• 한국직업건강간호학회지
• /
• 제29권2호
• /
• pp.106-113
• /
• 2020

Purpose: This study aimed to analyze industrial accident compensation insurance coverage and industrial accidents among concrete mixer truck drivers. Methods: Original data on industrial accidents from 2012 to 2017 were analyzed through descriptive statistics. Results: Industrial accident compensation insurance coverage was 44.6% in 2017. Most concrete mixer truck drivers were affiliated with small businesses. A total of 61 industrial accidents occurred in 2012, 65 in 2014, and 80 in 2017. The major types of industrial accident were falls, slips, and crushes. Conclusion: Because concrete mixer truck drivers are at high risk for industrial accidents, industrial accident compensation insurance coverage and industrial accident prevention should be strongly enforced.

• 한국정밀공학회지
• /
• 제10권2호
• /
• pp.22-29
• /
• 1993

A remote control system was developed in order to operate by push-buttons the conventional drum and chute components, which have been operated manually, in a concrete mixer-truck. As actuators, a hydraulic power unit was used for chute operations: two DC motors for drum operations. The devised drum controller consisted of three electric circuits : an analog proportional-integral control circuit, a drum acceleration circuit, and an emergency stop circuit. The remote control system was installed to be tested experimentally and then was evaluated to work successfully with a desirable accuracy.

• 한국직업건강간호학회지
• /
• 제28권1호
• /
• pp.44-52
• /
• 2019

Purpose: This study aimed to identify the level of health problems and the factors that affect health problems for concrete mixer truck divers. Methods: The questionnaires were administered to 111 drivers in 6 Remicon workplaces located in D city and 7 Remicon workplaces located in K city from September 10 to 28, 2018. A total of 111 questionnaires were collected and 106 were used, excluding 5 incomplete ones. Data were analyzed with frequency, percentage, $x^2$ test, multiple logistic regression analysis by SPSS/WIN 23.0. Results: The factors affecting subjective health were eating habits, sleeping hours and drinking conditions. The factors that affected chronic diseases were age, eating habits, sleep hours, and drinking conditions. The factors influencing musculoskeletal complaints were work experience, eating habits, and sleep hours. Conclusion: The major influencing factors of health problems were eating habits, sleeping hours. This study suggests that it is necessary to run a systematic health care program for the desirable health behaviors in the communities and industrial fields.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2017년도 춘계 학술논문 발표대회
• /
• pp.82-83
• /
• 2017

The samll-medium sized cities do not have enough infrastructure for the construction work, especially in terms of concrete supply. This research surveyed the capacity of remicon companies in Gunsan related with production and delivery. Their production capacity is bigger than the daily quantity required, however the delivery capacity is not enough to supply the daily quantity required and it is inevitable to use the several remicon using different admixture. It might cause the harm to the structure. This research studied the way to remove the quality risk when using different admixture at the same time.

• 드라이브 ㆍ 컨트롤
• /
• 제14권1호
• /
• pp.1-7
• /
• 2017

The power train of a concrete truck mixer reducer includes differential planetary gears to get a large reduction ratio for operating the mixer drum in a compact structure. These differential planetary gears are a very important part of the mixer reducer where strength problems are the main concern. Gear bending stress, gear compressive stress and scoring failure are the main concerns. Many failures in differential planetary gears are due to the insufficient gear strength and resonance problems caused by major excitation forces such as gear mating failure in the transmission. In the present study, where the excitation frequencies are the gear tooth passing frequencies of the mating gears, a Campbell diagram is used to calculate differential planetary gear critical speeds. Mode shapes and natural frequencies of the differential planetary gears are calculated by CATIA V5. These are used to predict gear resonance failures by comparing the working speed range with the critical speeds due to the gear transmission errors of the differential planetary gears.

• 콘크리트학회지
• /
• 제14권4호
• /
• pp.40-48
• /
• 2002

콘크리트는 시멘트의 수화반응으로 시간이 경과하면 굳어지게 되는 물질이다 따라서 레미콘 생산시 기기 및 장비 등에 고착된 콘크리트는 가수 혼합 등으로 분해가 불가능하므로 일단 콘크리트의 제조 및 운반작업이 종료된 후에는 즉시 세척하여야만 한다. 특히 레미콘 생산 현장에서와 같이 대량의 콘크리트를 제조할 경우에 있어, 일단의 콘크리트가 생산완료된 후 레미콘 트럭의 드럼내ㆍ외부 및 배치플랜트의 믹서ㆍ호퍼 등의 세척은 후속콘크리트 제조시 배합비의 정밀을 기하거나, 장비의 보존을 위하여 반드시 필요하게 되는데, 이때 발생하는 세척배수에서 골재를 제거한 것을 회수수라 한다.(중략)

• 한국기계가공학회지
• /
• 제19권12호
• /
• pp.34-41
• /
• 2020

Ready-mixed concrete is unconsolidated concrete typically transported to construction sites by using mixer trucks. A proper rotation of concrete is necessary to prevent its solidification in mixer trucks during transport: in accordance with the manufacturing method and quality inspection prescribed in KSF4009, this movement is maintained after the manufacturing of concrete in professional production plants and the addition of water, solid materials, and admixtures. Unfortunately, mixer truck parts wear out over long periods of time. In order to improve the wear resistance of the main part of mixer trucks, we used a steel plate with good wear resistance or partially added a reinforcement plate. In this study, we first tested the properties of concrete (as required for the DEM), and then carried out mixing and discharge simulations to define the actual operating conditions of mixer trucks. For each condition, we calculated the amount and location of wear. The reliability of our results was finally verified by comparing them with the measurement values. Overall, this study provided basic data for an optimal design of mixer trucks: one that would reduce the vehicles' weight and production costs.

• 콘크리트학회논문집
• /
• 제17권1호
• /
• pp.105-112
• /
• 2005

트럭믹서 및 배쳐 플랜트 세척으로 발생되는 회수수를 안정화시켜 재이용하는 것은 콘크리트의 품질 불안정을 해소하고 강도 향상의 효과를 기대할 수 있기 때문에 이의 활용방안에 대한 적극적인 검토가 요구된다. 본 연구에서는 우리나라의 레미콘 생산 조건에서 사용 가능한 안정화제의 종류를 도출하고자 이를 사용한 회수수 중의 고형분 성상에 대하여 실험?고찰하였다. 실험결과, 회수수 전용 안정화제인 옥시칼본산계 지연제의 고형분량 감소가 상대적으로 우세하였다. 다만, 잉여 반응량에 의해 시멘트 페이스트의 응결지연이 관찰되었으나 레미콘 적용상 저해되는 수준은 아니었다. 안정화제를 혼입한 회수수를 방치함에 따른 영향에서는 초기의 응결지연 효과가 7${\~}$8일 정도에서 상수도수만을 사용한 수준으로 회복됨을 알 수 있었으며, 2${\~}$3일 정도에 안정화 회수수를 사용하는 것이 효과적임을 확인할 수 있었다. 한편, 국내산 당류계 초지연제 역시 유사한 효과를 보여 적용성이 높은 것으로 파악되었다. 시판되는 회수수 안정화제는 수입에 의존하고 있으므로 사회비용의 절감을 위해 안정화제의 국산화가 시급하며 가능한 안정화제의 다각적인 사용성 검토가 긴요하다 할 것이다.