• Korean Journal of Environment and Ecology
• /
• v.26 no.5
• /
• pp.654-667
• /
• 2012

To know the effect of construction works at the Busan New Port on the activity of otters, changes in the distribution of spraints were investigated at 5 areas(I-V) composed of 16 locations in 12 islands from 2003 to 2011. There were significant differences among the density of spraints at each area(P=0.0502), at each year(P=0.0040) and at each area during the study period(P=0.0005). The densities of spraints in the areas II (P=0.000) and IV (P=0.012) were significantly different according to whether the construction work was carried out or not at each area. It was found that the density of spraints in each area was affected by the disturbance with construction works or other factors inside and/or outside the area. The average density of spraints of the 5 areas had changed according to the process of the construction works as follows. In 2003-2005 when the construction work was proceeded mainly at the area IV, the average density of spraints of the 5 areas as well as the density in the area II increased annually, whereas the densities in the other 4 areas were low and relatively constant. This fact suggests that otters might have moved into the area II from outside the study area. In 2006-2009 when the construction works were carried out on a larger scale at the areas I, II and III, there was a little decrease in the average density of spraints during the latter two years, suggesting a little decrease in the activity of otters in the study area. As regards the density of spraints at each area, it decreased considerably in the area II, but increased fairly in the areas III and IV. Accordingly it was indicated that otters in the area II where the construction work was carried out since 2006 might have moved into the area IV with no work, and otters inhabiting the Jeodo, Geoje city, where the construction work was carried out at that time, might have moved into the area III with no work at the sea shore. In 2010-2011 when the construction works were conducted at all the areas on a fairly large scale, the average density of spraints of the 5 areas as well as the densities in the areas II, III and IV, decreased considerably compared to the those in the year 2009. This fact clearly indicates that the number of otters decreased owing to the multiple simultaneous works in this period. In conclusion, otters must be affected by the construction works at the study area, and their numbers might be decreased mainly due to the multiple simultaneous works, as well as by the long-term works resulting in the decrease of seashore, marine pollution, and reducing prey available.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1993.04a
• /
• pp.57-61
• /
• 1993

본 연구목적은 선형부분구조물과 그 부분구조물들을 결합하는 비선형연결부 로 이루어진 구조물을 해석하기 위해 비선형 연결부의 모델변화를 효과적으 로 규명하는데 있다. 제안된 방법은 시간영역에서만 계산이 가능하였던 힘- 상태 사상법을 주파수영역으로 확장함으로써, 전체구조물에서 선형부분구조 물들은 분리 해석이 가능하고, 시간영역의 많은 데이터를 줄일 수 있는 장점 이 있다. 제안된 방법의 타당성 및 장점을 검증하기 위해서 쿨롱마찰 비선형 특성을 갖는 두 가지의 구조물에 대하여 각각 실험적으로 연결부의 매개변 수를 규명하였다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.6
• /
• pp.3052-3060
• /
• 2013

When planning to construct adjacent structure by the side tunnel, the criteria of safety zone of tunnel have been proposed. There are no specific theoretical basis regarding load conditions and the distance of structure and the geological strata and the conditions of adjacent structure's location, and the conditions applied load. Two and three dimensional numerical analysis preformed to prove the deformation of the ground and structures caused by the tunnel excavation and evaluated the correlation and the suitability of the tunnel's safety zone regarding the location of adjacent structures and the changes in the modulus of deformation. This paper proposed the safety zone's range is getting bigger as the modulus of deformation is higher. Also, it seems that the possible range of construction under constraints in the diagram of revalued safety zone significantly expands as shear failure line appears on the invert extension line below the spring line.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.11 no.3
• /
• pp.87-94
• /
• 2007

A structural dynamic analysis can be divided into a time domain analysis and a frequency domain analysis. The time domain analysis makes use of a direct integration method or a mode superposition method and the frequency domain analysis applies a DFT method. Generally the DFT method is more effective method in case of calculating response of periodic excitation. But in case of transient excitation exact solution can not be acquired. So, by modifying the response or increasing the period accuracy of solution can be enhanced. Accordingly this study analyzed dynamic responses of structures under aperiodic moving load in time domain and frequence domain. Consequently it is concluded that exact solution would be get enough using DFT method by increasing the duration of free vibration or modifying the dynamic response.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 1993.04a
• /
• pp.199-206
• /
• 1993

동적무한요소를 이용한 지반-구조물 상호작용에 대하여 연구하였다. 동적무한요소는 무한원방향으로 전파되어 나가는 여러종류의 지진파 성분을 동시에 모형화 할 수 있도록 개발된 축대칭요소로서, 구조물에서 멀리 떨어진 지반영역(외부영역)을 모형화 하는데 사용되었다. 반면, 구조물에 가까운 지반영역(내부영역)은 재래의 축대칭요소를 사용하여 모형화 하였다. 본 해석방법의 검증은 적충된 반무한 지반위에 놓여진 원형강판의 임피던스함수를 구하여, 이를 이론적 결과와 비교하는 방법으로 수행되었다. 또한, 지반에 일부가 묻힌 원통형구조물에 대하여 수행된 강제진동시험 결과와 실제 지진발생시 구조물의 거동기록을 같은 입력조건에 대하여 본 해법으로 구한 결과와도 비교하였다. 해석결과로 부터 본 해석방법이 구조물의 거동을 타당히 산정하여 줌을 알 수 있었다.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.15 no.2
• /
• pp.315-327
• /
• 2002

The main objective of this study is to develop an discrete optimization algorithm of plane steel frames with rigid using second-order-elastic-plastic hinge analysis which is considering panel zone. Conventional analyses of steel frame are usually tarried out without considering the effect of panel zone deformation on frame behavior The validity of this model is established by comparison without panel zone on joint models is analyzed numerically to demonstrate the importance of using realistic models in steel frame analysis. The objective function is taken as Weight of steel frames and the constraints we formulated based on AISC-LRFD(1994). The validity of the developed algorithm we demonstrate by comparing the result with those of SAP2000. The result of the study indicates that the optimal design algorithm considering of panel zone behavior more economic design than simple steel frame design methods.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2005.11a
• /
• pp.133-136
• /
• 2005

원자현미경을 이용하여 나노허니컴 구조물의 굽힘 탄성계수를 측정하였다. 나노허니컴 구조물의 단면적은 기공들의 배열 때문에 위치마다 다르게 되고, 이로 인해 관성 영역 모멘트는 상수값으로 계산되지 않는다. 본 연구에서는 나노허니컴 구조물의 단위 면적 내 관성 영역 모멘트 평값을 벌크 구조의 나노허니컴 구조물의 영률로 가정하였다. 단위 면적 내 광성 영역 모멘트 평균값과 나노허니컴 구조물의 기공률 사이에 관계식이 유도되었다. 기공의 직경이 31 nm 인 양극 산화 알루미늄 필름이 나노허니컴 구조물로 제작되었다. 양극 산화 알루미늄의 영률이원자현미경을 이용한 굽힘 실험으로 측정되었으며, 나노 인장시험기의 인장 실험 결과와 비교되었다.

• Annual Conference of KIPS
• /
• 2018.10a
• /
• pp.830-832
• /
• 2018

사람의 출입이 없는 폐쇄된 돈사에서 돼지에 대한 자동 감시 시스템에 관한 연구는 돼지의 움직임을 탐지 및 추적함으로써 돼지의 상태를 실시간으로 분석하기 위해 진행되고 있다. 그러나 돈사 내 감시 카메라를 통한 돼지의 움직임 탐지 및 추적은 여러 환경적/구조적인 제약으로 인하여 문제점이 발생한다. 특히, 돈사 내 사료통 등과 같은 고정 구조물에 의하여 돼지를 정확히 탐지할 수 없는 문제가 있다. 본 논문에서는 이러한 고정 구조물에 가려진 돼지 영역을 탐지하기 위하여 먼저 구조물의 영역을 설정 후 제거하고, 돼지의 가려진 영역을 가려지지 않은 영역 정보를 이용하여 보정하는 픽셀 보간 기법을 제안한다. 실험 결과, 구조물에 의하여 가려진 돼지의 영역이 적절히 보간되었고, 실시간으로 처리(평균 보간 수행 시간은 2~3 msec)됨을 확인하였다.

• Journal of the Korean BIBLIA Society for library and Information Science
• /
• v.20 no.1
• /
• pp.87-100
• /
• 2009

Since the paradigm of records and archives management has been shifted toward the digital records world, information science, which is related to electronic record information's creation, management, preservation, and usage, has became increasingly significant. In the context, this article studies a research trend of information science in the records and archives management field. For the study, 99 concerned articles from five academic journals published between 2000 and 2008 are analyzed. As a result, the article finds out several research trends in this field, including researchers' preferred research subjects.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.5 no.2
• /
• pp.1-9
• /
• 1985

Two methods for the dynamic analysis of fixed offshore structures subjected to random waves are studied. They are the frequency domain method using the equivalent linearization of the nonlinear drag force, and the time domain method utilizing the Monte Carlo simulation technique for time series of random wave particle velocities and accelerations. Example analyses are carried out for two structures with different structural characteristics and for various wave conditions. A comparison has been made between the results obtained by two methods.