• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.04a
• /
• pp.371-376
• /
• 1997

A 100*100.mu.m$^{2}$ aluminum micro mirror is designed and fabricated using a thick photoresist as a sacrificial layer andas a mold for nickel electroplating. The micro mirror is composed of aluminum mirror plate, two nickel support posts, two aluminum hinges, two address eletrodes, and two landing electrodes. The aluminum mirror plate,which is supported by two nickel support posts, is overhung about 10.mu.m from the silicon substrate. THe aluminum mirror plate is actuated like a seesaw by electrostatic force generated by electic potential difference applied between the mirror plate and the address electrode. This paper presents some methods to measure the optical and the dynamic characteristics of the fabricated micro mirror.

• Proceedings of the Optical Society of Korea Conference
• /
• 2005.02a
• /
• pp.314-315
• /
• 2005

• Proceedings of the KIEE Conference
• /
• 1999.11d
• /
• pp.1151-1153
• /
• 1999

3-layer polysilicon 표면미세가공공정을 이용하여 micro zone plate 렌즈와 미러 및 이를 구동하기 위한 구동기를 일체화시킨 마이크로 구동형 광학소자를 설계, 제작하였다. 650nm의 파장대역에서 초점거리가 $500{\mu}m$가 되도록 마이크로 zone plate 렌즈를 설계하였으며, 렌즈의 광학축은 실리콘 기판 상에서 $121{\mu}m$거리에 위치하도록 제작하였다. 마이크로 hinge와 스프링 latch 및 측면지지 plate를 이용하여 마이크로 렌즈와 미러가 실리콘 기판상에서 out-of-plane동작이 가능하도록 하였다. 마이크로렌즈 초점거리의 가변을 위하여 6개의 SDA(Scratch Drive Actuator)어레이를 설계, 제작하였다. 또한 빔 반사를 위한 마이크로 미러를 설계하고 $45^{\circ}$ self-assembly를 위하여 마이크로 hinge와 SDA array를 제작하였다.

• Transactions of Materials Processing
• /
• v.14 no.5 s.77
• /
• pp.477-481
• /
• 2005

Wafer scale micro mirror array with high surface quality for small form factor (SFF) optical pick-up was fabricated by micro UV-molding. To replicate micro mirror array for SFF optical pick-up, a high- precision mold was fabricated using micro-machining technology. Wafer scale micro mirror array was UV-molded using the mold and then the process was optimized experimentally. The surface flatness and roughness of UV-molded micro mirror array were measured by white light scanning interferomety system and analyzed the transcribing characteristics. Finally, the measured flatness of UV-molded micro mirror away for SFF optical pick-up, which was fabricated in the optimum processing condition, was less than 70nm.

• Proceedings of the KIEE Conference
• /
• 2003.10a
• /
• pp.49-52
• /
• 2003

Single crystalline silicon (SCS) was adopted for a reliable micromirror array of biochip fabrication applications. SCS has excellent mechanical properties and smooth surface, which is the best material for micromirror devices. The mirror array has $16{\times}16$ micromirrors and each mirror has a $120{\mu}m{\times}100{\mu}m$ reflective surface. The micromirror has simple torsional beam springs and electrostatic force was used for driving. The designed tilting angle was $9.6^{\circ}$, and the tilting angles were measured according to applied voltages. The surface roughness was measured by a laser profiler. The response time was measured using He-Ne laser and position sensitive diode (PSD), and the lifetime was checked for reliability proof.

• 한국정보통신설비학회:학술대회논문집
• /
• 2003.08a
• /
• pp.93-95
• /
• 2003

We have designed and fabricated a micromirror array using single crystalline silicon (SCS) for data communication applications. The mirror array has $16{\times}16$ micromirrors and each mirror has $120{\mu}m{\times}100{\mu}m$ reflective surface. Electrostatic force was adopted as a driving mechanism. The spring dimensions were determined using relationship between spring dimensions and driving voltage. The designed tilting angle was $9.6^{\circ}$, and measured tilting angle according to applied voltages were experimented. The response time was measured using He-Ne laser and position sensitive diode (PSD), and lifetime was checked for reliability proof.

• Proceedings of the KIEE Conference
• /
• 1997.11a
• /
• pp.618-620
• /
• 1997

A $50{\times}50{\mu}m^2$ aluminum micromirror array is fabricated using shadow evaporation process. The fabrication process is very simple with use of shadow evaporation process, and the micromirror array has a high fill-factor. The static and dynamic characteristics such as deflection angle vs. applied voltage, step response, and frequency response are measured using a contact free optical measurement technique. The downward threshold voltage was 8 V, step response time was $13.5{\mu}s$ when 32 V step voltage applied, and a resonance observed at 11kHz. The lifetime of micromirror with anti-stiction coating was tested and micromirror operated successfully over 200 million cycles of touch-down operations.

• Proceedings of the KIEE Conference
• /
• 2000.07c
• /
• pp.2260-2262
• /
• 2000

In this paper, micromirror which can rotate 45 degree is designed, analyzed and fabricated. The micromirror is parallel to the substrate initially. When external magnetic field is applied, a micromirror can rotate to align its easy axis to the field. The size of micromirror array is $10{\times}10$. The mirror plate and spring is made of aluminium, and nickel is used as soft magnetic material. To obtain 45 degree angular deflection, dimension ratio between stopper length and thickness of sacrificial layer is properly selected. By using electrostatic force, individual actuation is possible.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2005.05a
• /
• pp.47-50
• /
• 2005

In this study, micro mirror array for small form factor optical pick-up was replicated by micro UV-molding. First, mold for micro mirror array was fabricated using micromachining. Also, to analyze the characteristics of the surface quality, flatness of replicated mirror surface were measured by white light scanning inteferometry system. The results show that the micro mirror array with a sufficient surface quality can be obtained by polymer replication process.

• Proceedings of the KIEE Conference
• /
• 1997.11a
• /
• pp.612-614
• /
• 1997

Silicon based micro mirror array is a highly efficient component for use in optical applications such as adaptive optical systems and optical correlators. A micro mirror array designed, fabricated and tested here is consisted of $5{\times}5$ single layer polysilicon, electrostatically driven actuators. In this paper, deflection characteristics and pull-in behavior of the actuators for analog control was studied and particularly, the influence of the residual stress in flexure beams for the restorative force of actuators was considered. The springs are modeled as a residual stress-free spring and a spring with residual stress. In calculation, a mirror with the residual stress-free springs has 30.3N/m spring constant and 31.1V pull-in voltage. On the other hand, a mirror with the stressed springs has 23.6N/m and 27.4V respectively. The experimental result, which is 20.5N/m and 25.5V, shows that the stressed springs ore well modeled.