• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.2C
• /
• pp.170-183
• /
• 2002

This paper proposes an efficient frequency and symbol synchronization structure which could solve problems of the conventional methods to implement DVB-T receive modem which adopted OFDM transmission method. The main considerations of frequency synchronization algorithms are that the frequency tracking performance is not stable enough, and lots of symbols are required, especially when the decimal part of normalized frequency offset (which original frequency offset is divided by the subcarrier spacing) is around $\pm$0.5 to solve these problems, we propose an efficient frequency offset is divided by the subcarrier spacing) is around $\pm$0.5 by using the average of coarse synchronization over several symbol. Also, we suggest a new symbol synchronization structure which is easy to implement without performance degradation in multipath fading channel with only coarse symbol synchronization by making window offset to the range of guard interval in contrast to the conventional structure of dividing symbol synchronization in fine and coarse mode during synchronization. By extensive simulation, we have shown the superiority of the proposed schemes.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.4A
• /
• pp.250-258
• /
• 2005

An initial carrier frequency offset estimation algorithm is proposed for a multi-user frequency bowing orthogonal frequency division modulation-frequency division multiple access (FH-OFDMA) system with a single preamble symbol. To mitigate the effect of the frequency offset, every mobile station needs to accurately and rapidly acquire synchronization. The proposed algorithm uses only one preamble symbol in which two kinds of subcarriers are designed for coarse and fine frequency offset estimation. The non-data aided estimation using the energy spectrum is exploited for fine offset estimation, and maximum likelihood estimation using correlation for coarse offset estimation. By combining the two estimation results, an accurate frequency offset can be estimated with a single symbol. Through simulations, the performance of the proposed algorithm is evaluated by comparing estimation error variance with a conventional method.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.18 no.3
• /
• pp.215-221
• /
• 2018

In this paper, a comprehensive design of HBC(Human Body Communication) system for capsule endoscope is presented. First, we propose a method of combining the signals received from multiple patches attached to the body of patient through differential operation and derive the signal SNR mathematically. To synchronize HBC transmission signal sent from capsule, we analyzed coarse timing synchronization method using PN code and fine timing synchronization performance among Manchester, NRZ and RZ modulation method using ZCD(Zero Crossing Detector). In addition, we evaluated the equalization performance of HBC signal frame in Rician and Rayleigh channel environments by applying LMS and RLS algorithm.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.20 no.1
• /
• pp.3-9
• /
• 2010

Micro particles in fluid can be manipulated by using ultrasonic standing wave since the ultrasound makes particles move by means of its acoustic radiation force. This work concerns the micro particle manipulation system using ultrasonic standing wave which consists of a microchannel, a reflector, and an ultrasonic transduer. In the present system, the effects of the structural elements should be carefully considered to comprehend the system and find the optimal operational condition. In this investigation, finite element analysis was employed to analyze the system. Some interesting characteristics on the reflector thickness, the channel width, and the operational frequency were observed. Several experimental results were compared with the analytic results. Consequently, this work solidifies the importance of those system parameters and reveals the possibility of various applications of the particle manipulation using ultrasonic standing wave.

• Korean Journal of Remote Sensing
• /
• v.32 no.3
• /
• pp.245-251
• /
• 2016

We present linear particle depolarization ratio at 440, 675, 870, and 1020 nm retrieved from measurements with an AERONET sun/sky radiometer at the source region of Asian dust, Dunhuang. The linear particle depolarization ratios are retrieved at the two receptor sites (Gosan and Osaka). The highest linear particle depolarization ratio of 0.34 at 1020 nm is retrieved from nearly pure Asian dust. The linear particle depolarization ratio decreased as the volume concentration of fine-mode particle increased. We can confirm that the ratio of Asian dust is changed by the value of the linear particle depolarization ratio retrieved by AERONET data.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.7 no.4
• /
• pp.719-724
• /
• 2003

In this paper, we have presented the simulation results about threshold voltage of nano scale lightly doped drain (LDD) MOSFET with halo doping profile. Device size is scaled down from 100nm to 40nm using generalized scaling. We have investigated the threshold voltage for constant field scaling and constant voltage scaling using the Van Dort Quantum Correction Model (QM) and direct tunneling current for each gate oxide thickness. We know that threshold voltage is decreasing in the constant field scaling and increasing in the constant voltage scaling when gate length is reducing, and direct tunneling current is increasing when gate oxide thickness is reducing. To minimize the roll off characteristics for threshold voltage of MOSFET with decreasing channel length, we know $\alpha$ value must be nearly 1 in the generalized scaling.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.1229_1230
• /
• 2009

$SiO_2$ 패시베이션 층에 As+ 이온을 주입한 1.2 kV급 AlGaN/GaN 쇼트키 장벽 다이오드( Schottky Barrier Diode, SBD )를 제작하였다. 주입된 As+ 이온들은 역방향 바이어스에서 공핍 영역의 곡률을 변화 시켰고, 이로 인해 항복 전압이 증가하고 누설 전류가 감소하였다. 제안된 소자의 항복전압이 1204 V 이었고, 기존 소자의 항복전압은 604 V 이었다. 캐소드 전압이 100 V일 때 제안된 소자의 누설전류는 21.2 nA/mm 이었고, 같은 조건에서 제안된 소자는 $80.3{\mu}A/mm$ 이었다. 주입된 As+ 양이온은 이차원 전자 가스( Two-Dimensional Electron Gas, 2DEG )에 전자를 유도했고, 채널의 농도가 미세하게 증가하였다. 따라서 순방향 전류가 증가하였다.

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.05a
• /
• pp.90.1-90.1
• /
• 2011

연료전지 분리판은 연료, 공기, 수분이 흐를 수 있는 채널들이 포함되어 있으며, 전지들에 의해서 생산되는 전류를 흐르게 할 수 있는 전기전도성을 가져야 할 필요가 있다. 일반적인 금속판들은 연료전지 스택 내의 산성 분위기에 존재해야 하기 때문에 표면 부식이 쉽게 발생한다. 그라핀(graphene)은 우수한 전기전도성을 가지고 있을뿐만 아니라 물리화학적 내식성 및 내구성을 가지고 있어 연료전지 분리판으로서 응용이 가능할 것으로 판단된다. 본 연구에서는 일반적으로 널리 사용하고 있는 스테인리스강(stainless steel)을 모재로 사용하였으며, 그라핀을 전기분무법(electro spray coating)으로 코팅하여 스테인리스강의 내식성 및 전기전도성을 동시에 향상시키고자 하였다. 그라핀은 에탄올을 용매로 사용하여 분산하였으며, 분산제로 소량의 다이페닐다이에톡시실란(diphenyldiethoxysilane)을 첨가하여 코팅용액을 제작하였다. 코팅공정은 15kV 전압을 가하여 1시간동안 코팅을 진해하였으며, 그라핀-스테인리스강 모재의 미세구조를 전자현미경과 광학현미경을 통하여 관찰하였다. 또한 X-선 회절분석법을 이용하여 그라핀의 결정구조를 분석하였다. 한편 스택의 내부와 유사한 산화성 분위를 모사하기 위해 $80^{\circ}C$의 0.1N $H_2SO_4+2ppm\;F^-$ 용액에서 내식성 실험을 수행하였고, 면간접촉저항도 측정하였다. 그라핀이 코팅된 스테인리스강 시편은 고분자전해질 연료전지 분리판의 요구조건을 만족하였으며, 연료전지 분리판으로서의 적용가능성을 확인하였다.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2009.04a
• /
• pp.565-570
• /
• 2009

Micro particles in fluid can be manipulated by using ultrasonic standing wave since the ultrasound makes particles move by means of its acoustic radiation force. This work concerns the micro particle manipulation system using ultrasonic standing wave which consists of a microchannel, an adaptive layer, a reflector, and an ultrasonic transduer. In the present system, the effects of the structural elements should be carefully considered to comprehend the system and find the optimal operational condition. In this investigation, finite element analysis was employed to analyze the system. Some interesting characteristics on the reflector thickness, the channel width, and the operational frequency were observed. Several experimental results were compared with the analytic results. Consequently, this work solidifies the importance of those system parameters and reveals the possibility of various applications of the particle manipulation using ultrasonic standing wave.

• The KSFM Journal of Fluid Machinery
• /
• v.14 no.2
• /
• pp.17-24
• /
• 2011

Temperature gradient focusing (TGF) of analytes via Joule heating is achieved when electric field is applied along a microchannel of varying width. The effect of varying width of the microchannel for the focusing performance of the device was numerically studied. The governing equations were implemented into a quasi-1D numerical model along a microchannel. The validity of the numerical model was verified by a comparison between numerical and experimental results. The distributions of temperature, velocity, and concentration along a microchannel were predicted by the numerical results. The narrower middle width and wider outside width of the channel having the fixed length contribute to improve the focusing performance of the device. However, too narrow middle width of the channel generates a higher temperature which can cause the problems including sample denaturation and buffer solution boiling. Therefore, the channel geometry should be optimized to prevent these problems. The optimal widths of the microchannel for the improvement on TGF were proposed and this model can be easily applied to lab-on-a-chip (LOC) applications where focusing is required based on its simple design.