• Journal of the Society of Naval Architects of Korea
• /
• v.28 no.2
• /
• pp.104-117
• /
• 1991

When a body starts to move, the flow near the intersection point between a body and a free surface changes violently and rapidly in a very short initial time interval. This flow phenomena must be investigated whenever one treats the interaction between a body and a fluid, such as the motion of a floating body, sloshing in a tank, wave maker problem, entry of a body into a fluid etc.. Until Roberts(1987), it was widely accepted that a singularity exists at the intersection point. However, he showed that the singularity does not exist if a body moves non-impulsively. In this paper, an analytical solution cosistent for the case of impulsive motion of a body is obtained by including the effect of surface tension. From the characteristics of the newly obtained solution, a critical value associated with an oscillating phenomenon is found, and further more, it is shown that the oscillating phenomenon does not appear in the region where the distance form the intersection point is less than this critical value.

• Journal of Advanced Marine Engineering and Technology
• /
• v.34 no.6
• /
• pp.816-824
• /
• 2010

The forces applying to an object in the transferring pipe of waste are analyzed and the equation of motion is established in this paper. It is shown that the equation of motion becomes the 1st order non-linear differential equation. Using its general solution, the velocity of the object in the transferring pipe of waste can be expressed in the explicit form. Noting that the velocity of object is impact velocity to the elbow or curved part of the transferring pipe of waste, the kinetic energy of the object can be calculated and the necessary impact strength of inner wall is obtained. The velocity of object is also calculated and presented in the graphic forms with the condition of air velocity 30m/sec. The impact test of cast basalt tube is carried out by the free fall of a weight and the test results show that the impact strength of the cast basalt tube is sufficient to apply to protecting inner wall of the transferring pipe of waste.

• Proceedings of the Korea Institute of Convergence Signal Processing
• /
• 2005.11a
• /
• pp.155-158
• /
• 2005

MRI 스캔시 화상평면내에서 촬상대상물체의 회전은 MRI 신호에 위상오차와 불균일 표본화를 일으킨다. MRI 신호의 위상오차와 불균일 표본화에 대한 문제의 모델은 화상평면내 임의 중심과 원점에 관한 회전운동에 의해 열화된 MRI 신호들사이에 위상차가 존재함을 나타낸다. 이에 아티팩트가 포함된 MR 화상의 화질을 개선하기위해서 다음과 같은 방법을 제안한다. 우선, 2차원 회전운동의 회전각은 이미 알려져 있고, 회전중심의 위치가 미지인 경우에 대해 위상보정에 기초한 아티팩트를 보정하는 알고리즘과, 다음으로, 회전중심과 각도가 모두 미지인 2차원 회전운동에 대해 아티팩트를 보정하는 알고리즘을 제안한다. 이때, 미지 운동 파라메타를 예측하기위해 촬상대상물체의 경계바깥쪽에서 이상적인 MR 화상의 에너지는 최소가 되고, 촬상대상물체의 회전이 존재할 때 측정된 에너지는 증가한다는 성질을 이용한다. 이러한 성질을 이용해서 각 위상부호화 단계에서 미지의 회전각 크기를 추정하기위한 평가함수가 도입된다. 최종적으로 시뮬레이션 화상 및 실제화상에 적용해서 제안한 본 방법의 유효성을 확인한다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.34 no.5
• /
• pp.19-29
• /
• 2006

In this study, numerical simulation of airframes separating from a missile system has been preformed. For the time-accurate trajectory simulation, six D.O.F equations of motion of multiply connected bodies were derived and these equations have been coupled with the unstructured overset mesh technique for the treatment of independent mesh blocks moving with each body component. Applications were made for the simulation of the airframe separation at missile angles of attack of 0 and 5 degrees. It was demonstrated that the present method is efficient and robust for the prediction of unsteady time-accurate flow fields involving multiple bodies in relative motion.

• Proceedings of the Korean Society for Emotion and Sensibility Conference
• /
• 2009.11a
• /
• pp.251-253
• /
• 2009

본 연구에서는 팔의 굽힘(flexion)과 폄(extension)운동 시 물체의 무게에 따른 저크의 변화를 통해 부드러움을 정량화하고, 물체무게와 움직임의 형태(type)에 따른 동작의 부드러움을 비교하고자 한다. 10 명의 오른손잡이 남자 대학생(평균 $24.8{\pm}1.1$ 세)을 실험 참여자로 선정하였다. 물체무게(0g, 1000g)와 움직임의 형태(손등 위/아래)를 달리하여 팔의 굽힘과 폄 운동을 실시하였다. 또한 3 축 가속도 센서를 이용하여 x 와 z 축의 가속도를 측정하였고, 측정된 신호로 부터 저크값을 추출 하였다. 실험은 총 8 분으로 4 개의 block 으로 구성되며 각 block 은 resting 구간 1 분과 lifting 구간 1 분으로 구성된다. 실험 결과 물체무게 0g 에 비해 1000g 에서 가속도와 정규저크 값이 유의미하게 감소하였다.

• Journal of KIISE:Computer Systems and Theory
• /
• v.30 no.11
• /
• pp.621-628
• /
• 2003

This paper addresses a method of enabling objects in an image to have apparent 3D motion. Many researchers have solved this issue by reconstructing 3D model from several images using image-based modeling techniques, or building a cube-modeled scene from camera calibration using vanishing points. This paper, however, presents the possibility of image-based motion without exact 3D information of scene geometry and camera calibration. The proposed system considers the image plane as a projective plane with respect to a view point and models a 2D frame of a projected 3D object using only lines and points. And a modeled frame refers to its vanishing points as local coordinates when it is transformed.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.10a
• /
• pp.337-338
• /
• 2010

Projectile is said that objects thrown on the ground of the atmosphere. This objects exercises the parabolic motion because of the fact under the influence of gravity in the direction perpendicular and it does not include the horizontal force neglecting air resistance. In this paper, the experiment target is where subsidence occurred by that some of the road is lost to a certain depth using projectile motion. It says how far away and falling from the edge of the road when you have gone over the edge of depressed road that a car was driving at a constant speed.

• Journal of the korean Society of Automotive Engineers
• /
• v.16 no.3
• /
• pp.12-18
• /
• 1994

본 연구에서는 운전 시뮬레이터의 구성에 이용될 효율적인 차량 시뮬레이션 프로그램을 개발하기 위해 세가지 방법으로 연구를 수행하였다. 우선 효율적인 운동방정식의 구성을 위해 부호계산용 상용프로그램 MACSYMA를 이용하여 다물체게의 운동방정식을 부호적으로 유도하는 운동방정식 유도 프로그램을 구성하였고, 이를 이용하여 15자유도의 다물체 차량모델에 대해 시뮬레이션 프로그램을 개발하였다. 또한 차량모델을 개선하여 가면서 계산시간을 줄였으며, 차량시뮬레이션 프로그램에서 이용될 효율적인 수치해법을 결정하였다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.34 no.2
• /
• pp.17-25
• /
• 2006

In the present study, a 2-D chimera technique for overlapped bodies in relative motion is developed using unstructured triangular meshes. The solid boundary nodes located next to the intersecting point between bodies are merged to the intersecting point to assure accurate representation of the intersecting region. In order to assign proper value of flow variables at the nodes located out of the computational field, interpolation is conducted for non-active nodes. For validation, the motions of a NACA64A006 airfoil and a NACA0012 airfoil with a plane flap are computed and the results are compared with other simulations. The motion of a launching missile ejected from a NACA0012 airfoil is also simulated.

• Journal of the KSME
• /
• v.28 no.2
• /
• pp.150-155
• /
• 1988

공학의 기본을 이루고 있는 Newton의 역할은 고체역학과 유체역학으로 분류가 되며 고체역학은 다시 정역학과 동역학으로 세분된다. 동역학은 가속의 운동을 가진 물체를 다루는 학문으로 다시 두 부분으로 나누어진다. 하나는 운동학(kinematics)이고 다른 하나는 운동역학(kinetics) 이다. 운동학은 운동자체 즉 속도, 가속도만을 취급하며 운동역학은 운동을 일으키는 힘과 그 결과로 생기는 운동을 연관짓는 학문이다.