• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.34 no.6
• /
• pp.569-577
• /
• 2010

A multiscale particle simulation technique that can be applied to a multiphase fluid system has been developed. In the boundary region where the macroscopic- and microscopic-scale models overlap each other, three distinctive features are introduced in the simulation. First, a wall is set up between the gas and liquid phases to separate them and match the phases respectively to the macroscopic conditions stably. Secondly, the interfacial profile is obtained near the matching region and the wall translates and rotates to accommodate the change in the liquid-vapor interfacial position in the molecular model. The contact angle thus obtained can be sent to the macroscopic model. Finally, a state of mass and temperature in the region is maintained by inserting and deleting the particles. Good matching results are observed in the cases of the complete and partial wetting fluid systems.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.25 no.12
• /
• pp.1933-1943
• /
• 2001

A micromechanical model is presented for superplasticity in which heterogeneous microstructures are coupled with deformation behavior. The effects of initial distributions of grain size, and their evolutions on the mechanical properties can be predicted by the model. Alternative stress rate models such as Jaumann rate and rotation incremental rate have been employed to analyze uniaxial loading and simple shear problems and the appropriate modeling was studied on the basis of hypoelasticity and elasto-viscoplasticity. The model has been implemented into finite element software so that full process simulation can be carried out. Tests have been conducted on Ti-6Al-4V alloy and the microstructural features such as grain size, distributions of grain size, and volume fraction of each phase were examined for the materials that were tested at different strain rates. The experimentally observed stress-strain behavior on a range of initial grain size distributions has been shown to be correctly predicted. In addition, the effect of volume fraction of the phases and concurrent grain growth were analyzed. The dependence of failure strain on strain rate has been explained in terms of the change in mechanism of grain growth that occurs with changing strain rate.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.36 no.8
• /
• pp.734-739
• /
• 2008

In this study, the nonlinear mechanical behavior of flexible textile composites was predicted by two-step analyses: micromechanics and mesomechanics. The effective material properties for fiber tows of flexible textile composite lamina were calculated in micromechanics, which were then used to calculate the effective tensile stress-strain curve of flexible textile composites in mesomechanics. A user defined material algorithm was developed and inserted in ABAQUS to account for the geometric non-linearity due to the large rotation and shear deformation of fiber tows in mesomechanics. It was found that the stress-strain behavior of flexible textile composites exhibited significant non-linearity. The effective tensile modulus agreed well with the test result.

• KDI Journal of Economic Policy
• /
• v.19 no.4
• /
• pp.3-46
• /
• 1997

본 논문은 우리나라 저축률(貯蓄率)의 결정요인을 실증적으로 분석하는 데 목적을 두고 있다. 특히 본 논문은 생애주기가설/항상소득가설(生涯週期假說/恒常所得假說)에 바탕을 두고 거시(巨視)시계열자료와 미시(微視)횡단면자료를 모두 분석함으로써 개별경제주체의 저축행위와 경제전체의 저축간의 일관된 관계를 밝히려고 하였다. 표준적인 생애주기가설/항상소득가설에 의하면, 저축은 소득(所得)의 일시적 변동으로부터 소비(消費)를 독립시키려는 개별소비자의 합리적 선택의 결과이다. 따라서 개별소비자의 저축은 단기적으로는 소득이 일시적으로 높은 해(년(年))에, 그리고 보다 장기적으로는 일생동안 가장 높은 수준의 소득을 벌게 되는 장년기간중에 가장 크게 된다. 본 논문의 실증결과는 이러한 생애주기가설/항상소득가설의 예측이 실제자료와 대체로 일치함을 보여준다. 거시자료 분석결과에 의하면 우리나라 저축률의 연간변동은 소득성장률(所得成長率)과 인구연령구조(人口年齡構造)의 변동에 의해서 잘 설명되는 것으로 나타난다. 또한 미시자료 분석결과를 보더라도 소득이 일시적으로 높은 가계나 경제활동연령인구의 비중이 높은 가계일수록 더 많은 저축을 하는 것으로 나타난다. 따라서 생애주기가설/항상소득가설은 우리나라 저축률의 결정을 설명하는 데 매우 유용하다고 판단된다. 본 논문은 또한 소득성장률이나 연령구조 외에 이자율, 유동성 제약, 그리고 예비적 저축동기 등이 저축에 미치는 영향에 대해서도 살펴보았다. 실증결과에 의하면 실질이자율은 저축률을 다소 증대시키는 효과가 있으나, 기타 요인들의 효과는 유의하지 않은 것으로 나타났다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2011.05a
• /
• pp.198-202
• /
• 2011

과거의 하천은 이 치수에 주목적을 두고 하천정비를 실시하였으며, 이 때문에 하천은 직선화되거나 하천구조물을 설치하여 원래의 고유한 특성을 상실한 채 자연적인 모습을 찾아보기 어려운 상황에 이르렀다. 과거와 같은 하천의 난개발은 하천 생태계를 교란하였으며, 하천을 서식처로 삼고 살아가던 많은 동식물이 하천환경의 변화와 파괴로 인해 사라졌거나 생존을 위협받고 있다. 그러나, 최근에는 이러한 하천환경을 과거와 같이 생물의 종다양성이 풍부한 곳으로 만들기 위한 노력이 하천 개발과정에서 다양하게 전개되고 있으며, 이를 위한 연구도 진행되고 있다. 본 연구에서는 하천환경에서 어류의 서식처 보전을 위한 하천유지유량을 산정하기 위해 2차원 생태모델인 River2D 모형을 섬진강 송정지점을 대상으로 하여 적용하였다. 모형의 적용을 위해 송정지점에서의 대표어종을 선정하였으며, 서식처 특성 파악을 위해 하천 수리 및 하도특성을 조사하였다. 조사된 결과를 이용하여 River2D 모형을 구축하였으며, 구축된 모형을 이용하여 송정구간에서 대표어종인 피라미와 갈겨니의 서식처 보전을 위한 생태학적 하천유지유량을 추정하였다. 생태학적 하천유지유량은 모델의 결과와 실제 도입 가능수량 등을 검토하여 최종적인 하천유지를 결정하였으며, 그 결과 송정구간은 $7.0\;m^3/s$이상으로 산정되었다. 본 연구에서는 미시서식처 모형에 의해 생태유지유량을 산정하였으나, 진정한 의미의 생태학적하천유지유량은 수리수문학적 특성뿐만 아니라 생화학적 특성을 고려한 거식적인 관점에서 검토하여야 할 것이다.

• The Journal of the Korea Contents Association
• /
• v.15 no.12
• /
• pp.326-335
• /
• 2015

The purpose of this study aimed to examine the effects of ecological systems factors on childhood depression. A total of 2,119 children data from 2013 Korean Children & Youth Panel Survey(the fourth wave)were used in this study. The results of hierarchical regression showed the most ecological systems factors; organisms(child's gender, aggressiveness, attention problems), microsystems(parental neglect, parental abuse, good relationships with friends), exosystem(supportive community environment); had effects on depression. The most influential factors were child's aggressiveness, parental abuse, good relationships with friends, supportive community environment. Finally, this study suggested some implications for practical intervention and further research in childhood depression.

• Journal of Welding and Joining
• /
• v.17 no.4
• /
• pp.60-68
• /
• 1999

The previously developed two dimensional model was modified in order to predict more accurately the degree of microsegregation and eutectic fraction on in weld metal whose solidification rate is very fast. The model employed the same assumptions with previous model but considered of a tip undercooling. The previously predicted microsegregation and eutectic fraction has the discrepancies between simulated and examined results in the weld metal solidification. The experiments for the weld metal solidification of 2024 A1 and Fe-Ni alloy were carried out in order to examine the reasonability and feasibility of this modified model. The concentration profile of the solute and eutectic fraction predicted by the simulation agreed well with those found from experimental works. According to the results, it was believed that the dendrite tip undercooling considered in the modified model be reasonable for predicting the degree of microsegregation more accurately in weld metla solidification. In the GTA welds, degree of dendrite-tip undercooling increases with increasing solidification rage(welding speed). This serves to increase the concentration of dendrite core and thus result in reducing the degree of segregation. And solid state diffusion(back diffusion) during solidification is very low in the weld metal solidification so that little additional homogenization of solute occurs during solidification. With consideration of tip undercooling this modified model can predict exactly degree of microsegregation and eutectic fraction from slow solidification(casting) to fast solidification(welding).

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2011.04a
• /
• pp.127-130
• /
• 2011

본 연구에서는 나노입자와 고분자 기지 간에 공유결합을 형성시킨 나노복합재의 계면특성과 탄성계수에서 나타나는 크기효과를 고려하기 위해 분자동역학과 미시역학모델을 순차적으로 연계하는 멀티스케일 해석모델을 제안하였다. 나노입자의 체적분율이 동일한 5개의 나노복합재 셀에 대해, 입자의 표면 원자와 고분자 기지 간에 탄소로 구성된 공유결합을 생성시킨 후 분자동 역학 전산모사를 통해 탄성계수를 예측하였고, 공유결합이 존재하지 않는 나노복합재의 탄성계수와 이를 비교하여 계면의 물성증가와 탄성계수에서 나타나는 입자의 크기효과를 규명하였다. 향상된 계면의 특성을 연속체 해석 모델에서 고려하기 위해 분자동역학 해석결과와 미시역학 모델을 연계하는 순차적 브리징 기법을 적용하였고, 이로부터 계산된 계면의 물성의 타당성을 유한요소 해석을 통해 검증하였다. 그 결과 입자와 기지 간 공유결합을 통해 나노복합재가 보다 넓은 범위에 걸친 크기효과를 나타냈으며, 제안된 브리징 모델을 통해서 물리적으로 타당한 계면의 탄성계수 값을 계산할 수 있었다.

• KIEAE Journal
• /
• v.14 no.5
• /
• pp.123-130
• /
• 2014

In order for effective heat island reduction policies to be proposed, this research made use of the land usage and land coverage and Temperature of cities, Coordinate axis data within 500 meters of nationwide automatic weather stations (478 points) in order to analyze the correlation of summertime temperatures through multiple regression analysis. This research also developed a model and empirically analyzed the urban heat island reduction effect of factors that affect regional temperatures. Heat islands cause environment deterioration and therefore can harm citizens' health, and also affects the city's metabolism process. Thus in order to restrain regional temperature rises the conclusion was drawn that consideration to increase forest areas on part of land usage planning is needed. Appropriate policy measures to regulate traffic related factors are also needed to restrain regional temperature rises. In order for future heat island reduction this research proposes a way to set up more effective policies and urban sustainability improvement strategies, and is significant in that it makes use of detailed data such as land usage and land coverage, Temperature of cities, Coordinate axis in analyses.

• Korean Chemical Engineering Research
• /
• v.61 no.1
• /
• pp.116-122
• /
• 2023

We study the relationship of entropy with the properties of molecules and also with the macroscopic specifications of the system, i.e., component and phase. Understanding different viewpoints of classical mechanics and quantum mechanics for the indistinguishability of molecules belonging to the same component, we discuss a few thermodynamic systems in which the properties of molecules are to be consistent with the component as a macroscopic term of classifying the molecules. With a clear definition of thermodynamic microstate, the drawback of the Boltzmann statistics caused by the distinguishability of molecules is avoided, and the Gibbs paradox of entropy consequently disappears. Corresponding to the characteristics of fluid and solid phases, we investigated the effects of the indistinguishability and the symmetry number of molecules and the number of microstates realized in time on the partition function and the entropy. In particular, we show that crystalline solid can be regarded as a system which does not satisfy the ergodic hypothesis.