• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.31 no.3
• /
• pp.260-269
• /
• 1986

This experiment was conducted to investigate the effect of mulching materials on the emergence rate, root dry weight and grain weight of sesame using variety Poong Nyun Ggae and also their effects on physical properties of soil, evapotranspiration and weed growth on the respective plots were studied. The effect of soil water holding capacity at mulching with polyethylene film and straw increased 5.4%, 2.8% to non-mulched plot respectively. The maximum soil temperature was raised up to 4$^{\circ}C$ by applying clear film and was dropped down to 7$^{\circ}C$ by straw. The minimum soil temperature was raised up to 2$^{\circ}C$ by clear film and was dropped down to 3$^{\circ}C$ by straw. In the early stage, the soil physical properties of clear film mulching were better than those of non mulching, and so was in emergence rate. In the late stage, soil strength was high at non mulching, and soil porosity, soil aeration and water infiltration rate were high at film and straw mulchings. Total root dry weight was great at clear film mulching, and root dry weight was concentrated mainly in the upper 10 cm of soil profile. The amount of weeds collected was the least at black film mulching. There were of little difference in evapotranspiration among treatments. The grain yield of sesame was increased to 57% by polyethylene film and 25% by straw mulching.

• Korean Journal of Environment and Ecology
• /
• v.36 no.6
• /
• pp.662-675
• /
• 2022

This study was intended to investigate and analyze the current status of the plant community structure in order to provide basic data for the systematic conservation and management of the Buxus sinica area appearing on the ridgeline connecting the Gyeokjabong(Mt.) and Keungiljae, on Bogildo Island. In consideration of location characteristics such as density, topography, and direction of B. sinica appearing in the shrub layers, a total of 26 sites were set as the survey area for representative vegetation communities or areas with changes in topography. According to DCA and TWINSPAN, it was classified into 6 communities, namely Carpinus turczaninovii-Deciduous broad-leaved, C. turczaninovii, C. turczaninovii-B. sinica, C. turczaninovii-Evergreen broad-leaved, Q. acuta, and D. trifidus-Q. acuta. The community dominated by C. turczaninovii maintains the status quo for the present moment, however, Q. acuta will dominate the surrounding area in the long term, so Q. acuta has high succesion potential. In the case of the Q. acuta and D. trifidus-Q. acuta communities, Q. acuta, known as the climax species of warm-temperate forests, will maintain dominant status. In a case of B. sinica, the community dominated by C. turczaninovii will remain in good status due to the topographical conditions, but the community dominated by Q. acuta growth difficulties are expected due to the high coverage. In the relationship between environmental factors and vegetation distribution, analysis showed that only soil pH affect vegetation distribution. Furthermore, the soil acidity (pH) was 3.78-5.30, the electrical conductivity was 0.186-0.543 dS/m, and the organic matter content was 2.25-2.89%.

• Journal of the Korean Geotechnical Society
• /
• v.26 no.8
• /
• pp.49-58
• /
• 2010

In this study, in order to investigate the characteristics of secondary consolidation in the soft clay ground, oedometer tests were carried out in a normally consolidated condition, and the consolidation characteristics of the soft clay ground were examined by the Finite Difference Method (FDM) based on the Elasto-Viscous model proposed by Yoshikuni. The consolidation tests adjusted the consolidation load increment ratio(${\Delta}p/p_0$) to 1.0 for the four cases with initial consolidation pressures of 0.8, 1.6, 3.2, and 6.4 kgf/$cm^2$. The long-term consolidation tests were examined by the tests that changed the load increment ratio to clarify the effect of consolidation load increment. Although the numerical analysis was delayed in the primary consolidation process, from the result of the numerical analysis of the laboratory tests, the applicability of the Elasto-Viscous model was verified from the agreement of the secondary consolidation process. Based on the developing of model ground consist of general soft clay, influences of consoliation parameters on the consolidation characteristics were studied by the numerical analysis.

• Journal of the Korean Geotechnical Society
• /
• v.23 no.5
• /
• pp.143-151
• /
• 2007

The factors affecting the geotechnical properties of cemented sands are known to be relative density, cementation level, stress level, and particle characteristics such as particle size, shape and surface conditions. It has been widely accepted that the friction angle of cemented sands is not affected by cementation while the cohesion of cemented sands was significantly influenced by cementation. The cementation that is a critical component of the strength of cemented sands will be broken with increasing confining pressure and great caution is required in evaluating the cohesion of cemented specimens due to their fragilities. In this study, a series of drained shear tests were performed with specimens at various cementation levels and confining stresses to evaluate the strength parameters of cemented sands. From the experiments, it was concluded that the cohesion intercept of cemented sand experiences three distinctive zone(cementation control zone, transition zone, and stress control zone), as the cementation level and the confining stress varies. In addition, for accurate evaluation of the strength parameters, the level of confining stress triggering the breakage of cementation bond should be determined. In this study, the relationship between the maximum confining stresses capable of maintaining the cementation bond intact and unconfined compression strength of the cemented sand was established.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.29 no.1
• /
• pp.27-33
• /
• 2023

An optimized design of the transportation insulated box must be considered to control the thermal damage in order to maintain the fresh condition for temperature-sensitive medicine and frozen food safety. The inside temperature of the insulated box is a natural convection enclosure state, thermal stratification naturally occurs as time passes in case of with outside heat load. The latent heat material (LHM) placement inside the box maintains the target temperature of the product for temperature fluctuations during transport, and LHM application is a common and efficient method. In this work, inside temperature stratification in an insulated box depending on the LHM pack position is numerically simulated and experimented. The insulated box is made up of vacuum insulation panel (VIP), and LHM modules are placed over six faces inside the box, with the same weight. The temperature curves for 72 hrs as experiment results clearly show the temperature stratification in the upper, middle, and lower at the LHM melting time region. However, the temperature stratification state is uniformly changed in accordance with the condition of the upper and lower placement weight of the LHM pack. And also, the temperature uniformity by changed placement weight of LHM has an effect on maintaining time for target air temperature inside the box. These results provide information on the optimized design of the insulated box with LHM.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.21 no.1
• /
• pp.135-148
• /
• 2019

King oyster mushroom(Pleurotus eryngii) is one of the most commercially important mushrooms in Korea. Development of fruit body and disease occurrence are sensitive to environmental conditions such as temperature, humidity, carbon dioxide(CO₂) concentration. The purpose of this study was to investigate the changes in the growth environment of king oyster mushroom by installing Airocide, an air purifier for the purpose of improving mushroom cultivation environment. The results of the environment conditions, identification of pathogenic organisms and pathogenesis during the cultivation were as follows. Airocide operation increased the CO₂ concentration of the cultivation room by more than 400 ppm on average, but the increase of CO₂ concentration at this level had little effect on the quality and growth of fruit body. Operation of the Airocide tended to reduce the air humidity of the cultivation room and required more humidification. In humidifying conditions, the Airocide has the effect of lowering the species and density of bacteria and reducing bacterial symptoms and abnormal fruiting body of mushroom. Pseudomonas sp., the mushroom pathogen, was isolated from the cultivation room without Airocide, resulting in serious disease and loss of yields, so that only about 83% of substrate could harvest normal fruiting bodies. No disease symptom caused by bacteria and fungi in the cultivation room with Airocide. Trichoderma sp., Penicillium sp. and Cladosporium sp. were isolated from all experimental conditions, but did not inhibit fruit growth or caused diseased.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.51 no.6
• /
• pp.75-87
• /
• 2023

This study presents an experimental design for demonstrating the role of nature-based solutions to climate change in the landscape and garden sector. The study suggests spatial strategies for a carbon-neutral society and its role as a cultural industry. This paper describes the use of a low-maintenance garden as part of a strategy for carbon reduction with the goal of protecting the environment and forming a carbon-neutral society. To this end, this study involved the design and construction of a realistic model garden to provide scientific data on the functions, spatial elements, and carbon neutrality of carbon-reducing gardens. The target site is located in the Sejong National Arboretum. The test area in which the carbon-reducing function is measured is located in the centre of the site, and other spaces include dry gardens, community gardens, and flower gardens intended for exhibition and relaxation. The experimental area is divided into several smaller areas within which the carbon-reducing effect is analysed according to the amount of biochar installed, the planting density, and the plant species present. The application of facilities and construction methods to promote carbon reduction were based on the method known as '10 types of carbon gardening for the earth'. In the model garden, we employed rainwater utilization facilities and used low-carbon certified wood and local materials. The carbon reduction effect of each facility and construction method is compared and presented here. The results are expected to serve as an important basis for realizing a carbon-neutral society and can be used as a reference in various fields that require sustainable development, such as the garden industry.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.23 no.1
• /
• pp.82-96
• /
• 2024

While analyzing traffic flow, speed, traffic volume, and density are important macroscopic indicators, and acceleration and spacing are the important microscopic indicators. The speed and traffic volume can be collected with the currently installed traffic information collection devices. However, acceleration and spacing data are necessary for safety and autonomous driving but cannot be collected using the current traffic information collection devices. 'You Look Only Once'(YOLO), an object recognition technique, has excellent accuracy and real-time performance and is used in various fields, including the transportation field. In this study, to measure acceleration and spacing using YOLO, we developed a model that measures acceleration and spacing through changes in vehicle speed at each interval and the differences in the travel time between vehicles by setting the measurement intervals closely. It was confirmed that the range of acceleration and spacing is different depending on the traffic characteristics of each point, and a comparative analysis was performed according to the reference distance and screen angle to secure the measurement rate. The measurement interval was 20m, and the closer the angle was to a right angle, the higher the measurement rate. These results will contribute to the analysis of safety by intersection and the domestic vehicle behavior model.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.12 no.2
• /
• pp.73-80
• /
• 2007

The chum salmon enhancement program in Korea started at Gowon in Hamgyeong nam-do in 1913 and the program has been more active since Yeongdong Inland Fisheries Research Institute was established at Yangyang in 1984. The major activities were the release of chum salmon fingerlings and the catch of adult chum salmon for artificial fertilization. The range of return rate to Korean waters was in $0.72{\sim}1.57%$ during 1990s, but it has declined seriously since 2000. To overcome the low return rate and enhance chum salmon resources in Korean waters, we must understand the mechanisms of mass mortality of chum salmon during their early life in rivers and coastal areas in conjuction with the fluctuation of return rates and climate. In addition, comprehensive and effective habitat protection and restoration policies will be needed.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.37 no.1
• /
• pp.9-16
• /
• 2024

Using the proper orthogonal decomposition (POD) based intrusive reduced order model (ROM), the total degrees of freedom of the structural system can be significantly reduced and the critical time step satisfying the conditional stability increases in the explicit time integrations. In this study, therefore, the changes in the critical time step in the explicit time integrations are investigated using both the POD-ROM and Voronoi-cell lattice model (VCLM). The snapshot matrix is composed of the data from the structural response under the arbitrary dynamic loads such as seismic excitation, from which the POD-ROM is constructed and the predictive capability is validated. The simulated results show that the significant reduction in the computational time can be achieved using the POD-ROM with sufficiently ensuring the numerical accuracy in the seismic analyses. In addition, the validations show that the POD based intrusive ROM is compatible with the Voronoi-cell lattice based explicit dynamic analyses. In the future study, the research results will be utilized as an elemental technology for the developments of the real-time predictive models or monitoring system involving the high-fidelity simulations of structural dynamics.