• Proceedings of the Korean Society of Crop Science Conference
• /
• 2021.04a
• /
• pp.81-81
• /
• 2021

• Journal of the Korean Society for Railway
• /
• v.19 no.3
• /
• pp.324-330
• /
• 2016

A magnetic contactor is a switching device widely used for electric circuits. For the operation of magnetic contactors, magnetic coils are essential; these coils create and interrupt the electric circuit. In this paper, the finite element analysis model was developed to reflect the experimental data, and was verified through alteration of the applied voltages and the numbers of turns. Effects of electromagnetic force on the geometrical variations of the facing poles for fixed and moving cores of two magnet coils were investigated. In addition, effects of slope and air gap size between two facing poles on the electromagnetic force were explored through the distribution of the magnetic flux density in the magnetic coils of a push-type solenoid. Through this analysis, the characteristics of the electromagnetic force against the facing poles were explored.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.8
• /
• pp.379-388
• /
• 2016

There are various system defects from weapons manufacturing due to the numerous production processes and various production environments. The first kind of defect is patent defects, which can be detected by visual inspection, functional testing, and existing quality control procedures during the manufacturing process. The second kind is latent defects, which cannot be detected though existing quality management approaches because of the complexity of the system and manufacturing process. To minimize the initial defect problems, environmental stress screening (ESS) is needed to detect the defects, remove them, and improve the product conditions based on the environmental stress conditions of temperature and vibration. We implemented a tool for quantitative ESS effectiveness analysis and profile design automation based on MIL-HDBK-344 and verified it using six scenarios with different temperature stress, vibration stress, and test designs.

• Journal of agriculture & life science
• /
• v.45 no.1
• /
• pp.15-20
• /
• 2011

The objective of this study was to develop allometric equations and stem density and biomass expansion factor for Pinus rigida stands in Muju region. The coefficient of determination of the allometric equations in independent variable (dbh) and dependent variable (biomass) was more than 95% with the exception of leaf (78%) and branch(83%). The total biomass was $102Mg\;ha^{-1}$ ($65.9 Mg\;ha^{-1}$ from stem wood, $9.5Mg\;ha^{-1}$ from stem bark, $19.6Mg\;ha^{-1}$ from branch and $7.0Mg\;ha^{-1}$ from leaf). Biomass distribution ratio of Pinus rigida stands showed the highest in stem wood with 64.6%, followed by the branch with 19.2%, stem bark with 9.3% and the leaf with 6.9%. The results indicated that the stem density $(g/cm^{3})$ and the biomass expansion factor were 0.453 and 1.344, respectively.

• Korean Journal of Ecology and Environment
• /
• v.38 no.1 s.110
• /
• pp.18-29
• /
• 2005

This study was conducted to understand seasonal dynamics of phyto- and zooplankton communities in a shallow eutrophic reservoir (Shingu reservoir) from November 2002 to February 2004. Cyanophyceae dominated throughout the year, except for spring (March ${\sim}$ May) when Bacillariophyceae (Melosira varians) and Chlorophyceae (Dictyosphaerium puchellum) were dominant. The change of dominant species in Cyanophytes occurred in June and December 2003, and the increase of phytoplankton cell density in July and November was observed when the P loading through two inflows was high. In May, Oscillatoria spp. and Aphanizomenon sp. were dominant, but replaced by Microcystis spp. in the end of May. Dominant Microcystis spp. sustained until December and shifted to Oscillatoria spp. and Aphanizomenon sp. TN/TP ratio ranged from 13 to 46 (Avg. $27{\pm}6$) from June to December when cyanobacteria (Microcystis spp.) dominated. Rotifers such as Keratella cochlearis, Keratella valga, Polyarthra spp., Conochilus unicornis, Pompholyx complanata dominated in average 67.8% of the zooplankton community. Abundance of zooplankton was the highest in June 2003, when Pompholyx complanata (12,388 ind $L^{-1}$) was dominant. In May, the significant increase of Conochilus unicornis biomass ($1,048{\pm}28\;{\mu}g\;C\;L^{-1}$) was observed with distinct improvement of transparency ($Z_{eu}/\;Z_m=\;1.1$). These results suggest that the seasonal variation of phytoplankton communities in this reservoir are to be understood as results of multi-interactive factors such as temperature, light condition and nutrients, and small-sized rotifers as important predator.

• Korean Journal of Food Science and Technology
• /
• v.36 no.5
• /
• pp.754-760
• /
• 2004

Physicochemical properties and suitability of domestic wheat varieties for production of sugar-snap cookie were examined. Four kinds of commercially available wheat flour and six kinds of other domestic wheat varieties were tested. Domestic wheat varieties had protein contents ranging 7.7 to 11.5%, alkaline water retention capacity (AWRC) of 54.6 to 65.2%, Pelshenke values of 17 to 31 min, and sedimentation values of 19.6 to 30.8 mL. Peak viscosity range of Korean wheat flours measured by Rapid Visco Analyser was from 134.4 to 346.3 unit. Diameter of cookies fer US soft wheat flour was 7.8 cm and domestic wheat flours ranged from 7.2 to 7.9 cm. Cookie spread factors for Alchanmil, Tapdongmil, and Woorimil flours were higher than those of other flours. Protein content had significantly high correlation coefficient of $r=0.892^{**}$ with sedimentation value, and showed negative correlation with cookie diameter, spread factor, and top grain score. AWRC values had significantly high correlation coefficient of $r=-0.736^{**}$ with cookie diameter. Spread factor of cookie showed positive correlation with top grain score.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.34 no.4
• /
• pp.327-339
• /
• 2001

Community structure of macrobenthos was studied at forty one stations of Hampyung Bay, southwest coast of Korea. Three replicate sediment samples were taken at each station in October 1997, using a van Veen grab (surface area $0.1\;m^2$). The types of surface sediment in the sampling area were muddy sandy gravel between bay mouth and bay proper, and gravelly sandy mud between bay proper and inner bay stations. The particulate organic carbon content in the surface sediment was $0.23\sim0.69\%\;(0.44\pm0.10\%)$. A total of 168 species collected during the study period is composed of 58 of polychaetes, 54 of crustaceans, 34 of molluscs and 22 of miscellaneous. The former two taxa together were accounted for $66.6\%$ of the total number of species. The mean density was $1,168 ind./m^2$, comprising $684 ind./m^2$of molluscs ($58.6\%$), $381 ind./m^2$of polychaetes ($32.6\%$), and $90 ind./m^2$of crustaceans ($13.2\%$). The mean biomass was $358.65 g/m^2$, which is consisted of $302.97 g/m^2$of molluscs ($84.5\%$), $24.20 g/m^2$of echinoderms ($6.7\%$), and $19.16 g/m^2$of crustaceans ($5.4\%$). Major dominant species at the inner stations of the study area was Ruditapes philippinarum with a density of $520ind./m^2$($44.5\%$), and Lumbrineris lontifolia with $183ind./m^2$($15.7\%$), while that at bay mouth stations Pitar indecoroides with $56ind./m^2$. Reticunassa festiva, Heteromastus sp., Praxillella affinis, Chone sp. and Tharyx sp. were at from all stations. Based on the cluster analysis, the macrobenthic community in the bay was classified into five station groups depending on sediment types: Group A, a high gravel content in the sediment; Group B, stations with high mud content from bay mouth to bay proper, Group C, stations with fine and poorly sorted sediment from bay proper to the inner bay. The distribution pattern of the number of species, abundance and biomass is discussed in relation to environmental variables.

• Proceedings of the IEEK Conference
• /
• 2000.09a
• /
• pp.561-564
• /
• 2000

MPEG-4 CELP의 알고리즘은 전송환경에 따라 선택할 수 있는 다양한 전송률을 지원하며 각종 옵션을 추가함으로써 다양한 기능을 부가할 수 있도록 구성되어 있다. 본 논문에서는 MPEG-4 오디오 CELP 부호화기를 VHDL(Very High Speed Intergrated Circuit Hardware Description Language)을 이용하여 구현하였다. MPEG-4 CELP의 부호화 과정을 크게 3부분으로 나누어 LPC 분석부, 코드북 검색부, 비트열 생성부로 나누어 설계하였으며, 내부 메모리의 크기를 줄이기 위하여 중복적인 성격을 갖거나 계산과정에서 나오는 중간 결과 값들을 저장하지 않도록 알고리즘을 최적화하였다. 또 계산 값의 동적 범위(Dynamic Range)가 크거나 정밀도가 요구되는 부분에 대해서는 배밀도(Double Precision) 연산을 사용하여 값의 오차를 줄였다.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2022.04a
• /
• pp.67-67
• /
• 2022

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2022.04a
• /
• pp.56-56
• /
• 2022