• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.11 no.4
• /
• pp.293-301
• /
• 2013

Borehole Disposal Concept (BDC) was initiated by the South African Nuclear Energy Corporation (NECSA) with the view to improve the radioactive waste management practices in Africa. At a time when geological disposal of radioactive waste is being considered, the need to protect ground water from possible radioactive contamination and the investigation of radionuclides migration through soil and rocks of zone of aeration into ground water has becomes very imperative. This is why the Borehole Disposal Concept (BDC) is being suggested to address the problem. The concept involves the conditioning and emplacement of disused sealed radioactive sources in an engineered facility of a relatively narrow diameter borehole (260 mm). Tanzania is operating a Radioactive Waste Management Facility where a number of spent sealed radioactive sources with long and short half lives are stored. The activity of spent sealed radioactive sources range from (1E-6 to 8.8E+3 Ci). However, the long term disposal solution is still a problem. This study therefore proposing the country to adopt the BDC, since the repository requires limited land area and has a low probability of human intrusion due to the small footprint of the borehole.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2011.10a
• /
• pp.18-18
• /
• 2011

본 연구는 태양초 품질에 미치는 후숙방법과 산광재료의 효과를 구명하기 위하여 2011년 8월부터 2011년 9월 25일까지 충청북도농업기술원 1중 플라스틱 하우스에서 수행하였다. 전처리 방법은 고추 수확 후 벌크(대조구), 하우스 밀봉, 비닐밀봉 등 3처리를 하였으며, 산광재료는 관행(무차광, 대조구), 차광망(35%), 천막지, 백색부직포, 흑색부직포를 건조대 위의 멀칭용 철사에 고정하여 실험을 수행하였다. 고추건조대($6{\times}1.5{\times}0.75(m)$, $L{\times}W{\times}H$)를 각 앵글로 설치하고, 고추 건조기의 건조 깔판을 깔고 고추를 널어 건조하였다. 플라스틱하우스 바닥에는 천막지를 깔고 토양으로부터 습기를 차단하여 고추 건조를 촉진코자 하였다. 고추 전처리 방법은 벌크 건조가 건조기간이 짧고 비상품과율이 낮아 건조 효율이 우수하였으나, 태양초 생산을 위한 전처리 방법으로는 하우스 밀봉이 우수하였다. 산광재료는 백색부직포 처리시 고추의 수분 증발 속도가 대조구보다 뒤졌으나, 다른 처리보다 온도가 높아 건조기간을 단축할 수 있었고, 색택이 우수할 뿐만아니라 상품성도 우수하였다.

• Journal of the Korean Ceramic Society
• /
• v.38 no.2
• /
• pp.158-165
• /
• 2001

고체산화물 연료전지용 밀봉재로서 전지 구성원과 열팽창계수가 유사하고 비젖음성 특성을 가지며 전지 작동온도에서 화학적 안정성을 갖는 밀봉유리를 개발하고자, BaO-Al$_2$O$_3$-La$_2$O$_3$-Ba$_2$O$_3$-SiO$_2$계 유리를 제조하여 조성 변화에 따른 열적 특성 변화와 접합후의 젖음성 및 반응성 등을 조사하였다. 유리망목 형성산화물인 B$_2$O$_3$와 SiO$_2$의 함량비 및 BaO의 망목 형성산화물(B$_2$O$_3$+SiO$_2$)에 대한 함량비 변화에 따른 유리의 열적 특성을 조사한 결과, 0.33~0.71의 B$_2$O$_3$/SiO$_2$함량비하에서 BaO/(B$_2$O$_3$+SiO$_2$)가 0.70일 때 유리의 열팽창계수는 106~111$\times$$10^{-7}$/K 이었으며 이때 연료전지 구성원인 YSZ(yttria stabilized zirconia)와의 열팽창 불일치(thermal expansion mismatch)가 가장 작았다. 또한 이러한 조성의 유리로부터 분말성형체를 제조하여 YSZ에 접합을 시도한 결과, 우수한 접합성 및 비젖음성을 확인할 수 있었으며, 800~8$50^{\circ}C$의 전지 작동온도에서 100시간까지 유지시에도 YSZ와의 계면반응이 일어나지 않음을 관찰할 수 있었다.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.18 no.1
• /
• pp.93-100
• /
• 2016

This research was conducted to determine a pre-germinated herbicides with iron-coated seeds in water and wet hill seeded rice. Days of rice seedling emergence was the faster germination at the application of benzobicyclon > oxadiazon > thiobencarb > butachlor and the sealed iron-coated seeds with pre-germinated seeds> pre-germinated seeds> iron-coated seeds with pre-soaking. The seedling establishment was relatively high in untreated control and benzobicyclon among seed treatments by 63.7% and 75.7%. There was 100% seeds killed of pre-germinated seeds in terms of herbicide phytotoxicity and sealed iron-coated seeds with pre-germinated seeds in butachlor but benzobicyclon was of safe with 2% rice seeds killed. Infant rice seedling height was of 9.2-12.9cm in benzobicyclon and 11.9-16.3cm in untreated control and thus there was relatively normal development and growth at the initial rice seedling.

• Journal of the Korean Society of Safety
• /
• v.12 no.4
• /
• pp.214-219
• /
• 1997

The mechanical seals, which are installed in rotating machines like pump and compressor, are generally used as sealing devices in the many fields of industries. The failure of mechanical seals such as leakage, crack, breakage, fast and severe wear, excessive torque, and squeaking results in big problems. To identify abnormal phenomena on mechanical seals and to propose the proper monitoring parameter for the failure of mechanical seals, sliding wear experiments were conducted. Acoustic emission, torque, and temperature were measured during experiments. Optical microstructure was observed for the wear processing after every 10 minute sliding at rotation speed of 1750 rpm and scanning electron microscopy was also observed. Except for the initial part of every experiment, the variation of acoustic emission was well coincided with torque variation during the experiments. This study concludes that acoustic emission and torque are proper monitoring parameters for the failure of mechanical seals. The intensity of acoustic emission signals is measured in root mean square voltage. Temperature of sealing face will be used as a parallel parameter for increasing the reliability of monitoring system.

• Journal of Radiation Protection and Research
• /
• v.33 no.1
• /
• pp.35-40
• /
• 2008

A distillation tower is one of the important facilities which separates and refines a crude oil stream according to certain boiling points. Its operation efficiency can affect the productivity of a refinery substantially. The objective of this study is to elucidate some operational information on the internal conditions of a distillation tower from a measurement of density profile by using a sealed gamma-ray source and a radiation detector. Gamma radiation counts were measured by a BGO detector positioned diametrically outside the tower-wall, opposite to the gamma source(Co-60) as the detector and the source were lowered concurrently. From the results, structural abnormality of the trays was not found inside the tower. Considering the flow distribution patterns, however, a vapor phase was dominantly formed at the upper part of the tower and a liquid phase at the lower part. From the gamma scanning of the distillation tower, it is anticipated that the gamma absorption technique can be used as an important tool for confirming the structural soundness of trays and investigating flow distribution in refinery facilities.

• Korean Journal of Medicinal Crop Science
• /
• v.4 no.4
• /
• pp.308-313
• /
• 1996

The appropriate drying method in medicinal compounds and color of peony root was that predrying at briquet fire $(40{\sim}60^{\circ}C)$ for 6 hours or more, and then hot air drying at $40^{\circ}C$ during 60 hours. But this method needs too much time in drying. And the method that drying at $40^{\sim}C$ with hot air drying has bad result in color. In case Peony was seld by cutting product, before cutting, the Peony root was retted for 30 min. and sealed for 12 hrs. is good for drying time, Peoniflorin content and commodity.

• The Korean Journal of Mycology
• /
• v.18 no.4
• /
• pp.225-232
• /
• 1990

In order to find an useful condition under which the mutants defective in sexual development could be isolated, the effects of several cultural conditions on the developments of Aspergillus nidulans were examined. Among several conditions found to restrict the asexual sporulation but enhance the sexual process, the interference of aeration by sealing the plates with sealing film was the most useful one for the purpose of mutant isolation. Sealing at any time before 20 hours from inoculation prevented both sexual and asexual process. When the seal was removed after 24 hours, however, the mycelia developed only to sexual organs. Using this properity, the early morphogenic process of sexual development could be easily observed and a number of mutants that showed some defects in the process could be isolated. The mutants were divided into 3 groups, NSD (never in sexual development), BSD (block in sexual development) and ASD (abnormal in sexual development). NSD mutants never produced either the $H{\ddot{u}}lle$ cells or cleistothecia and some produced the asexual organs even when the aeration was restricted. BSD mutants were blocked in the process of $H{\ddot{u}}lle$ cell, cleistothecia, crozier, asci or ascospore formation. ASD mutants had defects in the amount of cleistothecia, time of cleistothecial maturation or color of ascospores.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.21 no.1
• /
• pp.50-53
• /
• 2017

Purpose The change in uniformity due to the decreasement in dose should be known. $^{57}Co$ sealed sources are easy to manage and use as QC sources replacing $^{99m}Tc$. Overlapping sealed sources are expected to show variations in dose due to attenuation between sealed sources. Materials and Methods A total of three experiments were conducted. The first experiment is to observe the change in the degree of senescence of the $^{57}Co$ sealed source. The second experiment is to compare the single source and overlaped source at similar doses. In the third experiment, the sources of different doses were compared on each other to determine the changes due to the attenuation between the overlapping sources. Results The results of the first experiment did not exceed the acceptable range. but each crew showed a difference. There was no statistically significant difference in the measurement of uniformity on second and third experiment Conclusion It is believed that a $^{57}Co$ sealed source can be used as a superimposed source. It is not only economical but also convenient to use. daily uniformity measurements will help reduce scan time and speed up the testing process.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.29 no.5C
• /
• pp.207-215
• /
• 2009

Cemented soils or concrete are usually cured under moisture conditions and their strength increases with curing time. An insufficient supply of water to cemented soils can contribute to hydration process during curing, which results in the variation of bonding strength of cemented soils. In this study, by the consideration of in situ water supply conditions, cemented sand with cement ratio less than 20% is prepared by air dry, wrapped, moisture, and underwater conditions. A series of unconfined compression tests are carried out to evaluate the effect of curing conditions on the strength of cemented soils. The strength of air dry curing specimen is higher than those of moisture and wrapped cured specimens when cement ratio is less than 10%, whereas it is lower when cement ratio is greater than 10%. Regardless of cement ratio, air dry cured specimens are stronger than underwater cured specimens. A strength increase ratio with cement ratio is calculated based on the strength of 4% cemented specimen. The strength increase ratio of air dry cured specimen is lowest and that of wrapped, moisture, and underwater cured ones increased by square. Strength of air dry cured specimen drops to maximum 30% after wetting when cement ratio is low. However, regardless of cement ratio, strength of moisture and wrapped specimens drops to an average 10% after wetting. The results of this study can predict the strength variation of cemented sand depending on water supply conditions and wetting in the field, which can guarantee the safety of geotechnical structures such as dam.