• Korean Journal of Veterinary Research
• /
• v.29 no.4
• /
• pp.475-478
• /
• 1989

돼지로 부터 분리한 Staphylococcus hyicus subsp hyicus 489주의 혈청형을 자가생산한 인자혈청을 이용한 평판응집반응으로 동정하였다. 분리균의 혈청형은 A(16.8%), C(20.4%), D(9.4%), E(7.2%), F 형(29.2%) 및 미분류형(17.0%)으로 동정되었으며, 돼지의 건강상태, 신체부위 및 연령에 관계없이 F형의 분포가 가장 높았다.

• Proceedings of the Korean Society of Postharvest Science and Technology of Agricultural Products Conference
• /
• 2003.10a
• /
• pp.214.2-215
• /
• 2003

압출조리 공법에 의한 한국형 쌀 이유식 제조에서 아밀라제 첨가가 압출미분의 물성 변화에 미치는 영향을 알아보았다. 압출조리기의 스크류 회전수는 200rpm, 원료의 사입속도는 180g/min로 고정하여 작동하였다. 원료 쌀가루의 수분함량은 18, 23, 28%로 가수하였고 첨가된 아밀라제는 Bacillus licheniformis로부터 분리한 Termamyl 120LS(NOVO사), Bacillus amylolichuefaciens로부터 분리한 BAN 240L(NOVO사) 및 맥아분말이다. 아밀라제 첨가에 의해 압출미분의 수용성지수는 3배까지 증가했고, 환원당 생성량은 원료의 수분함량에 크게 영향을 받아 28% 수분함량에서 급격히 증가하여 수용성지수와는 다른 경향을 나타내었다. 겔 투과크로마토그래피에 의한 분자량적 구조 변화 측정 결과 아밀라제 첨가에 의해 고분자 획분이 상당히 감소했으며 상대적으로 저분자 획분이 증감함을 알 수 있었다. 아밀라제의 잔존환성은 아밀라제 종류에 따라 다르며 가장 내열성인 Termamyl 120LS의 경우 용융부위 온도 14$0^{\circ}C$에서 27%까지 감소하였다. 침전법에 의한 분산특성은 아밀라제 작용에 의해 수용성 물질이 증가함에 따라 침전층의 감소를 나타내었으나 처리온도가 14$0^{\circ}C$로 증가하면 침전층의 높이는 증가하였다. 겉보기 점도는 아밀라제 첨가에 의해 무처리 압출미분의 1/4~1/200로 감소하였다. 시판 이유식의 권장농도에서의 점도와 같은 점도 수준에 도달하기 위해서는 원료의 수분함량(18, 23, 28%), 아밀라제 종류 및 첨가량, 계량부위 온도에 따른 각 작동조건의 압출미분을 최고 1.8배의 양을 사용할 수 있었다. 이상에서 살펴본 바와 같이 원료 쌀가루에 첨가된 아밀라제가 압출조리기내를 통과하면서 쌀가루의 가수분해를 일으켜 환원당 등 수용성 물질이 증가하고 분산특성이 좋아지며 점도가 낮아지고 결국 이유식의 열량밀도를 증가시킬 수 있음을 확인할 수 있었다.

• Proceedings of the KSME Conference
• /
• 2001.11b
• /
• pp.764-769
• /
• 2001

Recently, according to increase in the requirement of electric power, a thermoelectric power plant equipped with pulverized coal combustion system is highly valued, because coal has abundant deposits and a low price compared with others. For efficient use of coal fuel, most of plant makers are studying to improve combustion performance and flame stability, and reduce pollutant emission. One of these studies is how to control the profile of particle injection and velocity dependant on coal nozzle. Basically, a mixed flow of gas and particle in coal nozzle is required to have appropriate injection and concentration distribution at exit to achieve flame stability and low pollutant, but it is very difficult to obtain that without help of a coal separating device within nozzle. In this study, each distribution of air and coal flow rate is measured for the coal nozzle with coal separator developed by us. The coal concentration at exit is various according to inlet swirl values and positions of coal separator. Also pressure drop is measured for various operating conditions of this nozzle. From these results, we can find the separation characteristic of new developed coal separator, and select proper operation range of coal nozzle. When this coal nozzle is applied to actual plant, these investigations will be very useful to confirm the shape of coal separator to have efficient particle injection.

• Journal of Energy Engineering
• /
• v.23 no.3
• /
• pp.17-20
• /
• 2014

A magnetic fluid separation technology was confirmed to be very effective to remove the suspended solids from contaminated water. We have surveyed on the effects of operating variables on the characteristics of suspended solids(SS) removal investigated through the test runs using magnetic powder. Magnetic flocculation here formed by adsorbing fine magnetites on the surface of suspended solid was observed. The strength of magnet was of significance in determining the SS removal efficiency.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.04a
• /
• pp.469-472
• /
• 2008

As recycled fine aggregate manufacturing technology with exceeding in economical efficiency, reduction efficiency of environmental load and quality improvement effect of recycled fine aggregate, it is to develop dry manufacturing system composed specific gravity separator of high-speed rotation impact type and centrifugal Force Powder Collector, etc. in this study. And it is to verify performance with evaluating quality of recycled fine aggregate. In consequence, it is identify that performance improvement effect of recycled fine aggregate by crushing recycled fine aggregate according to high-speed rotation impact, separating and collecting powder and minuteness dust according to centrifugal Force and mass defect, separating and reclaiming minuteness sand to mass defect.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.04a
• /
• pp.481-484
• /
• 2008

Recently, the recycling and reusing of construction and demolition waste concrete is urgently required because waste concrete is greatly increased according to the rapid increasing of urban redevelopment project, but the problem solution for demand and supply unbalance of fine aggregate is urgently required because of the restriction of collecting sea fine aggregate. So the utilization of high quality recycled fine aggregate using construction and demolition waste concrete as new fine aggregate for construction industry is urgently. Accordingly, In this study, As recycled fine aggregate manufacturing technology with exceeding in economical efficiency, reduction efficiency of environmental load and quality improvement effect of recycled fine aggregate, it is to develop dry manufacturing system composed specific gravity separator of high-speed rotation impact type and centrifugal Force Powder Collector, etc. And it is to examine mechanism of recycled sand dry manufacturing system.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2003.05b
• /
• pp.875-878
• /
• 2003

본 연구에서는 할선법과 모멘트의 고정점 알고리즘 독립성분분석을 이용하여 흔합영상을 분리하는 기법을 제안하였다. 여기서 할선법은 독립성분 상호간의 정보를 최소화하기 위한 목적함수의 최적화 과정에서 요구되는 1차 미분에 따른 계산을 간략화하기 위함이고, 모멘트는 최적화 과정에서 발생하는 발진을 억제하여 보다 빠른 학습을 위함이다. 제안된 기법을 $512{\times}512$의 픽셀을 가지는 8개의 영상을 대상으로 임의의 흔합행렬에 따라 발생되는 흔합영상의 분리에 적용한 결과, 할선법에 기초한 고정점 알고리즘보다 우수한 분리률과 빠른 분리속도가 있음을 확인하였다.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.32 no.5
• /
• pp.649-653
• /
• 1999

A magnetic fluid separation technology was confirmed to be very effective to remove the suspended solids (SS) from aquacultural recirculating water, In this study, the effects of operating variables on the characteristics of SS removal were investigated through the test runs using magnetite of 2 $\mu$m mean diameter as magnetic powder. Magnetic flocculation here formed by adsorbing fine magnetites on the surface of suspended solid was observed. The strength of magnet was of significance in determining the SS removal efficiency as well as the capacity of the equipment. In addition, the SS removal efficiency decreased with an increase in the superficial liquid velocity, but the effect became negligible when the mass ratio of magnetite to the suspended solids was higher than 1.0.

• Proceedings of the Korea Contents Association Conference
• /
• 2010.05a
• /
• pp.633-634
• /
• 2010

축대칭 함몰지형 위를 진행하는 확장형 완경사 방정식의 해석해를 유도하였다. 변수분리법을 이용하여 지배방정식을 상미분방정식으로 만들었으며, 파속과 군속도로 표현되는 계수들은 Hunt(1979)의 근사식을 이용하여 양함수의 형태로 표현하였다. 마지막으로 Frobenius기법을 이용하여 확장형 완경사방정식의 해를 유도하였다.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.25 no.2
• /
• pp.182-191
• /
• 2001

The paper describes the improvement on concurrent subspace optimization(CSSO) via automatic differentiation. CSSO is an efficient strategy to coupled multidisciplinary design optimization(MDO), wherein the original design problem is non-hierarchically decomposed into a set of smaller, more tractable subspaces. Key elements in CSSO are consisted of global sensitivity equation, subspace optimization, optimum sensitivity analysis, and coordination optimization problem that require frequent use of 1st order derivatives to obtain design sensitivity information. The current version of CSSO adopts automatic differentiation scheme to provide a robust sensitivity solution. Automatic differentiation has numerical effectiveness over finite difference schemes tat require the perturbed finite step size in design variable. ADIFOR(Automatic Differentiation In FORtran) is employed to evaluate sensitivities in the present work. The use of exact function derivatives facilitates to enhance the numerical accuracy during the iterative design process. The paper discusses how much the automatic differentiation based approach contributes design performance, compared with traditional all-in-one(non-decomposed) and finite difference based approaches.