• Journal of Adhesion and Interface
• /
• v.21 no.4
• /
• pp.135-142
• /
• 2020

Recently, people's interest in eco-friendly plastics derived from nature to replace petroleum-based plastics is increasing due to environmental problems such as microplastics. In line with this trend, eco-friendly adhesives using natural materials and processes are also being developed in the adhesive field. Among them, maltose is a natural substance derived from starch and is the main component of starch syrup used as a food additive. Due to its lower molecular weight than starch, it is easily soluble in water, and above all, there is a possibility that it can be copolymerized with other monomers through solution polymerization. However, researches related to the application of maltose to adhesives are very rare. In this study, after modifying maltose using acrylic anhydride, the product was analyzed through FT-IR and H-NMR. And the modified maltose was copolymerized with two kinds of acrylic monomers. The synthesized adhesive was applied on the wood and the adhesive performance were investigated.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.33 no.2
• /
• pp.81-93
• /
• 2020

The fatigue characteristics of glass fiber reinforced plastic (GFRP) composites were studied under repeated loads using the finite element method (FEM). To realize the material characteristics of GFRP composites, Digimat, a mean-field homogenization tool, was employed. Additionally, the micro-structures and material models of GFRP composites were defined with it to predict the fatigue behavior of composites more realistically. Specifically, the fatigue characteristics of polybutylene terephthalate with short fiber fractions of 30wt% were investigated with respect to fiber orientation, stress ratio, and thickness. The injection analysis was conducted using Moldflow software to obtain the information on fiber orientations. It was mapped over FEM concerned with fatigue specimens. LS-DYNA, a typical finite element commercial software, was used in the coupled analysis of Digimat to calculate the stress amplitude of composites. FEMFAT software consisting of various numerical material models was used to predict the fatigue life. The results of coupled analysis of linear and nonlinear material models of Digimat were analyzed to identify the fatigue characteristics of GFRP composites using FEMFAT. Neuber's rule was applied to the linear material model to analyze the fatigue behavior in LCF regimen. Additionally, to evaluate the morphological and mechanical structure of GFRP composites, the coupled and fatigue analysis were conducted in terms of thickness.

• Clean Technology
• /
• v.30 no.1
• /
• pp.1-12
• /
• 2024

Nanoplastics (NP) exhibit distinct material properties compared to microplastics (MP), necessitating their separate recognition. Review of research outcomes and policy documents on NP reveals that most policy frameworks predominantly define MPs as solid synthetic polymer materials measuring 5 mm or less, but do not distinguish them from NP. However, recent revisions in regulations by the EU classify NPs as particles that range in size from 1 to 1,000 nm, as confirmed by some academic studies. Research on NPs often relies on experimental investigations centered around water systems, with a focus on high-concentration experimental conditions using spherical polystyrene-based NPs in behavior and impact studies. Notably, the environmental behavior characteristics of NP show differences in influence depending on the NP type, emphasizing the need for field simulation research. These challenges are mirrored in Korean society, so it is necessary to redefine NP to be distinct from MP in both research and policy. This study aimed to assess the current state of NP management globally and domestically and highlight policy considerations and issues in the existing response to NP. Upon comprehensive review, it becomes apparent that reaching an international agreement on MP faces methodological limitations, which could potentially burden efforts to precisely define NP size. Therefore, referencing the EU's recent regulatory revisions is crucial in domestic policy. Specific adjustments should commence from the MP concept through insights from the domestic industry, guidance from the academic community, and thorough discussions to ensure social acceptance.

• Journal of Convergence for Information Technology
• /
• v.9 no.6
• /
• pp.211-217
• /
• 2019

In this study, the change of skin condition was analyzed by skin analysis equipment using scrub cosmetics, and the morphological characteristics of microbead were observed by dermascope and scanning electron microscope. In the dermascope observation, during the process of cleansing, the microbeads attached to the skin existed in close contact with each other or dispersed. The skin after scrubbing was clean and smooth and the fine wrinkles between epidermal keratinocytes were reduced. In the scanning electron microscopic observation, the microbead surface did not have severe bending or rough surface. The skin moisture and oil content were higher than the scrub skin before the scrub, and there was no significant difference in the pH.

• Journal of Korean Society of Water and Wastewater
• /
• v.36 no.2
• /
• pp.97-106
• /
• 2022

Recently microplastic (MP) biofilm is being attracted as an important environmental issue because it can act as a pollutant carrier in aqueous system. Therefore, this study investigated the MP biofilm communities originated from freshwater. The results showed the bacterial community structure of MP biofilm was distinctively different from the freshwater regardless of biofilm-forming condition and MP type. For MP biofilm communities exposed to raw freshwater, Solimonas variicoloris-like microbe, Frigidibacter albus-like microbe, Nitrospirillum amazonense-like microbe, and Pseudochroococcus couteii-like microbe became abundant, while Acinetobacter johnsonii, Macellibacteroides fermentans, and Sedimentibacter acidaminivorans-like microbe were found as major bacteria for MP biofilm communities exposed to organic rich condition. The results of this study suggest that the unique freshwater biofilm community could be formed on the MP surface.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.10 no.3
• /
• pp.293-299
• /
• 2022

Recently, various stakeholder are interested in microplastic to cause pollution of the marine's ecosystem and effort to conduct study of product's life cycle to reduce pollution of marine's ecosystem. The micorplastic refer to materials of the nano- to micro- sized units and it can be classified into primary and secondary. The primary microplastic mean the manufactured for use in the specific field such as the microbead of the cosmetic or cleanser. also, secondary mean the unintentionally generated during use of the product such as the textile crumb by the doing the laundry. Tire and Road Wear Particles(TRWPs) are also defined as secondary microplastic. Typically, TRWPs are created by friction between the tread compound's rubber of the tire and the surface of the road du ring the driving cars. Most of the generated TRWPs exist on the roadside and some of them were carried to marine by the rainwater. In this study, we perform the quantitative analysis of the TRWPs existed in fine dust at the roadside. So, we collected the dust from the roadside in Chungcheongnam-do's C site with a movement of 1,300 cars per the hour. The collected samples were separated according to size and density. And shape analysis was performed using the Scanning Electron Microscope(SEM). We were possible to discover a lot of TRWPs at the fine dust of the 100 ± 20 ㎛. And we analysis it u sing the Thermo Gravimetric Analysis(TGA) and Gas Chromatography/Mass Spectrometer(GC/MS) for the quantitative components from the tire. As a result, it was confirmed that TRWPs generated from the roadside fine dust were included the 0.21 %, and the tire and road components in the generated TRWPs consisted of the 3:7 ratio.

• Resources Recycling
• /
• v.28 no.6
• /
• pp.3-8
• /
• 2019

Recently, plastic waste in Korea has been recognized as a critical issue due to an increase in massive production of plastics, difficulty in disposal of waste plastics, and public recognition of toxicity in micro-plastics, etc. To resolve those problems, the regulation to reduce plastics consumption may be primarily considered but, in this case, clarification should be made on the rationales and the action plans in the regulation for individual waste plastic items. Another problem is the small capital sizes of domestic recycling companies, which leads to poor R&D capacity, low recycling yields and thus lowering values of recycling items. This adversely affects consumers' perception. The R&D toward recycling technical progress should take into account the environmental friendliness and recyclability from the early product design stages. Certainly, this should be supported in governmental policy and public action plans. In addition, by referring to advanced policies of i.e. European Union, the recycling industry should be recognized as an opportunity toward new investment & employment. If necessary, the regulation of plastic consumption through a formal evaluation process such as Life Cycle Assessment (LCA) will also be helpful. The values of recycled plastics should be improved through the identification and elimination of harmful chemical substances potentially contained in the products.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.23 no.5
• /
• pp.218-223
• /
• 2013

In this study, the reflectivity characteristics of Ag nano-coating grown by electroless plating were investigated in order to use as the reflecting plate of BLU (Back Light Unit) in the LCD (Liquid Crystal Display) or LED (Light Emitting Diode) display equipment. The microstructure of Ag nano-coating was polycrystalline nano-structure that consisted of Ag nano-crystals to be reduced and precipitated, and the size of reduced nano-crystals increased as the thickness of nano-coating increased. The reflectivity of Ag nano-coating in the visible light decreased as the thickness of nano-coating increased and the reduction of reflectivity was more severe in the short wavelength region of visible light. The decrease of reflectivity was closely related to the size of Ag nano-crystal and was thought to be due to the larger surface roughness of larger nano-coating thickness. Therefore, the finer Ag nano-crystals and thinner nano-coating thickness could be favorable for the higher reflectivity of Ag nano-coating grown by electroless plating.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2017.05a
• /
• pp.121-121
• /
• 2017

본 연구는 비전도성 폴리머 표면을 개질하여 감광성 금속을 유전체 표면에 흡착시키고, 감광성 금속의 광화학 반응을 이용하여 귀금속 촉매를 비전도성 폴리머 표면에 선택적으로 흡착시켜 무전해 Cu 도금을 수행하여 금속패턴을 형성하였다. 기능성 유연 필름은 일반적으로 투명한 플라스틱 고분자 기판을 기반으로 전기 전자, 에너지, 자동차, 포장, 의료 등 다양한 분야에서 폭넓게 활용 되고 있으며, 본 연구에서는 습식 도금 공정을 이용하여 폴리이미드 필름상에 $10{\mu}m$ 이하의 미세패턴을 형성하기 위한 공정을 개발하고자 하였다. 비전도성 폴리머 표면에 무전해 도금을 위해서 우선 폴리머 필름의 표면을 개질하는 공정이 필요하다. 이에 KOH 또는 NaOH 알카리 용액을 이용하여 표면을 개질하였으며 개질된 표면에 감광성 금속이온의 흡착시키기 위한 감광성 금속이온은 주석을 사용하였으며, 주석 용액의 안정성 및 퍼짐성 향상을 위해 감광성 금속 용액의 제조 및 특성을 관찰하였으며, 감광성 금속화합물이 흡착된 비전도성 유전체 표면을 포토마스크를 이용하여 특정 부위, 즉 표면에 금속패턴 층을 형성하고자 하는 곳은 포토마스크를 이용하여 광원을 차단하고 그 외 부분은 주 파장이 365nm와 405nm 광원을 조사하여 선택적으로 감광성 금속화합물의 산화반응을 유도하는 광조사 공정을 수행하였다. 광원이 조사되지 않은 부분에 귀금속 등의 촉매 입자를 치환 흡착시켜 금속 패턴이 형성될 수 있는 표면을 형성하였다. 위의 활성화 공정이후에 활성화 처리된 표면을 세척하는 수세 공정을 거친 후 무전해 도금공정에 바로 적용할 경우 미세한 귀금속 입자가 패턴이 아닌 부분 즉 자외선(UV) 조사된 부분에도 남아있어 도금시 번짐 현상이 발생한다. 이에 본 연구에서는 활성화 처리 후 약 알칼리 용액에 카르복실산을 혼합하여 잔존하는 귀금속 입자를 제거한 후 무전해 Cu 도금액을 이용하여 $10{\mu}m$ 이하의 Cu 금속 패턴을 형성하였다.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.48 no.6
• /
• pp.7-14
• /
• 2011

This paper is related to a roll-type micro-contact printing process. The proper parameters such as coating velocity, inking velocity, printing velocity and printing pressure as well as Ag contents of Ag ink were extracted to perform the fine patterning of Ag electrodes. Additionally we developed a process for PDMS with high uniform thickness. Finally, we obtained the Ag fine electrodes on $4.5cm\;{\times}\;4.5cm$ plastic substrate with the line width of 10 um, thickness less than 300 nm, surface roughness less than 40 nm, and the specific resistance of $2.08\;{\times}\;10^{-5}{\Omega}{\cdot}cm$.