
• 2000

Comprehensive numerical computations are made of side-heated squire cavity which is exposed to time dependent external mechanical forcing. Numerical solutions are acquires to the governing two-dimensional Navier-Stokes equations for a Boussinesq fluid. Time dependent heat transfer characteristics of interior fluid are analyzed to illustrate resonance phenomenon. When system is exposed to pure sinusoidal mechanical forcing, the numerical results disclose that the basic mechanism of resonance of mechanical forcing is same as that of thermal forcing of Ref. [3, 9]. In comparatively small amplitude of mechanical forcing, thermal characteristics of the system are similar to basic system(${\varepsilon}=0$).

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.4 s.119
• /
• pp.398-407
• /
• 2007

In this paper we proposed the tag antenna with a low performance distortion from an attached surface material using the asymmetric dual-arm dipole antenna(ADDA) structure. The tag is designed to exhibit low performance changes when the tag is attached on a target object(the medical litter receptacle, ${\varepsilon}_r=1.7,\;tan\;{\delta}=0.002$). Detail design parameters for the proposed antenna are optimized to maintain a good readable range in free-space as well as on a target object. The size of the optimized antenna is $100\;mm{\times}50\;mm$. The antenna shows the matching bandwidth($S_{11}$< -10 dB) of 3.7 % and the radiation efficiency of 80 % at the operating frequency. Finally we confirmed the readable range of the tag antenna by measurement and it shows about 5.3 m in free space and 5.5 m on the target object.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2005.11a
• /
• pp.433-436
• /
• 2005

The combustion behavior of initiators and can-type ignitor, acting on vacuum pressure, was invested. It was found that if the ignited propellants of a can-type igniter were exposed at certain level of low pressure, it would be burnt improperly or even be extinguished. When we design the can-type igniters for some rocket motor, it is most important that the pressure built-up by the gases which were already burnt inside of the igniter case keep as high as possible. For this purpose, it is recommended that the ignitor case have some strength to produce as much gases as possible before breaking out and the free volume be kept as small as possible.

• Proceedings of the KSME Conference
• /
• 2000.04b
• /
• pp.311-315
• /
• 2000

A numerical investigation is made of time-dependent buoyant convection in a square of a non-Boussinesq fluid. The density-temperature$({\rho}-T)$ relation is modeled by a quadratic function, with the maximum density ${\rho}_M$ at temperature $T_M$. The horizontal walls of the square are insulated, and a pulsating temperature $T_H=T_M+{\Delta}T'\;sin({\omega}{\tau})$ is imposed on the hot vertical sidewall. The temperature at the cold wall $T_c$ is constant. Extensive numerical solutions to the governing Navier-Stokes equations are portrayed. Resonance is identified by monitoring the amplitude of the mid-plane Nusselt number, $A(Nu^*)$. The primary resonance frequency is found by matching ${\omega}$ to the nondimensional basic mode $N_1$ of internal gravity oscillations. Due to the quadratic$({\rho}-T)$ relationship, the effective pulsation frequency for density, $2{\omega}$, is meaningful, which brings forth the secondary resonance frequency, i.e., $2{\omega}=N_1$

• Journal of the Korean Society of Propulsion Engineers
• /
• v.10 no.3
• /
• pp.60-66
• /
• 2006

Notable are the burning rate characteristics of solid propellant burning at extremely high pressure(10000-20000 psia). The burning rate test using closed bomb shows the discontinuous increment around 4000 psia so that the exponent of burning rate(n) is almost double, from 0.4 to 0.8. The pressure-increasing rate of the test motor is about 300 times as high as that of the motor operating at the conventional pressure, less than 2000 psia, is, therefor the burning rate is augmented about 5-50 times. The performance prediction reflecting the pressure-change-rate effect are fairly comparable with the test data at various test conditions.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2008.11a
• /
• pp.273-276
• /
• 2008

A Through Bulkhead Initiation Module(TBIM) has been designed which guarantees the seal property without using O-ring. The TBIM works as the shock wave generated by a donor charge transmits to the acceptor charge. The structural safety of TBIM housing has been calculated via modeling analysis, and the ignition performance has been proved by 10 cc closed bomb test. The reliability analysis has been made using Probit method on the base of performance test results. According to the reliability analysis the bulkhead thickness of TBIM which is the most important design parameter has been determined.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2022.09a
• /
• pp.71-71
• /
• 2022

들깨는 잎은 채소, 종자는 기름과 향신료로 이용하는 특용작물로 국립농업과학원 농업유전자원센터에는 국가등록 3,066자원을 보유하고 있다. 들깨 유전자원의 보존기간과 방법에 따라 종자 활력의 차이가 어떻게 변화했는지 알아보기 위해 농업유전자원센터 보존 중인 들깨 유전자원의 발아율을 조사하였다. 온도는 4도, -18도, 밀폐용기 보관하여 보존한 들깨 종자를 10년 보존 후 발아조사를 수행하였다. 발아환경은 페트리디쉬에 거름종이를 깔아 멸균수로 수분을 공급하고, 종자를 50립씩 2반복 치상 후 20도에서 7일, 14일에 조사하였다. 4도에서 보존한 들깨 577자원은 발아율이 85%이상인 자원이 184자원으로 나타났다. -18도에서 보존한 들깨 725자원은 발아율이 85%이상이 자원이 329자원으로 나타났다. 세계적으로 식물유전자원은행에서 양호한 발아율의 기준으로 85%를 사용하는데, 4도 보존 들깨 유전자원들은 조사한 자원의 32%가 양호하였고, -18도 보존 자원들은 45%가 발아 기준을 만족하였다. 들깨유전자원을 10년 주기로 발아율을 조사한 결과 -18도 보존 종자의 발아율이 4도 보존 종자보다 기준발아율이 13% 우수하였으나 두 처리 모두 85% 기준발아율을 만족하는 자원이 50%이하로 나타났다. 본 연구결과는 들깨유전자원을 4도, -18도에서 장기 보존할 때에 종자 활력 예측 및 활력 모니터링 연구에 도움이 될 것이다.

• Journal of Food Hygiene and Safety
• /
• v.32 no.5
• /
• pp.424-433
• /
• 2017

Antioxidants are used in the manufacturing of commercial food packages made of polyolefin plastic such as polyethylene and polypropylene for the purpose to delay the oxidation reaction of the polymer due to oxygen or traces of ozone in the atmosphere. Additives in plastics may be migrated from the packaging materials into foods, thereby presenting a potential health risk to the consumer. Therefore, it is necessary to determine migration level of antioxidants from food packaging materials to foodstuffs in order to take proactive management. In this study, we have developed a method for the analysis of 10 antioxidants, which are butylated hydroxyanisole (BHA), butylated hydroxytoluene (BHT), Cyanox 2246, 425 and 1790, Irgafos 168, and Irganox 1010, 1330, 3114 and 1076, migrated from the food packaging materials into four food simulants for aqueous, acidic, alcoholic and fatty foods. The antioxidants were determined by reversed-phase high-performance liquid chromatograph-ultraviolet detector with 276 nm after solid-phase extraction with a hydrophilic-lipophilic balance (HLB) cartridge or dilution with isopropanol. The analytical method showed a good linearity of coefficient ($R^2{\geq}0.99$), limits of detection (0.11~0.41 mg/L), and limits of quantification (0.34~1.24 mg/L). The recoveries of antioxidants spiked to four food simulants ranged from 71.3% to 109.4%. The migrated antioxidants in this study were within the safety levels that resulted from the safety assessment by the estimated daily intake to the tolerable daily intake.

• Journal of Sericultural and Entomological Science
• /
• v.50 no.2
• /
• pp.116-121
• /
• 2012

Cordyceps and its allies fungi has been described as a secret medicine that gives eternal youth and a long life. Some species of Cordyceps are sources of biochemicals, such ascordycepin, with interesting biological and pharmacological properties. Hence, it has been studied to uncover its pharmacological effect. We attempted to study the formation of fruiting bodies and to develop means of mass production Korean isolate of Paecilomyces tenuipes has been inoculated into silkworms, where it reproduced using culture container, mini-kit successfully. Culture container, mini-kit is composed of a cylinder-shaped body and lid. The container is made of translucent polyethylene terephthalate. The size of the container is $82{\times}75mm$, reduced by 10 times as compared with the conventional culture kit. The mini kit has many advantages - high culture amount, ability of maintaining optimal humidity, parasite-free cultivation and high-end appearance. With the kit, the optimal cultivation condition is under $22^{\circ}C$, culture period of 53 days. And synnemata of P. tenuipes could be kept fresh for 14 days at the temperature of under $10^{\circ}C$. Therefore, the Min-kit can be used in both ways as a culture container and a packing kit for end-user customers.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.38 no.11
• /
• pp.899-905
• /
• 2014

This paper describes preliminary research conducted for developing a high-efficiency clean large cauldron using the liquid-vapor phase change heat transfer. To improve the isothermal environment of the cauldron, naphthalene and FC-40 were selected as the working fluids to operate well in the temperature range of $100-200^{\circ}C$ and used in experimental investigations of the heat transfer characteristics. A two-phase closed thermosyphon was designed and built to demonstrate the functionality of the working fluids. Startup, boiling, and condensation tests were performed, and the test results were used to examine the possibility of complementary effects of the startup and heat transfer characteristics of the two-phase closed thermosyphon using a mixture of naphthalene and FC-40.