• Proceedings of the Materials Research Society of Korea Conference
• /
• 2005.05a
• /
• pp.267-267
• /
• 2005

• Journal of the Mineralogical Society of Korea
• /
• v.31 no.4
• /
• pp.227-234
• /
• 2018

In this work, we have prepared the reactive media with the pyrophyllite based using ceramic extrusion process. The characteristics of pyrophyllite were analyzed using XRD, XRF, DSC-TGA and Zeta-potential analysis. The study of pyrophyllite based ceramic reactive media were conducted under various roasting temperature (500 to $1,300^{\circ}C$) conditions. With increasing the roasting temperature, strength was increased but BET surface area was decreased. Thermally treated pyrophyllite were analyzed by means of weight loss and structural changes as detected by using XRD, DSC-TGA and SEM analysis. Pyrophyllite primarily transforms to pyrophyllite dehydroxylate after roasting at $1,000^{\circ}C$. Pyrophyllite dehydroxylate transforms to mullite and cristobalite at $1,300^{\circ}C$. This study demonstrates that pyrophyllite could be used as a reactive media for ceramic support layers from Permeable Reactive Barriers.

• Journal of the Korean Ceramic Society
• /
• v.36 no.6
• /
• pp.671-678
• /
• 1999

Porous ceramics were fabricated from pressureless powder packing forming method using mullite and cordierite powders granulate by spray drying. The bending strength and shrinkage of porous ceramics were increased and their porosity were decreased with increasing temperature. It showed homogeneous distribution of 2$\mu\textrm{m}$ intergranular pores of mullite at 1400$^{\circ}C$, 2.5$\mu\textrm{m}$ intergranular pores of cordierite at 1300$^{\circ}C$ respedtively. Above that temperature intragranular particles were sintered and sintering by intergranular necking was extremely proceeded. In the test of thermal shock resistance sudden decrease of bending strength to $\Delta$T was not shown because intergranular large pore prevented sudden crack propagation.

• Journal of the Korean Ceramic Society
• /
• v.37 no.2
• /
• pp.174-180
• /
• 2000

Y-TZP/mullite composites were prepared by the infiltration of Y-TZP precursor into partially reaction-sintered mullite. The addition of Y-TZP(~7.2 wt%) increased the bend strength(207 MPa), fracture toughness(4.6MPa.m1/2) and Vickers microhardness(853kg/$\textrm{mm}^2$) of the uninfiltrated mullite sintered at 162$0^{\circ}C$ for 10h by more than 75, 70 and 105%, respectively. Residual alumina-rich glass was observed at a mullite/mullite junction, due to the mullitization reaction of silica melt with crystalline $\alpha$-Al2O3 during a final sintering. Although ZrO2 inclusions improved the final sintered density of mullite they did not effectively prevent its grain growth.

• Journal of the Korean Ceramic Society
• /
• v.43 no.6 s.289
• /
• pp.376-382
• /
• 2006

In the $Al(OH)_3-SiO_2-AlF_3$ system, leaf-shaped fluorotopaz was first formed at $800^{\circ}C$ and mullite whisker was formed at $1,100^{\circ}C$. The mass transportation of Al and Si as gas phase, the fast reaction and growth, and the absence of liquid phase existence in mullite whisker showed that the formation and growth of mullite was from the solid-vapor reaction.

• Korean Journal of Materials Research
• /
• v.6 no.12
• /
• pp.1179-1185
• /
• 1996

고온용 세라믹 쉘 몰드를 용융 알루미나와 콜로이달 실리카를 사용하여 제조한 후, 세라믹 쉘 몰드의 강도에 영향을 주는 요인을 분석하였다. 세라믹 쉘 몰드의 강도는 바인더의 실리카 입자의 크기가 작을수록 크며 또한 실리카 농도에 비례하여 증가함을 보이며 저온에서의 강도 발현은 콜로이달 실리카의 필름 형성에 의한 입자들의 결합임을 알 수 있었다. 세라믹 쉘 몰드의 소성 강도는 부착 스타코의 크기가 작을수록 크며 소성 온도에 비례하여 증가함을 보였다. 고온에서의 강도 발현은 알루미나 입자와 콜로이달 실리카 바인더의 결합뿐만 아니라 알루미나 입자사이의 결합도 영향을 줌을 알 수 있었다. 쉘 몰드의 결정상은 130$0^{\circ}C$이하에서 소성한 경우 $\alpha$-알루미나만 존재함을 보여 실리카는 비정질로 계속 남아 있음을 알 수 있고 140$0^{\circ}C$ 이상에서 소성한 경우 뮬라이트가 생성됨을 보였다.

• Journal of the Korean Ceramic Society
• /
• v.42 no.11 s.282
• /
• pp.753-757
• /
• 2005

In this study, we attempted to recycle the fly ash as a mullite whisker with addition of $Al_{2}O_{3}$ to obtain the high yield of mullite whisker. During the reaction process, mullite whisker was formed with the reaction of amorphous $\alpha$-Cristobalite and Anorthite above $1350^{\circ}C$. With increasing the heat treatment temperature and time, the mean length and aspect ratio of mullite whiskers was gradually increased.

• Journal of the Korean Ceramic Society
• /
• v.43 no.5 s.288
• /
• pp.320-326
• /
• 2006

Mullite whiskers were synthesized by a vapor-solid reaction with $Al(OH)_3-SiO_2-AlF_3$. The heat treatment temperature did not affect the shape of mullite whisker but the composition change resulted in different sizes. The first one was $30-50{\mu}m$ in size with the aspect ratio of 60 and above, and the second one was $600{\mu}m$ and below in size with the aspect ratio of 15 and below. The $Al_2O_3$ content in formed mullite whisker was 73.57-80.29 wt%, which is high $Al_2O_3$ content composition. The Young's modulus and the hardness measured by nano-indentation method were 136.7 GPa and 19.81 GPa, respectively.

• Journal of the Mineralogical Society of Korea
• /
• v.26 no.1
• /
• pp.27-34
• /
• 2013

X-ray powder diffraction is one of the most powerful techniques for qualitative and quantitative analysis of crystalline compounds. Thus, there exist a number of different methods for quantifying mineral mixtures using X-ray diffraction pattern. We present here the use of Rietveld and PONKCS (partial or no known crystal structure) methods for quantification of amorphous and crystallized mineral phases in synthetic mixtures of standard minerals (amorphous silica, quartz, mullite and corundum). Pawley phase model of amorphous silica was successfully built from the pattern of 100 wt% amorphous silica and internal standard-spiked samples by PONKCS approach. The average of absolute bias for quantities of amorphous silica was 1.85 wt%. The larger bias observed for lower quantities of amorphous silica is probably explained by low intensities of diffraction pattern. Averages of absolute bias for minerals were 0.53 wt% for quartz, 0.87 wt% for mullite and 0.57 wt% for corundum, respectively. The PONKCS approach achieved improved quantitative results compared with classical Rietveld method by using an internal standard.

• Resources Recycling
• /
• v.23 no.6
• /
• pp.3-11
• /
• 2014

Bottom ash from coal fired power plants is not widely used due to a broad range of particle sizes and a high carbon content for producing geopolymers. The effect of mechanical activation on compressive strength of bottom ash- based geopolymers was examined by rod and planetary-ball milling to encourage full-fledged recycling of bottom ash, the main component of pond ash. The amount of amorphous component in the milled ash samples did not change significantly after the mechanical activation. It is presumably because needle-shaped mullite crystals, which is a major crystalline phase and grown in a glassy matrix, possess high strength and toughness, and therefore, they could endure external shocks and remain almost intact. Milling operation, however, decreased the particle size and improved the homogeneity of ash, thereby leading to increase reactivity of milled ash with alkali activators. Rod milling produced a relatively narrow particle size distribution of the milled ash particles; however, it was less effective in reducing the particle size. Nevertheless, it was interesting to observe that rod milling had equal effect on improving the compressive strength of geopolymers up to about 37%, as that of planetary ball milling. Rod milling is believed to be suitable process for enhancing the reactivity of bottom ash for large-scale recycling of bottom ash and producing geopolymers.