• Title/Summary/Keyword: 미래자동차

Search Result 391, Processing Time 0.03 seconds

A Study for Failure Examples Including with Timing Belt, Camshaft Position Sensor and Ignition Coil Damage of LPG Vehicle Engine (액화석유가스 자동차 엔진의 타이밍벨트, 캠샤프트포지션센서, 점화코일 손상과 관련된 고장사례에 대한 연구)

  • Lee, IL Kwon;Kook, Chang Ho;Ham, Sung Hoon;Kim, Jee Hyun;Lee, Jae Gang;Han, Seung Min;Hwang, Woo Chan;Hwang, Han Sub;Moon, Hak Hoon;Lee, Jeong Ho
    • Journal of the Korean Institute of Gas
    • /
    • v.26 no.3
    • /
    • pp.54-59
    • /
    • 2022
  • This paper is a purpose to study and analyze the failure examples for timing belt, camshaft position sensor and ignition coil of LPG automotive engine. The first example, whe the service man install the front case bracket of engine, he excessively tightened up a 12mm bolt for being fixed of brackct. As a results, the bolt was separated from joint part so that it was put in between the crankshaft sprocket. Therefore the belt was broken off because of interference between timing belt and sprocket tooth. The second example, it verified the disharmony phenenomen of engine that the gap of the camshaft position sensor and camshaft senseing point assembled on cylinder head part was small more than iregular value so that the it was generated senseing damage phenomenon by pulse signal misconduct. The third example, it was found the engine disharmony phenomenon that the fire in the ignition coil was leaked by inner damage of Number 2 ignition coil.Therefore, the the manager of a car throughtly have to inspect not in order to arise the failure symptoms.

Experimental Verification of Spur Gear Pump based on FEM Analysis (FEM해석 기반 스퍼기어 펌프의 실험적 검증에 대한 연구)

  • Lee, Chan-Woo;Kim, Sang-Yu;Lee, Seo-Han;Kim, Jae-Yeol;Lim, Jin-Hyuk
    • Journal of the Korean Society of Manufacturing Process Engineers
    • /
    • v.21 no.6
    • /
    • pp.1-7
    • /
    • 2022
  • This work investigated the performance improvement of a medium-pressure fixed-displacement-type SPUR gear pump, which is mainly used in the machine tool industry. The 3D CFX analysis and IS technique were applied using ANSYS (commercial FEM code) and compared with experimental results to ensure the reliability of the analysis. In addition, the performance improvement of the pump was obtained using the theoretical volumetric displacement equation, and the gear tooth width was changed. The pressure flow performance curves were compared, and the results were analyzed according to the width of the gear teeth. This is a factor that can cause irregular flow, vibration, and noise inside the gear pump owing to friction between the housing and gear pump.

Study on the Optimal Design of Automatic Data Recovery System in case of Communication Loss in Remote Management of Hydraulic Facilities (수리시설물 원격관리에 있어 통신두절시 데이터 자동복구 시스템 최적설계에 관한 연구)

  • Ahn, Tae-Hyung;Kim, Sang-Yu;Ko, Jeong-Min;Kim, Jae-Yeol
    • Journal of the Korean Society of Manufacturing Process Engineers
    • /
    • v.21 no.4
    • /
    • pp.46-52
    • /
    • 2022
  • In the existing wired communication network, wired communication is frequently interrupted by lightning, which accompanies rain, and remote management cannot be performed when it is actually necessary. In the case of communication interruption, field data stored in the database are lost, and data at an important point in time may go missing; this causes a decrease in the reliability of the stored data. Therefore, in this study, wireless communication using the Internet of Things (IoT) communication network of the 4th industrial technology is installed in the prototype to reduce wired communication construction costs, prevent resource waste and environmental damage due to communication facility construction, and prepare for communication loss.

Current Progress of Monitoring of Hydrogen Refueling Station and Hydrogen Fuel Cell Vehicle in Korea (국내 수소스테이션과 수소연료전지차의 모니터링 현황)

  • Lee, Young-Chul;Lee, Jeung-Sung;Han, Jeong-Ok;Park, Dall-Young;Choi, Chung-Hwan;Kim, Jae-Dong;Cho, Young-Ah;Jeon, Sang-Hee;Hong, Sung-Ho
    • 한국신재생에너지학회:학술대회논문집
    • /
    • 2009.11a
    • /
    • pp.209-212
    • /
    • 2009
  • 수소에너지의 무궁한 가능성 때문에 관련 기술은 미래 국가 경쟁력을 좌우할 것이며, 이러한 수소에너지의 핵심으로 수소제조공정 및 수소스테이션 관련 기술은 국가연료전지 시장을 비롯한 수소연료전지자동차 산업 전반에 커다란 영향을 미칠 것으로 예상되고 있다. 그러므로 세계 각국은 수소에너지를 미래에너지원으로 개발하기 위하여 대규모로 기술개발 및 실증연구를 실시하고 있으며, 주로 수소연료전지자동차 개발과 아울러 수소스테이션 개발에 대한 인프라 구축에 대해 이루어지고 있다. 국내에서도 국가주도로 수소스테이션 건설이 이루어지고 있으며, 본 연구에서는 수소연료전지자동차를 이용하여 수소인프라와의 모니터링에 대한 현황에 대해 논의하고자 한다.

  • PDF

Smart IoT parking lot for minimize EV fire damage (전기차 화재 피해 최소화를 위한 스마트 IoT 주차장)

  • So-Hyeon Park;Seo-young An;Kyung-June Lee
    • Proceedings of the Korea Information Processing Society Conference
    • /
    • 2023.11a
    • /
    • pp.770-771
    • /
    • 2023
  • '환경친화적 자동차의 개발 및 보급 촉진에 관한 법률'에 따라 주거지역 내의 전기차 충전기 설치 및 보급이 빠르게 확산 중이다. 전기 자동차는 충전 중 화재 시 리튬이온 배터리 열폭주(thermal runaway) 현상 때문에 쉽게 진압하지 못한다는 단점이 존재한다. 이에 따라 지하 주차장에서의 전기 자동차 충전 중 화재 시 피해 최소화를 위한 스마트 IoT 주차장을 기획하고 개발하였다.

Model Development for Analysis of the System Dynamic Characteristics for Fuel Cell-battery Based Unmanned Aerial Vehicles (연료전지-배터리 기반 무인항공기 추진시스템 동특성 분석을 위한 모델 개발)

  • DAEIL HYUN;SEOKMOO HONG;JAEYOUNG HAN
    • Transactions of the Korean hydrogen and new energy society
    • /
    • v.34 no.5
    • /
    • pp.490-496
    • /
    • 2023
  • Unmanned aerial vehicles (UAVs) research is recently actively underway. Especially, fuel cell battery hybrid systems are widely used to overcome the limitations of continuous operation. However, fuel cell systems must be operated in combination with a battery due to their low specific output characteristics. Therefore, a hybrid power system model for UAVs is developed. The rule-based strategy is applied to the model to properly distribute power to batteries and fuel cells. As a result, the designed rule-based power distribution control operates UAVs while maintaining battery state of charge(SOC) at an appropriate level.

A Study on the Production of Supporting Ring Using Casting for Public Environmental Vehicles (대중적 환경차를 위한 주조를 이용한 서포트링 제작에 관한 연구)

  • Jeongick Lee
    • Journal of Advanced Technology Convergence
    • /
    • v.2 no.3
    • /
    • pp.17-24
    • /
    • 2023
  • I am designing a research paper with the aim of studying hybrid vehicles. Hybrid vehicles, as the next-generation automobiles, feature a combination of internal combustion engines and battery engines, resulting in a revolutionary reduction in fuel consumption and harmful gas emissions compared to conventional vehicles. The electric motor in hybrid cars derives power from a high-voltage battery installed within the vehicle, which is recharged during vehicle motion. In contrast to traditional cars, which often experience energy losses due to idling caused by traffic congestion, hybrid systems optimize efficiency by skillfully managing the interplay between the internal combustion engine and the electric motor. This approach effectively addresses the inherent drawbacks of gasoline or diesel engines.Hybrid cars offer an array of benefits, including improved fuel efficiency, environmental friendliness, cost-effectiveness, and reduced noise emission. Consequently, they are progressively becoming a favored alternative among a growing number of individuals. This research endeavor has the potential to contribute towards curbing environmental pollution and dedicating efforts to future automotive research.

Technology Trends of Self-Driving Vehicles (자율주행 자동차 기술 동향)

  • An, K.H.;Lee, S.W.;Han, W.Y.;Son, J.C.
    • Electronics and Telecommunications Trends
    • /
    • v.28 no.4
    • /
    • pp.35-44
    • /
    • 2013
  • 과거 드라마로 인기를 끌었던 전격 Z 작전에서 키트는 우리에게 자율주행 자동차라는 환상을 심어주었다. 이러한 자율주행 자동차가 이제는 꿈이 아닌 현실로 다가오고 있다. 자율주행 자동차에 대한 정의를 내려보면 운전자의 개입 없이 주변환경을 인식하고, 주행 상황을 판단하여, 차량을 제어함으로써 스스로 주어진 목적지까지 주행하는 자동차를 말한다. 이러한 자율주행 자동차는 교통사고를 줄이고 교통 효율성을 높이며 연료를 절감하고 운전을 대신해줌으로써, 편의를 증대시킬 수 있는 미래 개인 교통수단이 될 것으로 기대된다. 본고에서는 자율주행 자동차의 기술 구성 요소와 관련된 기술 개발 동향에 대해서 기술하고, 자율주행 자동차가 실제 적용되기 위해 필요한 법적인 문제와 향후 전망에 대해서 살펴본다.

  • PDF

텔레매틱스와 미래형 자동차/도로체계

  • 문영준
    • Journal of the KSME
    • /
    • v.44 no.5
    • /
    • pp.52-55
    • /
    • 2004
  • 위성항법시스템(GPS)을 이용하여 목적지까지의 최적경로를 보여주는 경로안내시스템은 이미 상용화 단계에 도달하였으며, 최근에는 차량에 내재된 모뎀을 통해 통신기지국과 접속하여 사고 시 즉시 응급기관에 연락이 가능하도록 하는 장치의 설치 등이 정보통신 기술의 발달로 가능하게 됨으로써 자동차는 이제 단순한 탈 것에서 위치이동시 일어날 수 있는 제반 상황에도 대처할 수 있는 움직이는 비즈니스 공간으로 탈바꿈하고 있다.(중략)

  • PDF

Study for Failure Examples Involved to Spark Plug Assembling Part Damage, Timing Maladjustment and Alien Substance Insertion in Intake Valve Part on LPG Vehicle Engine (자동차용 LPG 엔진의 점화플러그 장착 부 손상, 점화시기 조정불량, 흡입밸브 부 이물질유입 고장사례 연구)

  • Lee, IL Kwon;Kook, Chang Ho;Ham, Sung Hoon;Kim, Sung Mo;Hwang, Han Sub;Jung, Dong Hwa;Moon, Hak Hoon;Lee, Jeong Ho
    • Journal of the Korean Institute of Gas
    • /
    • v.25 no.2
    • /
    • pp.22-27
    • /
    • 2021
  • This paper is a purpose to study the failure examples for LPG vehicle. The first example, the researcher certified the incongruity phenomenon decreased engine power by ignition fire leakage because of spark plug threaded part damage assembling in cylinder head. The second example, the timing mark that accurately adjusting the camshaft and crankshaft position were twisted about 0.5 block each other. Finally, the researcher seeked the disharmony phenomenon as it couldn't set ignition timing. The third example, the researcher knew the failure phenomenon by interrupted the closing period for intake valve moving with air flow in the number 3 port of cylinder head as the foreign substance in cylinder head didn't remove. Therefore, the manager of a car has to thorough going inspect and the manufacture of a car must remove the cause of failure with quality assurance.